A program for formatting a flash drive. The best flash drive formatting software. HP Formatting Software

Program HP USB Disk Storage Format Tool developed by Hewlett-Packard, is convenient to use, weighs only 96 Kb and does not require installation on a computer. But about everything in order.

To begin with, let's figure out why it is necessary to format flash drives.

The first reason. You want to write a file on a USB flash drive that is larger than 4 gigabytes in size, and you cannot do this. Indeed, it will not be possible to record a movie or an ISO image of a large size, because many manufacturers release flash drives in FAT32 format, and it does not support the transfer of large files. To do this, format the USB flash drive in NTFS format.

The second reason. You checked the USB flash drive for viruses and the antivirus program did not find anything suspicious, but you still have suspicions that there is still something there. Therefore, it is better to format the flash drive.

The third reason. The flash drive began to work more slowly. The fact is that after deleting unnecessary files, clusters remain in the flash drive or, in other words, empty places that slow down its operation. Formatting will fix this problem.

The fourth reason. You want to make a bootable flash drive from an ordinary flash drive so that you can install an operating system from it. To do this, you also need to perform formatting.

That’s probably all. Now download the HP USB Disk Storage Format Tool. You can do this by clicking on the link below.

Before formatting a USB flash drive, make sure that there are no important files and folders left on it, as all data after formatting will be destroyed.

The HP USB Disk Storage Format Tool is used to format a USB flash drive and create a bootable USB flash drive. It works with devices via the USB port and supports three file systems: FAT16, FAT32 and NTFS. It also restores or eliminates bad sectors on a flash drive, and performs forced formatting, that is, ignores open or executable files.

After you have downloaded the installation file, double-click on it and click on the “Run” button.

The main window of the program opens. In the "Device" section, select the USB flash drive that you will format. If you have several USB devices connected, in order not to make a mistake, check by name and size.

Now go to the choice of the file system - “File system”. If you plan to record large size movies on a USB flash drive, it is better to choose NTFS. If you make it bootable: FAT32.

In the “Volume label” field, enter a name for the flash drive.

"Quick format" - allows you to perform quick formatting. With quick formatting, data that was on a USB flash drive can be restored. With full formatting, data is completely destroyed - overwritten with zeros.

“Enable Compression” - allows you to compress data in NTFS format.

“Create a DOS startup disk” - used to create a bootable flash drive.

Click on the “Start” button. The next window warns that all files from the flash drive will be deleted, click "Yes."

We are waiting for the device to be formatted.

I hope you have no problems now, and hP USB Disk Storage Format Tool will be useful to you.

Rate this article:

05.01.2016

In this article, we will consider several programs for formatting flash drives. USB flash drive device that allows you to store and share information. If, for example, a device is infected with viruses, or if you want to change the file system format to NTFS, FAT 32, exFAT, you can format it.

To format a USB flash drive, you will need to use one of the following programs or utilities:

HP USB Disk Storage Format Tool

The utility was developed by Hewlett-Packard and is designed to format flash drives and memory cards in NTFS, FAT, FAT32. It works through the USB 2.0 port. The utility allows you to create bootable DOS devices, this is useful if you need to install Windows, for example. The program interface is easy and intuitive. Formatting a device can be done in just a couple of steps. Also, the utility is completely free.

HDD Low Level Format Tool

The program can return the status of USB flash drives and hard drives to its original state (factory), filling the device with zero bytes. This operation will completely delete all available information on the media, including viruses. The program interface is quite simple. Here you can view all the information about the storage medium: file system, size, serial number, buffer size, and of course format it.

SDFormatter

Format SD card SDFormatter

The program is designed to format SD cards that are used in phones, cameras, players. Thanks to the use of special formatting methods, including the relevant specifications of SD cards, the utility can help in situations where other software tools are simply useless. The program interface is extremely simple, and to format the card you need to perform just a few steps.

Format the USB flash drive using the Windows system utility

Also, do not forget that full formatting can be performed using standard Windows tools. To do this, simply insert the media into the USB port and right-click on it in the “My Computer” window and select the “Format” line. Next, select the desired file system format and format the USB flash drive. To format a USB flash drive in this way, you do not need to download anything.

Format the flash drive using standard Windows tools

Convert.exe utility supported by the command line

To change the file system, it is not necessary to erase all data from the USB flash drive. To format a USB flash drive without losing data, you can use the Convert.exe utility and the command line. To format a USB flash drive, no programs need to be downloaded.

