Apple smartphones are known for their wide range of features. Technologically sophisticated devices are in great demand all over the world due to their functionality. iPhone supports multiple notification modes. This is not only a sound and vibration alert. You can also notice the alert using a light signal. This article will look at ways to turn on the flash when making a call on your iPhone.

The flash will be convenient to use:

• in meetings when you need to mute your device;
• when using a case that covers the phone screen;
• in the dark, if the phone is on silent mode.

This set of notifications was not created by chance. They allow you to use them in various situations. For the first time, the light type of notification was used on 4th generation devices. The flagship models were the iPhone 4 and 4S. In the iOS system settings, users could activate an LED alert, which would start signaling when a call or SMS message was received. Activating the function is easy. All settings were made from the system menu.

With each new version of the mobile operating system, options have been added that are used not only to display incoming calls, but also SMS messages.

Flash control for incoming calls and SMS is carried out through the “Universal Access” section. It is located in the gadget's system settings.

There is a separate item in the options menu – “Hearing”.

It activates a light signal, and also adjusts subtitles and the volume balance between sound channels when a headset is connected.

The flash was designed for people with hearing problems. The LED lamp located on the back of the phone begins to pulsate brightly when there is an incoming call or SMS, attracting attention.

Ways to turn on the flash when calling and SMS

All settings are located in the phone system menu. To activate the option, you will need to perform the following steps:

1. Go to the “Settings” section in the main menu.

1. Select "Basic".

1. Go to the “Universal Access” tab.

1. In the “Hearing” section, activate the “LED flash for warning” function.

After this, the function will be active. You should immediately check whether it works. To do this, just call your number or send a message.

If the mode is active and there is no notification light, you will need to restart your iPhone. To do this, just press and hold the Power button. It is located on the top panel of the smartphone. After holding it for a few seconds, the screen will go dark and a lever will appear that says “Turn Off.”

By swiping it to the right, the phone will be turned off. After this, you should press the Power key again and wait until the iPhone completely boots up.

How to enable silent mode

Starting from version 9 of the iOS mobile operating system, there is an additional setting for the light notification option when making a call on the iPhone. With its help, you can select additional LED notification parameters. You can enable a mode in which the notification will be made by flash with the sound turned off.

To do this you need to follow these steps:

1. Click on the “Settings” icon in the main menu of the iPhone.

1. Select the “Basic” tab.

1. Click on the “Universal Access” item.

1. Go to the “Hearing” section and click on the “Flash Alerts” tab.

1. By activating the mode (switching it to the “On” position), you will see a new window. In it, to activate the function, you need to move the button to the right. It is located opposite the inscription “Flash in silent mode”.

Now, when the user mutes the iPhone, the LED notification will continue to work. This type of notification becomes active only in silent mode. If the ringer switch on the smartphone is in the active position, there will be no blinking from the lamp on the back side when making a call.

Once the light alert is activated, it will work when the device is locked. If the iPhone is active, the LED lamp on the back panel will not light up when a notification or call arrives.

Why doesn't the flash work?

Users, after rebooting the device, may find that the warning light has become inactive. This may be due to an internal system glitch in the software. Such errors occur for reasons beyond the control of the iPhone owner. Access to system resources is limited. Users cannot edit operating system files and settings.

To fix this, just go to the device settings. You should check if the flash is on when making a call. To do this, in the “Basic” tab, you need to go to “Universal Access”. If the inscription next to the inscription “LED flash for warnings” or “Flash for warnings” is not active, it must be turned on. To do this, move the lever to the right.

The notification light may not work when you reset your iPhone to factory settings. With this action, all settings made by the user previously in the smartphone settings will be reset. To restore them, you should make backup copies to iCloud or iTunes.

Another common reason for the warning light failure may be technical problems. If the device is dropped, the contacts powering the LED lamp may be damaged. To verify that this is the cause, follow these steps:

1. On the unlocked main screen, swipe up from the bottom frame to activate the hidden menu.

1. At the bottom left of the new screen there will be an image of a lantern. By clicking on the icon, the LED backlight is activated.

If the lamp does not work after turning on the flashlight, then there is technical damage to the smartphone. To fix them, you should go to a service center. It is not recommended to disassemble the iPhone on your own to repair damage. This can lead to complete failure of the phone.

How to turn off flashing when calling

To turn off the light alert, the user must do the following:

1. Go to the “Settings” section by clicking on the icon in the main menu.

1. In the “Hearing” section, move the lever to the left. It is located opposite the inscription “LED flash for warning”.

After this, the function will be deactivated.

Results

The considered operations to activate the light signal are performed in several steps. Apple has introduced LED notification settings for all smartphone models, starting from version 4 and higher. Users can enable a general mode in which the flash will work when there is an incoming call and SMS.

Additionally, with the release of version 8 of the iOS mobile operating system, new functions have become available that allow you to activate the LED glow only when you turn off the sound on your smartphone. If you still can’t turn on the flash or have questions after reading the instructions, you can leave comments under the article. Specialists will give a detailed answer and help solve the problem with your smartphone.

Video instruction

A video was made especially for readers with a detailed analysis of each method of activating a function on a device.

Such blinking can be quite useful in life, because sometimes we listen to music loudly and in many other situations. Let's figure out how you can enable and disable this feature.

Flash flash on call when iPhone rings

But first, I’d like to talk a little about this function and how exactly it will work. After all, this is quite important information before using any function.

