How to use the ultraiso program. How UltraISO Works How to use UltraISO to burn a disc

Opportunities

creating an ISO image from any data stored on the hard drive;
burning CD / DVD images;
creating bootable distributions of Windows;
optimization of the file structure of the image;
extract data from an image file;
editing image content;
file conversion;
add / delete / rename files in the finished project.

Advantages and disadvantages

russian-language menu;
support for multiple formats;
creating bootable disks;
editing the created copy without the need to overwrite it.

the program is shareware (it has a limit on the volume of recorded files - not more than 300 MB, it also has a limited validity period of 1 month);
only one OS is supported - Windows;
irregular release of updates.

Alternative programs

Alcohol 120%. A free program with which you can make virtual copies of optical discs. Allows you to record images, play them in virtual drives, copy information from disk to disk, protect the created files with a password. Works with almost all types of protected drives.

nLite. A free application that can create an assembly of the necessary components for the Windows OS. Integrates driver packages into the main distribution kit, configures services, changes accounts, creates an ISO image of a boot disk with the possibility of subsequent burning to CD / DVD, makes settings in the registry.

How to use

1. Create a boot disk

Launch the program and open the “Tools” tab. Select the option “Burn CD image” or press the “F7” key:

Instruments

In the next window, mark the desired file, set the optimal speed and recording method:

Speed \u200b\u200band Recording Method

Click the “Record” button and wait for the process to complete.

2. Writing a disk image to a USB flash drive

Connect the USB stick to the computer. Run the program and open the necessary image by applying the commands "File", "Open":

Image discovery

After that, go to the “Self-loading” tab and click on “Burn hard disk image”:

Burn disc

Then select your USB stick and the specified recording method:

Media selection

Format the drive by clicking the "Format" button, select the file system:

Formatting

Click the “Record” button (in the previous window) and wait for the process to complete.

3. Creating a virtual drive

Run the program, open the "Options" menu, the "Settings" item:

Settings

Go to the tab "Virtual Drive", note the number of virtual disks. Pay attention to the drive letter. Under it, the created drive will be defined in the system.

Virtual drive

Then open the "Tools" menu, the item "Mount in a virtual drive." In the next window, select the image file and apply the "Mount" button:

Mounting

UltraISO is a functional software product designed to perform numerous operations with disk images.

UltraISO is one of the most popular disc burning software. This program allows you to burn discs, create or edit disk images, create bootable flash drives, emulate the operation of discs. UltraISO supports almost all popular disk image formats, as well as all major types of optical storage media.

It is almost impossible to consider all the functions of this program in one article. Therefore, in the article on how to use UltraISO, we will consider only the most common scenarios.

The first thing we will look at is writing ordinary files to disk using UltraISO. To do this, run the program and drag the necessary files to the top of the window.

After you drag the necessary files into the UltraISO program, in the upper part of the window you can see how much the added files occupy.

Make sure that the volume of files added to the recording does not exceed the disk capacity. After all the files are added to the UltraISO program, you can start recording. To do this, click on the "" button.

Here you can select the drive and recording speed. In order to start writing files to disk, click on the "Burn" button.

If you do not know how to use UltraISO, then you will probably be wondering how to create an image from individual files using this program. The beginning of the process is exactly the same as in the case of writing files to disk. You need to run the program and add the necessary files to it. After you add the files, open the menu “File - Save As”.

After that, the window for creating a disk image will open.

At the end of the download, the created disk image will lie in the selected folder.

Also, you can already existing disk. To do this, insert the disk whose image you want to get, and click on the "Create CD image" button.

After that, the “Create CD / DVD image” window will open before you.

Here you can select the optical drive (in which the drive is installed), specify the folder for saving the disk image, and also select the disk image format. In order to start the process of creating a disk image, click on the “Make” button.

After the process is completed, the disk image will be saved in the folder you specified.