To do this, open the command line and enter the following command:

convert<буква_флешки>: / fs: ntfs / nosecurity / x

in my case it will be: convert F: / fs: ntfs / nosecurity / x

Format the flash drive without deleting data

Introducing programs for reliable flash drive formatting

In this article, we will analyze such a question, what program to choose for formatting flash drives. Nowadays, flash drives of different types are used everywhere.

ATTENTION!We highly recommend reading a note on cleaning laptops. This is one of the main problems of beech breakdowns as a result of overheating! If all the heated air does not come out of the beech, do you think whether internal parts can burn out from elevated temperatures? Of course, yes, that’s why you need to know this question very well.

Let's get down to business ...

Introduction

For convenience and speed (in moving information) - it’s better not to find a flash drive. But like any device, a flash drive can fail, that is, break. Their failures are different.

For example, if it is a mechanical malfunction, such as a flash drive dropped to the floor and stopped reading, or a flash drive has been in the water and so on. Such damage is usually almost not repaired, only if in a specialized repair.

But since their prices are not very high right now, repairing them in a specialized service is not profitable, unless the flash drive had very important data that can often be restored.

From this we can conclude that the flash drive is a rather fragile device and careless use of it can lead to its breakdown and loss of all data on it.

Formatting a flash drive

But it also happens that a USB flash drive just needs to be formatted, in order to improve its performance or change the file system, install ntfs or fat32. Of course, this can be done in the standard way in the operating system ( go into my computer - right click on the "properties" flash drive - format), but this does not always help.

But for this case, there are many different programs that help not only change the file system but also return the flash drive to "life" or improve its speed. These are the programs we will analyze in this article.

Such advice, if you decide to find a program for formatting a flash drive, then it is advisable to use the same as the manufacturer of the flash drive. For example, if you have Kingston, it is advisable to select a utility for Kingston flash drives, but it only has such an opportunity, if you don’t or do not want to bother with the search, then simply use the ones presented below.

But this is not always possible to do, so that it is possible to fully use universal for all types of drives.

Let's move on to downloading flash drive formatting programs - we present below 2 the most effective and popular

The first program we will analyze will be HP USB Disk Storage Format Tool. A very good tool to fulfill our goal.

Also, you can download it from the official site. The program can be downloaded from this link http://www.teryra.com/articl_comp/kak_otformatirovat_fleshky/HPUSBFW.ZIP (copy, paste in your browser and press enter). The program does not need to be installed, just run it.

It is packed in an archive, in order to start it, an archiver may be required, in general it is a standard program, how and where to download it can be found in the article how to open a rar file.

And so, the HP USB Disk Storage Format Tool program is very easy to use. All that is needed is:

Run her
Indicate your flash drive in the first line
Next, specify the file system, preferably NTFS, although you can also FAT32
And check the Quick Format line. There is a slight caveat. If you just need to change the file system, for example from FAT32 to NTFS, then put a tick. A checkmark indicates that formatting will be fast. If we need to correct the incorrect operation of the flash drive or you cannot write files to it at all, then we do not check. This means that formatting will be complete. With full formatting, in simple terms, some errors accumulated on the flash drive are corrected and maybe after this process it will work better.

Do not forget that formatting removes all information from a flash drive, so that if we copy something important

If everything is indicated, then click "Start":

The next program is the hdd low level format tool

In order to download it, click here:

Install hdd low level format tool

The installation process is standard, everywhere we click on and on, only in the window of the license agreement we click "Accept".

The entire program is installed, the only thing is that it is paid and at startup a window will appear asking you to pay or use for a limited time. But we have enough to complete several operations.

If you don’t want to pay, then select a trial version, that is, click the bottom line “Continue for free”:

The program looks like the one below. In our case, as we see the program identified two devices, it is a hard disk of 1.5 Tr. and a 16 GB flash drive:

How hdd low level format tool works

This program approaches the formatting process more thoroughly. It conducts low-level formatting (as stated, although it is believed that this process can only be started in the factory, but still try).

