For example, like this. The first photo hit an unnecessary empty basket. On the second I removed it.

For a long time we used the wonderful Webinpaint website, in which such objects were cleaned easily and quickly, in three clicks. On this site, I had a lesson posed in 2010, which. The lesson went very far during this time, and many used it. But now the SITE has been MADE PAID, and I get a lot of questions and requests to find something like that.
   Alas, everything in our world is getting more expensive, and all such sites are now paid. Therefore, for everyone who does not know how to use Photoshop, I will show you how to remove an unnecessary object in a photo using Photoshop- online Pixlr, simply called EDITOR

If you just want to remove an object against a colored background, you can do this using the BRUSH tool. For example, take this picture. And remove it for a month.

Since here the object is on a uniform, blue background, we take the BRUSH tool.

And select a color to paint over an unnecessary object.
   1- open the color selection.
   2.- We click the brush in the place what color we need to paint over the object. COLOR PROGRAM WILL CHOOSE YOURSELF.
   3.- Confirm the color choice.

Now select the size of the brush and paint over the object with it. The one that we need is lit in the color selection window.

Now just paint over the unwanted object. That's all.

ATTENTION. This is the easiest way to remove an object, since it needs ONE color. If the unnecessary object is located on several colors, then you need to CHOOSE COLOR every time. Although it is not difficult, since it is automatically selected. But pretty tedious.

But if the object we do not need is located on grass, sand, the background of the forest, and so on, then nothing can be done with a simple selection of colors. Then we begin to use the stamp tool.
   We take a picture from the previous lesson. And remove the Christmas tree in the foreground as well.

We go to the site   at Pixlr.com Editor.  , and upload the picture.

ATTENTION. If you insert a picture from the Internet, then inserting its address, a download sign will appear. Just wait until the picture is loaded, then the plate will be removed by itself.
   Select the STAMP tool, its size and shape.

Getting to work. We take the Stamp tool and, holding down the Ctrl key, select the cloning source, simply clicking on it (it should be next to the object to be cleaned; this is essentially what we will sketch this object with):

ATTENTION! Note that the copy point moves with the stamp tool, that is, you periodically, if the pattern does not match, you must set a new copy point using the Ctrl key.
   In our example, the top of the Christmas tree is on the background of red Christmas trees. Having set the copy point, I painted the top red. Then the yellow grass went, and I again set the copy point, holding down the Ctrl key, I select the cloning source - GRASS.

And I go to the bottom where there is green grass, and I also set the copy point, holding down the Ctrl key, I select the cloning source - GREEN GRASS

And remove the lowest part of the tree. That's all.

Believe me, this is done much faster than I describe. Hold down the Ctrl key, click, paint over the desired part, click the Ctrl key again, and paint over again. Everything is pretty fast.

Recover lost texture. As you can see, when sketching the Christmas tree below, the grass was slightly broken, so I suggest restoring it also with the Stamp tool. Select a cloning source with a good texture and, using a large stamp brush, preferably a square one, draw a place with a broken texture.

If everything suits us, then we save our photo. Click FILE - SAVE, or click on the cross in the right corner. We write the name of our picture, select the format and click on "Yes"

This is what we got, with a slightly tweaked texture.

So pretty quickly, you can remove all unnecessary objects from your photos. Do not be afraid to spoil something, you can always cancel your actions, or paint over a new one. Try it boldly and you will succeed!

If you just want to remove an object against a colored background, you can do this using the BRUSH tool. For example, take this picture. And remove it for a month.

Since here the object is on a uniform, blue background, we take the BRUSH tool.

And select a color to paint over an unnecessary object.
   1- open the color selection.
  2.- We click the brush in the place what color we need to paint over the object. COLOR PROGRAM WILL CHOOSE YOURSELF.
  3.- Confirm the color choice.

Now select the size of the brush and paint over the object with it. The one that we need is lit in the color selection window.

Now just paint over the unwanted object. That's all.

ATTENTION. This is the easiest way to remove an object, since it needs ONE color. If the unnecessary object is located on several colors, then you need to CHOOSE COLOR every time. Although it is not difficult, since it is automatically selected. But pretty tedious.

But if the object we do not need is located on grass, sand, the background of the forest, and so on, then nothing can be done with a simple selection of colors. Then we begin to use the stamp tool.
  We take a picture from the previous lesson. And remove the Christmas tree in the foreground as well.

We go to the site   at Pixlr.com Editor.  , and upload the picture.

ATTENTION. If you insert a picture from the Internet, then inserting its address, a download sign will appear. Just wait until the picture is loaded, then the plate will be removed by itself.
  Select the STAMP tool, its size and shape.

Getting to work. We take the Stamp tool and, holding down the Ctrl key, select the cloning source, simply clicking on it (it should be next to the object to be cleaned; this is essentially what we will sketch this object with):

ATTENTION! Note that the copy point moves with the stamp tool, that is, you periodically, if the pattern does not match, you must set a new copy point using the Ctrl key.
   In our example, the top of the Christmas tree is on the background of red Christmas trees. Having set the copy point, I painted the top red. Then the yellow grass went, and I again set the copy point, holding down the Ctrl key, I select the cloning source - GRASS.