Now it’s hard to imagine a person who would not have a computer at home. Unfortunately, unforeseen circumstances can happen that can only be solved by reinstalling the operating system. This article will discuss how to install an operating system on a flash drive using the UltraISO program, and how to install 7 from a flash drive.

Preparing a flash drive to install a Windows 7 image on it

Depending on the size of the image with the operating system, you need to choose the right size flash drive. After that, if you have any files on it, you need to save them on another medium, since (Important!) All data will be deleted when formatting and installing the system image.

After all the necessary files from the flash drive have been saved, it must be formatted. To do this, go to My computer, select the USB flash drive and, right-clicking on it, select format in the context menu.

In the window that appears in the "Capacity" section, you need to check the size of your flash drive. In the "File System" section, leave the NTFS format. In the section "Cluster size" leave the default. Be sure to check the box "Quick formatting". After the done procedures it is necessary to press the button “Format” and confirm the beginning of the procedure. When finished, a window appears with a completion message. The flash drive is ready for.

Install UltraISO

First of all, you need to download the distribution package of the program. It is recommended to do this from the official website of the developer. When the UltraISO program is downloaded, run the file.

In the window that appears, you must accept the license agreement and click the button next.

After that, select the path where the program will be installed or you can leave it by default.

Do not forget to sign UltraISO, as it should be displayed in the Start Menu. After that we indicate the necessary parameters:

shortcut on the desktop (as a rule, it is necessary for quick access to the program);
associate an .iso file with UltraISO (you need to check the box next to this .iso file to open using this program);
install ISOCD / DVD emulator (allows you to install a virtual drive with which you can open .iso files).

When all the settings have been made, click the "Install" button. After the installation of UltraISO is completed, in the window that appears, click the “Finish” button. Installation is complete and the program is ready to use.

Burning an operating system image to a USB flash drive using UltraISO

Before you make sure you have an image file with the .iso extension. If there is none, you need to create it from the disk or download it from the Internet. In order to, you can use any program to create an image or make it in UltraISO. To make it in this program it is necessary:

Insert the operating system disc and run UltraISO in the trial period.
In the program, find the icon with the image creation, or Tools / Create CD image, or press the F8 button on the keyboard.
In the window that appears, you need to select the drive on which the system is installed, the place where to save the image file, select the .iso format and click the create button.

After the process of forming the distribution of Windows 7, you need to write it to a USB flash drive. To do this, without leaving the UltraISO program, click File / Open, find our downloaded system image and click "Open."

After that, go to the menu Boot / Burn Hard Disk Image.

In the window that opens, you need to select your USB flash drive in the Disk Drive field and re-format it, and only then click the "Burn" button.

In the next window you need to confirm the continuation of the process. We are waiting for the installation to complete, after which we press the "Back" button and close the UltraISO program. An image of the Windows 7 operating system is installed.

Installing flash drive boot in BIOS

When you turn on the computer, you must enter the BIOS using the Delete (Del), Esc, or F2 buttons on the keyboard to set boot priorities. Be sure to insert a USB flash drive before turning it on, as there are cases that some equipment does not determine this type of media and may simply not see it if you insert it after turning it on.

After you enter the BIOS, go to the Boot tab and set the priority of starting USB-HDD first. As a rule, everything is changed using the F5 and F6 buttons, but it can be different (it will be indicated on the right how it can be changed).

Install Windows 7

We proceed directly to installing the operating system on the computer. When exiting the BIOS, the computer must restart and a prompt appears with any key pressed to continue loading. If this does not happen, then either the information on the USB flash drive is incorrectly recorded, or the drive cannot read it, or the settings in the BIOS were not saved.

After pressing any key, the necessary Windows 7 files should download. After this procedure is completed, a window appears with a choice of language, keyboard layout.

Select the necessary parameters and click on. In the next window, click the "Install" button. Then the choice of operating system appears. Selecting the Windows 7 we need, click on the button next.