In the process of this formatting, sectors are edited, and bad zones are eliminated. It can show the technical condition of the hard drive (only on hard drives), for this, in the initial window for selecting devices, select your hard drive and click “Continue”, and then go to the S.M.A.R.T. and click on the button “Get Smart Data”:

In order to format the USB flash drive in the initial window, select it ( ATTENTION! HERE VERY ATTENTIVELY, WE CHOOSE UNLIMITEDLY, not format your hard drive and lose all the data accumulated over a long time), click "Continue":

In the next window, go to the LOW-LEVEL FORMAT tab and click on “Format This Device” at the bottom. The process of low-level formatting will begin, in time it will take minutes from 40 to several hours:

This program often helps to cope with such a problem as, for example, a flash drive has stopped reading or has started to work slowly. It is very important to do everything slowly and deliberately. If in doubt, it is better to ask someone else than to regret hasty actions.

So we examined such an interesting and popular question as a program for formatting flash drives. This is very useful information. Thanks to her, in many cases you can rid the flash drive of the problems that have arisen.

Good day.

Questions regarding the operation of the hard drive ( or as they say HDD) - always a lot (probably one of the most numerous areas). Often enough to solve a particular issue - the hard drive must be formatted. And here, some questions overlap with others: “But how? With what? This program does not see the disk, which one to replace? ”, Etc.

In this article I will give the best (in my opinion) programs that help to cope with this task.

Important! Before formatting the HDD of one of the presented programs, save all the important information from the hard disk to other media. During the formatting process, all data from the media will be deleted and recovering something is sometimes extremely difficult (and sometimes impossible at all!).

"Tools" for working with hard drives

Acronis disk director

In my opinion, this is one of the best programs for working with a hard disk. Firstly, there is support for the Russian language (this is important for many users), secondly, support for all Windows OS: XP, 7, 8, 10, and thirdly, the program has excellent compatibility and “sees” all disks (unlike from other utilities of this kind).

Judge for yourself, you can do “anything” with the hard disk partitions:

format (in fact, for this reason the program was included in the article);
change file system without data loss (for example, from Fat 32 to Ntfs);
resize partition: it’s very convenient if, during the installation of Windows, for example, you allocated too little space for the system drive, and now you need to increase it from 50 GB to 100 GB. You can format the disk again - but you will lose all the information, and with this function you can change the size and save the data;
hard drive partitioning: for example, they divided the hard drive into 3 partitions, and then thought, why? It is better to have two: one system for Windows, and the other for files - they took and merged and did not lose anything;
disk Defragmenter: useful if you have the Fat 32 file system (with Ntfs - there isn’t much point, at least you won’t win in performance);
change drive letter;
delete partitions;
view files on disk: useful when you have a file on your disk that cannot be deleted;
the ability to create bootable media: flash drives (the tool will simply save if Windows refuses to boot).

In general, to describe all the functions in one article is probably unrealistic. The only minus of the program is that it is paid, although there is time for the test ...

Paragon partition manager

This program is well known, I think that users with experience have long been familiar with it. Includes all the most necessary tools for working with media. By the way, the program supports not only real physical disks, but also virtual ones.

Key features:

Using discs over 2 TB in Windows XP (using this software you can use larger disks in the old OS);
Ability to control the loading of multiple OS Windows (it’s very important when you want to install Windows for your first OS - one more. For example, to test a new OS before finally switching to it);
Easy and intuitive partitioning: You can easily split or merge the required partition without data loss. The program in this sense fulfills without any complaints at all ( by the way, it is possible to convert the basic MBR to GPT disk. Regarding this task, especially a lot of many questions recently );
Support for a large number of file systems - This means that you can view and work with partitions of almost any hard drive;
Work with virtual disks: easily connects a disk to itself and allows you to work with it like a real disk;
A huge number of backup functions and recovery (also very relevant), etc.

EASEUS Partition Master Home Edition

An excellent free (by the way, there is also a paid version - it implements several additional functions) tool for working with hard drives. Windows OS supported: 7, 8, 10 (32/64 bits), there is support for the Russian language.

The number of functions is simply amazing, I will list some of them:

support for various types of media: HDD, SSD, USB-stick, memory cards, etc .;
changing hard drive partitions: formatting, resizing, merging, deleting, etc .;
support for MBR and GPT disks, support for RAID-arrays;
disk support up to 8 TB;
the ability to migrate from HDD to SSD (though not all versions of the program support it);
the ability to create bootable media, etc.

In general, a good alternative to the paid products presented above. Even the functions of the free version will suffice for most users.