And I go to the bottom where there is green grass, and I also set the copy point, holding down the Ctrl key, I select the cloning source - GREEN GRASS

And remove the lowest part of the tree. That's all.

Believe me, this is done much faster than I describe. Hold down the Ctrl key, click, paint over the desired part, click the Ctrl key again, and paint over again. Everything is pretty fast.

Recover lost texture. As you can see, when sketching the Christmas tree below, the grass was slightly broken, so I suggest restoring it also with the Stamp tool. Select a cloning source with a good texture and, using a large stamp brush, preferably a square one, draw a place with a broken texture.

If everything suits us, then we save our photo. Click FILE - SAVE, or click on the cross in the right corner. We write the name of our picture, select the format and click on "Yes"

This is what we got, with a slightly tweaked texture.

So pretty quickly, you can remove all unnecessary objects from your photos. Do not be afraid to spoil something, you can always cancel your actions, or paint over a new one. Try it boldly and you will succeed!

Many liked teorex Inpaint program,  which allows you to intelligently remove unwanted elements in a digital photo, such as unwanted objects, text, accidentally falling elements, as well as dust, advertising, debris, scratches and dirt.

However, the developers of the program are so kind that they offer to process your pictures online. To do this, a special site was created with a service for removing unnecessary objects in images - webinpaint. Working with him is very easy.

Loading a picture (Load Image)

Paint over the unnecessary part.

Other buttons: Inpain (start deleting objects), save, cancel (highlight), tool diameter, etc.

Press the “Inpaint” button and wait for the result. With some skill, you can achieve good quality.

Programs and services for removing unwanted objects in photos

Often in photographs appear objects, people and other objects that spoil the overall picture or are absolutely not needed in this photo. The Americans call this the “bomb."

Delete unwanted objects in the image  - A difficult matter for beginners. However, it is absolutely not difficult if you look at the issue. You can use the new excellent features to remove unwanted items in the photo, which are provided in Photoshop CS5. In detail, the new Photoshop features are shown in another post. By the way, you could see the post with the most famous sensational photos that were created using graphic editors.

There are such cases when the frame turned out to be insanely cool, but some objects interfere: passers-by, cars, wires, birds and other random objects. In this article, we will tell you how to remove an item from a photo on your phone in seconds!

Snapseed

If you don’t know how to remove unnecessary items from the photo online and free, then use the application Snapseed. This is the easiest option of all presented. You can download it for free in the official AppStore and Google Play stores.

How to remove an unnecessary item from a photo:

1. Open the Snapseed app.
2. Click Tools-Spot Correction.
3. Zoom in with your fingers.
4. Careful tap on the screen to remove the object or object from the photo in Snapseed.

Facetune

The second application, which removes objects in the photo, is called Facetune. The program is paid, but it often happens on skikds in the AppStore (for only 15 rubles). If you do not want to buy the application, then you can use a free analog Facetune 2. It has exactly the same function.

How to remove an item from a photo on an iPhone and Android:

1. Open Facetune.
2. At the bottom, go to "Patch".
3. Click on the item to be removed. 2 circles will appear. The first is the zone of the subject, and the second is a circle with the surface on which the first part can be replaced. Circles can be moved in any direction, choosing the best option.
4. Use precise movements to process the photo and save it to the Gallery.

Touch Retouch is a program that removes objects in a photo in minutes. But it is paid, it costs 149 rubles (price for 2018).

Photoshop Fix

The application will help to remove an unnecessary item or people with photos on the phone Photoshop Fix. It is absolutely free available for download in official stores.

How to remove an item from a photo through the application:

1. Open Photoshop Fix.
2. Register or log in via Facebook or Google Play.
3. Open the desired photo.
4. In the bottom menu, click on the patch icon "Recovery".
5. This program has Point recovery, there is Stamp, Patch, Red eye  and Eraserthat restores if you don’t like something.
6. For processing, it is best to zoom in on the photo with the touch of your fingers.
7. If you have selected "Stamp", then first you need to click on the surface next to the unwanted item and put a mark (circle), but where it is not. It is by cloning this area that we will remove the object from the photo.
8. Touch with your finger the element that you want to remove from the photo, and gently erase it step by step.
9. Save photo to Gallery!

Union

And the last program that removes excess objects from the photo is called Union. The application is paid and costs 379 rubles (price for 2019).

How to remove an item from a photo in the photo editor:

1. Open application Union.
2. For Background  upload the snapshot in which you want to make changes.
3. For Foreground  upload a clean photo where there are no foreign objects: wires, cars, people, etc.
4. So that the layers lay evenly on top of each other, you can remove a bit of intensity, and then return it back.
5. Click on the Mask  and Eraser  gently erase the entire layer.
6. Then tap on the brush and paint over all the unnecessary space.
7. If you want to repeat the layer mask, then click Flatten  and add photo to Foreground.
8. Save image to Gallery.

Be the most stylish! Use super effects.