Be sure to agree to the license agreement and continue by selecting the full installation.

In the window that appears, a list of disks on which you can install your system will be presented. Before installing, be sure to configure the desired drive. To do this, click on the "Disk Settings" button below (in the English version, "Drive options").

On the selected, click the "Format" button to delete all data. Format required in NTFS format. After formatting is complete, select the disk and click next. The installation of Windows 7 starts.

During installation, the computer may restart, and the process will continue after that. When the installation is completed, the system will boot the last installed system and configure the first launch of Windows 7, check the performance of the video adapter.

After that, a window will appear in which you must specify the Username and Name of your computer.

In the next window, you must enter the product key, or uncheck the automatic registration on the Internet. Click next. The system then prompts you to automatically protect your computer and Windows 7 using the update settings. Generally, it is recommended that you select "Use Recommended Settings."

Next, set the time and date on the computer. After which there will be a preparation of the desktop and the final loading of Windows 7. Now you just need to install the necessary drivers and programs. Installation is complete and the computer is ready to use.

Nowadays, the use of disks is no longer popular, since many PCs and laptops are available even without a drive. For this reason, the question of how to make a bootable USB flash drive Windows 7 (UltraISO or another program will be used - you decide), as relevant as ever. Let's figure out what you need to have to create it and why you might need a similar bootable flash drive.

Possible and problems

Using an operating system such as Windows can be accompanied by various unforeseen problems and malfunctions. The OS often starts to work with serious failures, and sometimes even stops loading. It is impossible to insure yourself against such a thing, as well as to predict a similar state of affairs.

It happens that problems with the operating system are fixed by the usual system recovery function. To do this, just run it, unless, of course, you did save control points, and this system was started. If there is no way to start recovery, then Windows 7 will be able to save the situation. Of course, you can run from a disk with Windows, but a flash drive is more convenient and mobile. Moreover, in netbooks, for example, there is no drive.

Reinstalling the system - solution to the problem

There are often cases when a serious problem can be fixed only by reinstalling your OS (the image of the bootable USB flash drive Windows 7 is also suitable for this) if you did not have the Windows and data backup function turned on. A disk or flash drive with an image can be used for recovery, and for reinstallation, and for installing the system again.

Flash Drive Benefits

Most often, of course, the distribution kit with the operating system is written to a regular DVD-ROM. But, you see, now this is no longer relevant. Yes, and storing the OS image on such a disk is quite difficult due to the fact that it can easily be damaged by any mechanical impact. Just one small scratch can lead to the fact that the disk will not be recoverable, which means that your system as well. The bootable USB flash drive Windows 7 (ISO image on it) will be the way out of this situation. Installing the Windows system from a USB flash drive is no different from the usual process of installing an OS from a disk.

A USB drive with an OS image is better protected from all kinds of damage than a DVD. In addition, the flash drive is smaller in size, it moves easily without any problems and damage.

Main question

Well, and, of course, the main question is how to make a bootable USB flash drive Windows 7. UltraISO is one of the programs that will help you quickly and easily create an image of any disk. Besides her, there are also other applications for these purposes. But we will talk, as you already understood, about the UltraISO program.

Tricks of the program

This program is paid, but nevertheless has some trial free period of application. You can use the free version of UltraISO, but with one limitation - the file size of your image should not exceed 300 MB. Yes, this is such a tricky program. The bootable USB flash drive Windows 7, no doubt, will not fit into these megabytes. So the solution will be portable versions of UltraISO.

Rules for creating an image for a flash drive in UltraISO

So, we come to the main issue of this article. To how to create a USB bootable USB flash drive Windows 7 using UltraISO. By the way, in a similar way you can write on it the image of the now popular Windows 8.

To create a bootable flash drive in this program, you need to start it with administrator rights. After that, click "Open" at the top of the panel of the UltraISO program window. Next, in the explorer window that opens, you need to select the image of the Windows operating system for its further recording on a flash media.