Aomei Partition Assistant

Another worthy alternative to paid products. The standard version (and it is free) has a bunch of functions for working with hard drives, supports Windows 7, 8, 10, there is a Russian language (although it is not set by default). By the way, according to the assurances of the developers, they use special algorithms to work with "problem" disks - so that there is a chance that your "invisible" disk in any software will suddenly see Aomei Partition Assistant ...

Key Features:

One of the lowest system requirements (among software of this type): a processor with a clock frequency of 500 MHz, 400 MB of hard disk space;
Support for traditional HDDs, as well as new-fangled solid-state SSD and SSHD;
Full support for RAID arrays;
Full support for working with HDD partitions: combining, partitioning, formatting, changing the file system, etc .;
Support for MBR and GPT disks, up to 16 TB in size;
Support for up to 128 disks in the system;
Support for flash drives, memory cards, etc .;
Support for virtual disks (for example, from programs such as VMware, Virtual Box, etc.);
Full support for all the most popular file systems: NTFS, FAT32 / FAT16 / FAT12, exFAT / ReFS, Ext2 / Ext3 / Ext4.

MiniTool Partition Wizard

MiniTool Partition Wizard is free hard drive software. By the way, it’s not very bad either, which only indicates that over 16 million users use this utility in the World!

Features:

Full support for the following OS: Windows 10, Windows 8.1 / 7 / Vista / XP 32-bit and 64-bit;
The ability to resize a partition, create new partitions, format them, clone them, etc .;
Convert between MBR and GPT disks (without data loss);
Support for converting from one file system to another: we are talking about FAT / FAT32 and NTFS (without data loss);
Backup and restore information on disk;
Windows optimization for optimal operation and migration to an SSD drive (relevant for those who are changing their old HDD to a newfangled and fast SSD), etc .;

HDD Low Level Format Tool

This utility does not know much of what the above programs can do. Yes, in general, she can do only one thing - to format the media (disk or USB flash drive). But not to include it in this review - it was impossible ...

The fact is that the utility performs low-level disk formatting. In some cases, it is almost impossible to restore the hard drive to function without this operation! Therefore, if no program sees your disk, try HDD Low Level Format Tool. It also helps to remove ALL information from the disk without the possibility of recovery (for example, you do not want anyone on the sold computer to be able to recover your files).

In general, I have a separate article about this utility on my blog (in which all these "subtleties" are described):

About 10 years ago, by the way, one program was very popular - Partition Magic (it allowed formatting the HDD, partitioning the disk, etc.). In principle, you can use it today - only now the developers have ceased to support it and it is not suitable for OS Windows XP, Vista and higher. On the one hand, it’s a pity when they stop supporting such convenient software ...

That's all, a good choice!

Low level flash drive formatting- This is marking the flash device into sectors for recording service information necessary for its operation. This process completely erases the information from the drive and subsequently, it is impossible to recover. Therefore, this action is advisable to carry out in cases where it is necessary to prevent the confidential information from entering third parties or to block damaged sections of the flash drive so that they are not recorded (and the flash drive is not dull).

Important: without special need, it is highly undesirable to resort to these actions!

How to make low-level flash drive formatting?

Formatting our flash drive using a low level will help us.

Download and install the program. Run it and select “Continue for free” (1):

This will allow you to use the program for free.

In the window that appears, you will see a list of storage devices connected to your computer and available for formatting. Select your USB flash drive from the list provided (1.10) and double click on it.

A new window opens with information about the flash drive. You will need the “Low-level format” tab (2), click on it. Here, the actions performed by our utility during formatting will be displayed.

To start formatting, click the “Format this device” button (3):

You will see a warning about the destruction of all information on the selected medium, click "Yes":

Formatting starts, the current process of which you can observe by indicator (4) (a filled bar). You can also see formatting details (5) below the indicator.

You will learn about the end of formatting by indicator (6) - it will be completely filled, and by the inscription “100% complete” (100% completion) (7) below the bar:

Now you can close the program.

Low-level formatting deleted all data on the media, including the media file system. So you can’t get on such a device. Therefore, to resume normal operation of the flash drive, after low-level formatting, high-level formatting must be performed. Before that, you need to decide on.

Find out which fs is right for you? Go to formatting! How this is done - I already wrote, read below:

I think you figured it out and successfully conducted low-level formatting of the flash drive.

Problems