In the window called “Open ISO-file” you should select the image of your OS and click on the “Open” button. If you are interested in how to make a bootable USB flash drive Windows 7, UltraISO will give you the opportunity to choose the image of the Windows 7 OS, as well as any other: Vista, XP, Eight. Further, in the program window, on the right side, an image of the necessary OS appears. Now connect your USB flash drive to the PC via the USB connector, if you have not already done so.

Features flash drive and its formatting

It is important to note that the flash drive for recording the image of the popular OS “Windows 7” or “Eight” must have a memory capacity of at least 4 GB, and also be formatted in the FAT32 file system. So that you can also use UtraISO right before you start recording the image.

note

Remember that if there is any data on the flash drive that you need and you do not want to lose it permanently, then copy it somewhere before formatting. After all, this procedure will delete all data from it.

Next steps to create

After that, in the program window, click on the "Self-loading" button, and then select the item in the context menu that offers to record the hard image. Then, after the window with the name “Burn disc image” appears, you must make sure that the correct disc is used to create a bootable flash card with the operating system. You must be sure that the flash drive is located on the correct letter of the alphabet.

Next, in the "Recording Method" section, click "USB-HDD +", and then go to formatting the drive or directly recording the image of the Windows 7 operating system. If the flash drive was formatted in advance, before recording the image, then you just click "Burn." If in advance you first click on "Format".

Formatting Process in UltraISO

So, let's take a look at the steps for in this program. In the "Formatting" window, select the FAT32 file system, and then click "Start." Next in the warning window, click OK. Formatting, as already mentioned, destroys all the data on the flash drive.

After completing this process, a window will appear in which you will be informed about the successful completion of the operation. Click OK again and close the formatting window.

The next step is to go to the Write Disk Image tab and click “Burn” to start creating a flash drive with an image. You will see a “Hint” window that warns that all data from the card will be deleted. Click "Yes." Now the process of recording OSes has begun. The recording speed of a USB flash drive with an image directly depends on the capabilities of your PC. After a while, the image will be recorded, which you will learn about from the Write Disk Image tab, where a notification appears that the recording has been completed. Well, here you have learned how to make a bootable USB flash drive Windows 7. UltraISO can be closed, she has already completed her job.

Finishing touches

After all of the above and done, you need to open the "Explorer" and make sure that the image of the Windows operating system is actually recorded on the drive. If you open the USB flash drive, you will see the image of the system there. As mentioned earlier, the process of creating an image of another OS version is no different from this. In order to install the OS, in BIOS it will be necessary to enable the priority of loading the OS from a USB drive.

Now you are not afraid of any glitches and malfunctions, because you will always have a working bootable USB flash drive with a system for restoring or reinstalling Windows, which will allow you not to waste time looking for a new image in case of any problems. The latter fact is very important in our dynamic time, when every second counts. In addition, such a solution will be relevant for those who earn money on installing and reinstalling operating systems. Agree, because a USB flash drive is much more convenient to carry with you, and there are USB outputs in every PC.

Recently, the method of recording images on a Flash drive has become increasingly relevant. This was influenced by the fact that the speed of the drives is greater than that of the optical disk, i.e. and Windows you install faster. In this article, we will clearly and correctly show how to write an image to a flash drive via UltraISO, highlighting the main points, and here you can proceed to download this software if you have not installed it yet. In some new computers, especially from the category of compact ones, the drive is no longer included in the package, so having an image on a USB flash drive is already a necessity.

Do not forget to compare the amount of free space on the Flash drive with the size of the image so that there are no problems and you do not have to be distracted and spend time cleaning. But how much space is needed to a minimum? You need to build on the size of the image. For example, before burning a Windows 7 image to a USB flash drive through Ultraisoneed to have order 2.5 GB of available space . For other versions - XP, Vista, 8 / 8.1 - this number can vary, respectively, in a larger, and sometimes in a smaller direction. From here - in order for you to normally record, at least you need to have a flash drive 4 GB, and whether it is an ordinary flash drive or a 2 TB portable disk, there is not much difference. In addition to the program and the drive (and a little attention with the ability to follow the instructions), you will not need anything else. Anyway, the operation of how to write Windows to a USB flash drive through Ultraiso, satisfied is simple and does not take much effort of the user, and also does not create problems.

But imagine that until recently, no one at all implied that the PC industry would step forward so far. When Bill Gates showed off a 5 MB floppy disk, saying that he would put all the information he needed on it, did he think what PC technologies would be in a few years?

Would you now have 5 MB? Imagine what work was done so that, for example, you couldn’t take a steam bath, how to create a bootable USB flash drive Windows 7 UltraISO. A special contribution here is not only engineering - teams of programmers (and how can one without them) also know their work, and in the aggregate progress is being made. So ... Now let's go back, the next link contains a software distribution Ultraiso. Download if you do not have it. We pass and do not be shy!

To write to the program, first of all, open the image:

After that, you will see a dialog box with the sample you downloaded. A little confused? Nothing wrong! Move on!

Choose Self loading . Next, the item on recording the image of the hard disk, see the screen. Immediately inform you that before the process of how to burn the image of Windows XP to a USB flash drive through Ultraiso, you only need to format and do no unnecessary actions, except for the specified ones. The point here is the same as for Win7 / 8.

It remains to choose a device. Set recording method USB HDD +. Paragraph Hide boot partition - there should be no ticks, we do not need to hide the boot partition. It remains to press Write down :

Information for using discs! Although they are outdated in several ways, the program supports recording them. The essence of the action, how to write through Ultraiso the disk image of Windows 7/8, etc., remains fundamentally the same as with the Flash-drive, you only need to select the disc recording, boot, in principle, which does not need, because The drive is considered a priority. But given the progress it will not be long!

After all, you yourself see how fast their need disappears with the advent of more convenient and efficient devices.

Tell us if it happened with Ultraiso make a record. How fast was the creation Ultraiso Windows 7 bootable flash drive? It will be useful to other visitors; Of course, you must also consider the characteristics of the PC and what kind of drive you have. Of course, there is nothing complicated here, but a PC can do strange things with the OS sometimes, so ask how to make a Windows 7 bootable flash drive using UltraISO, helping yourself and other users. Describe the difficulty - we will try to help you. Write comments through social networks below! Thank!

Recently, more and more questions arise about installing Windows from a flash drive. This is partly due to the growth of owners of netbooks and ultrabooks that are not equipped with DVD drives. Almost all the difficulty lies in creating a bootable flash drive. Therefore, this article will focus only on how to create a bootable USB flash drive. The image for the bootable flash drive can be any: Windows XP, Windows 7, Ubuntu and any other image that you can create yourself.

Creating a bootable windows 7 flash drive

I will show how to make a bootable USB flash drive using the Windows7 distribution example.

This will require:
UltraISO program (you need to download and install - use Yandex / google search)
- an empty flash drive with a volume of at least 4gb
-required disk image (for example, a file with the * .iso extension).

To get started, prepare your flash drive if it is not empty. Transfer the necessary data and format it (you can also format it later - in the program itself).

Run the program (as administrator) UltraISO and open the necessary image file “ File -\u003e Open”.

Insert the USB flash drive into the USB connector if it has not yet been connected. Select “ Self-loading -\u003e Burn Hard Disk Image”.

Now select your USB flash drive in the Disk Drive line in this window. The image file already contains the path to the image you selected / opened. A USB flash drive can be formatted by clicking on the “Format” button, if this has not been done before. Click the "Record" button.

An information message appears stating that the data on your flash drive will be lost. Click "Yes." If the message “ You must have administrator rights to perform the operation", You will need to run the application as administrator (Right-click on the shortcut or application UltraISO -\u003e Run as administrator).

In case of a successful start, the process of recording the bootable Windows USB flash drive should begin. Wait for the recording to finish. Creating a bootable flash drive is completed. Now you can install Windows from a USB flash drive, similar to installing from a DVD.

One of the most popular programs for burning discs or their images is UltraISO. If you know how to use UltraISO, you can easily convert CD / DVDdisks, as well as edit them, change the content, emulate the operation of disks and create bootable flash drives. The UltraISO program works with disk images in .iso format, and also supports images created in programs such as Nero or Alcohol 120%.

General characteristics of the UltraISO program

Before using UltraISO, you need to download and install it on your computer. You can do this, for example, here at this link. After you start the program, you will see in front of it its main window, which consists of four parts.

At the top left is a section containing information about the disk image, at the top right is a list of files in this folder. At the bottom left you see the directory of HDD and CD / DVD drives of your computer or laptop, the bottom right describes the folders that are located here.

On the toolbar of the program you see the following buttons: create a new image, open the image, compress the ISO image, mount it in a virtual drive (if installed, for example Alcohol 120), save the image and others.

With the UltraISO program, it becomes possible:

recording and emulation of CDs of any type;
automatic compression of the file structure of the image to save space;
creation of boot floppy disks, disks, flash drives with boot sectors of OS DOS, Windows NT, SysLinux, but not more than 2 GB;
support for a huge number of CD and DVD image formats, among them .ISO, .NRG, .MDS, .VCD and many others;
convert any known image type to ISO format
full control and management of the structure of files and directories within the ISO-image;
multilevel support for ISO standard;
support for creating bootable USB with USB-ZIP / USB-HDD modes;
interaction with no less popular software in the field of working with images of Alcohol 120% and DAEMON Tools.

How to use UltraISO to create a bootable flash drive

To create such a flash drive, first of all, you need to download an image of a multi-boot disk. After that, you insert the USB flash drive into your computer and launch UltraISO.

Open the program and find the image of the downloaded disk in it.

Open this image and get ready to write it to a USB flash drive. To do this, select the "Self-loading" section, and in the drop-down menu - "Burn hard disk image".

This window will appear in front of you. Check again on which flash drive the recording will be performed. On the button “Recording Method” there should be such an inscription.

If everything is correct, feel free to click the "Write" button.

Wait for the recording to end. Your flash drive is ready. When you want to download a computer from it, you just need to insert a USB flash drive, go into the BIOS and select "Download from USB-HDD".

How to use UltraISO to burn a disc

Run the program and place the files that you would like to write to the disc in the upper right square.

Pay attention to the field called "Total Size". It displays the total size of the files prepared for recording. It is important to pay attention to the fact that this volume does not exceed the volume of the disk on which you plan to write them. If everything is in order, click the icon with a burning disc - “Burn disc image”.

Click “Record” and wait until the recording is completed.

How to use UltraISO to create a disk image

A disk image is an informal term for the name of a file containing the complete structure of a system of files and data located on any disk or on a flash drive. That is, a disk image is the data that is, for example, on a CD / DVD-ROM that you hold in your hands. Such a disc image can be recorded in many different formats, but the most common are ISO, NRG, IMG, MDS / MDF, CUE, BIN, CCD. At the same time, the ISO format is almost universal; almost all other programs support it. Disk images are needed for backing up data - for example, the hard disk image of your computer - as well as for distributing and sharing all kinds of software.

To burn a disc image using UltraISO. Run it and add the files you need in the upper right window.

After that, go to the main menu and open the “File” section. In the drop-down menu, select "Save As."

A new window will open before you, in which you need to choose the format of the disk image and the folder in which you want to save it.

Once you do this, the download process will begin. And you will be able to subsequently find the disk image in the folder you specified.

If you want to burn a disc image from your existing CD. You need to do a little different. Insert the disk you want to create an image into the drive, then run the UltraISO program. Click on the disk icon - “Create Image”.

This window will appear in front of you.

Select the drive in which you have installed the desired drive, specify the folder where you want to save it, and click the "Make" button.

After the recording process is completed, the disk image you need will be located in the folder you specified.

Often, installing the Windows operating system from a USB flash drive is the only possible solution for device owners (netbooks, nettops and others), where there is no drive, and external USB drives, although they are most widely used in the consumer electronics market, are still not all . In addition, this method is largely justified and has several advantages (compactness, reliable data storage, high read speed) even in comparison with the traditional installation method with a CD / DVD drive.

So, in order to install Windows on a nettop or laptop (netbook) in the absence of a drive, or if you just want to have a distribution kit with a particular release of the operating system always at hand, you will need to write a bootable USB flash drive. One of the simplest, and most importantly working options is to record a bootable USB stick using UltraISO.

Despite the fact that the program belongs to the category of shareware, a free (trial) version of UltraISO (Russian version) is quite suitable for creating a bootable USB flash drive with the operating system. You can download the program.

Further, as an example, consider the process of creating a bootable USB flash drive for 64-bit Windows 8.1. Please note that the method described here is only suitable for the operating systems Windows 7 and Windows 8, for Windows XP this process is slightly different.

Download and run the program, such a window will appear, select here "Trial period ...".

The main program window will open, select from the menu: File → Open,

after which we find the image file with the extension .iso (or it may be different: IMG, MDF, NRG, etc.) in Windows Explorer (it is assumed that we already have a virtual image of the operating system on the hard disk of the computer) and click " Open".

At the next stage, select the menu item "Self-loading" → "Burn the image of the Hard disk ..."

This window will appear (if you have not inserted a USB flash drive, now is the time to do it).

Here you need to pay attention to the item "Recording method", UltraISO developers recommend choosing USB-HDD +. Here it’s worth explaining that the recording technique offered by the program at this step, namely: USB-HDD, USB-ZIP, USB-HDD +, USB-ZIP +, USB-HDD + v2, USB-ZIP + v 2 - these are the emulation modes of the corresponding devices. For example, the main difference between the USB-HDD method and USB-HDD + is that when using the advanced mode (USB-HDD +), the bootable USB flash drive is more likely to be compatible with the BIOS of a computer (laptop), etc., rather than when using a basic USB-HDD. In turn, USB-HDD + v2 will ensure the compatibility of your bootable flash drive with almost any, even very specific BIOS, so we recommend that you use it right away.

Also note that when using UltraISO there is no need to format the USB flash drive in advance, the program will do everything by itself, the only thing is that before you insert the USB flash drive and start recording, make sure that there is no information important to you on it. However, after you click “Record”, the program will warn you about this with this message.

We are waiting for the end of the recording process, upon its completion we get a universal bootable USB flash drive with which we can easily install the Windows operating system (in our case, Windows 8.1) on any computer, laptop, nettop, etc.

Directly, the process of installing the operating system from a USB flash drive is no different from that of a drive, however, in order for everything to work, you must correctly set the priority of loading devices in the BIOS of your computer.

Apparently, a lot of users have often heard about such a unique program like UltraISO. Of course, everyone who uses disk images in their work knows about this software product firsthand. However, the application features are much more than it might seem at first glance. So it is worthwhile to dwell on how to use UltraISO.

What is UltraISO?

Initially, UltraISO was designed as a tool for working with disk images. In this case, either optical drives of the CD / DVD type could be used, or images of hard disks with a size of not more than 50 GB were created. Now the technologies used in the UltraISO program have stepped far forward, and the application itself has become a universal solution for many computer tasks.

Program features

If we talk about how to use the UltraISO program, first we need to say a few words about its main features and functionality.

In addition to the fact that the application supports about 30 of the most common image formats that are compatible with almost all known programs of this type, the UltraISO package allows you to write data to a disk, extract it from images, create images of removable USB drives and bootable flash drives, and can also easily emulate optical drives, creating virtual ones, which is often used to run computer games that require the presence of the original disk in the drive.

Areas of use

In the question of how to use UltraISO, you need to pay attention to where this program can be used and what tasks it can solve. In addition to what has been described above, it can be noted that the application is an all-in-one package.

A key function, as already mentioned, is working with images. Moreover, the application is intended not only for creating images or extracting data. The program is able to edit such images. It can be, say, adding, deleting or creating directories inside the image itself, not to mention the possibility of optimizing the entire structure of the image to save space.

Speaking about the creation of bootable media, we can note the fact that the program is even able to extract the so-called boot boot sectors of a hard drive or floppy disk (floppy disks, however, have not been used for a long time).

Image creation and data mining

Now, in the question of how to use UltraISO, it is necessary to consider the main purpose of the program, namely working with images.

First of all, it is necessary to clearly distinguish between the scope of application, whether it will be written to disk or an image is created that is saved on the computer’s hard drive. It seems to be a small difference, but the operations performed are completely different.

To burn a disc, you just need to run the program and add the necessary files using the main menu commands or the usual drag and drop.

As you can see, in the upper right corner there is a special window in which the size of the added data is displayed. Here you will have to ensure that the amount of information added does not exceed the size of the disk used for recording. After adding files and folders, you need to use the button (or menu command) “Burn CD image”. In the new window ("Image Recording"), you can select the desired burner (if there are several), the speed and method of recording, and then click the "Record" button.

On the question of how to use UltraISO, the process of creating an image from several files without burning to disk is of no small importance. As in the previous case, first you need to add files to the program window, but then use the “Save As ...” command in the “File” menu and select the folder where the created image will be saved.

When creating an optical media image, the “Create CD image” button (command) is used, after which the optical drive into which the disc is inserted is selected in the new window (“create CD / DVD image”), the location of the future image and its format are indicated. After that, it remains only to click the "Make" button.

To extract data from an image file, the easiest way is to use the F4 button (“Extract to ...” command) followed by the location where the files and folders will be saved.

UltraISO: how to use. Flash drive

First you need to create an image of the operating system, and then save it to your hard drive. Now, in the File menu, use the Open command (Ctrl + O) and specify the path to the image file. Next, in the "Self-loading" menu, you need to select the command "Burn hard disk image" and specify the desired USB-drive. The program will request that all information on the flash drive be deleted.

Confirm cleaning. The recording process will start automatically and will take several minutes, after which a message will appear indicating that the process has completed successfully.

After that, it will be possible to use a flash drive to restore the system if, for any reason, a failure occurs. Agree, a much more effective way than reinstalling Windows. In addition, information will be stored more reliably, unlike optical disks, which are subject to mechanical damage.

How to use UltraISO: games

Gamers know that sometimes a disk is required to run games. And if he is not? Speaking about how to use UltraISO for games that require the presence of a disc directly in the game process, the procedure here is not much different from everything that was described above. The simplest method is to use the "Tools" menu, in which the "Mount Virtual Drive ..." command is selected, after which the image of the original game created in advance is selected. After that, just click the "Mount" button. Next, a window to launch or install the game will appear.

To create an image, you can also integrate. To do this, use the “Options” / “Settings” / “Integration” sequence, where a check mark is put in the desired format (for example, .iso) and the “OK” button is pressed. Now, after double-clicking on the image, either it is mounted independently, or it will open in the window with the game launch folder.

Conclusion

As you can see, the capabilities of the UltraISO program are quite wide, as well as the scope. The only thing that upsets a little is that the full-featured version of the application is paid. Lightweight free versions have significant limitations. Nevertheless, for most users, these features will suffice. It remains to add that the question of how to use UltraISO does not always mean writing data to disk. This makes the program universal for all use cases.

Problems