We all know that Apple takes people with disabilities quite seriously. Therefore, the iPhone has a lot of functions that help in working with this device.

One of them is a function that allows you to turn on the flash. It starts flashing when there is an incoming call or any notification.


There is also an option to make it inactive when you put your iPhone on silent mode. Everything is thought out quite seriously.

Today, ordinary people also use it. After all, you can come up with quite a lot of situations when this function is very useful.

For example, if you left your phone at the end of the room, you will be able to respond to the call faster. Also when listening to music at very high volume or with headphones on another device.

How to make/remove blinking on iPhone when making a call?

Like most features on the iPhone, you can turn this one on or off fairly quickly. With every iOS, customizing your smartphone becomes easier.

To activate this feature, follow these steps:

By taking these simple steps, you can get a great feature that will help you make your life a little easier. But do not forget also the fact that it is better not to use it at important meetings or events.

conclusions

Now you are the happy owner of an iPhone, which, when there is an incoming call, can still play a flashing sound, in addition to the usual melody.

It is very easy to enable this feature, which will allow you to disable it at any time. Now you will use the flash not only as a flashlight or for taking photos, but also for notifications and incoming calls.

Apple is famous for its consideration for users with disabilities. There is a whole section in the settings called “ Universal access", where there are functions that help adapt the process of using the gadget to the needs of such people. One such function is LED flash when calling, designed to notify users with hearing impairments about incoming calls or SMS messages.

It's absolutely fair that LED flash on iPhone found a lot of fans among ordinary owners of Apple devices. It’s difficult to hear the built-in polyphonic melody or feel the vibration while in a crowded place, but you definitely won’t miss the flash, which blinks dazzlingly brightly when making a call. How to activate this useful feature on iPhone?

How to turn on the flash on iPhone when they call?

You can set the flash when calling on iPhones of any modification older than 4. Holders iPhone 3GS This function is not available by default due to the lack of the required LED. People who needed light alerts due to health problems could purchase a proprietary flash accessory for their third iPhone called iFlash. Nowadays, finding such an accessory on sale is as difficult as finding it yourself. iPhone 3GS.

Setting up a flash when making a call on an iPhone 4 or any later modification, on the contrary, is very simple - this is done in 3 steps:

Step 1. Go to " Settings" and proceed to the section " Basic».

Step 2. Find the subsection " Universal access“—that’s what you need.

Step 3. Scroll down to the block " Hearing", find the toggle switch " LED flash for warnings" and switch it to the active position.

Now the iPhone will notify you with flickering not only about an incoming call, but also about an incoming SMS message. In addition, the flash will sound simultaneously with the alarm melody.

The iPhone only blinks when in lock mode. If the device is unlocked, most likely the owner is using it and will not miss the call anyway.

Conclusion

Many users of Apple gadgets, unfortunately, refuse the LED flash when making a call, despite the fact that they consider this function extremely useful. They are guided by considerations of saving charge, believing that an activated LED drains the battery many times faster. In fact, this is a misconception: of course, LED flash uses power, but not as much as, say, a 3G connection or Wi-F i. Therefore, a user who wants to achieve long battery life on an iPhone should use other methods that are more effective than not using the flash when making a call.

Because Since the iPhone does not have a separate notification indicator, as is implemented by other smartphone manufacturers, Apple developers suggested using the built-in LED flash for these purposes.

Starting from the 4th generation, the flash on a smartphone can be used not only in flashlight mode or photo/video shooting. It also serves as an additional alert signal for incoming calls, SMS messages, etc.

It is worth noting that enabling this option will result in increased battery drain. But if you use the flash instead of vibration and melody, and not all together, then the battery, on the contrary, will last longer.

Initially, this option was planned to help people with hearing impairment. But LED notifications can also come in handy if you're in a noisy room and your phone is on the table. In this case, vibration will not help, but you will easily notice the blinking flash on your iPhone.

Settings to turn on flashing flash on iPhone

To set the flash, follow the steps:

1 Go to the “Settings” menu.

2 Next “Basic” item.

3 Next “Universal Access” item.

4 Next “Flash warnings” item.

5 Activate the slider.

After turning on the flash, be sure to place your iPhone face down, otherwise you won't see anything.

Video instruction

LED flash when iPhone rings is used for the first time on 4th generation devices. Previous models could not boast of it. An accessory such as iFlash can be purchased separately if desired. Nowadays, all models of smart phones have an LED flash, which provides a sufficient amount of light when taking pictures.

How to turn on the flash for an incoming iPhone call?

To do this, you just need to follow three simple steps:

1. Launch the Settings application, and then scroll through the list to go to the General section.
2. Go to the “Universal Access” tab.
3. Go to the “Hearing” section and here set “LED flash for alerts”.

Increase

Activation of LED flash for call alert is completed.

After these steps, the LED flash will give a notification during a call: in addition to the melody, the flashlight will start blinking. This addition will be especially useful for people with poor hearing.

This is a simple function, but at the same time it is quite well developed. The flash will also respond to incoming calls and will be activated when the alarm goes off. It's worth noting that the flash flickers when the phone is set to lock mode. But in the normal state there will be no warning light. As for the indication of a missed SMS message, it is only possible if the mention of an unread message is configured.

Please note that during a call, the flash will additionally consume battery power. So, after activating this feature, you shouldn’t be surprised if the iPhone will discharge much faster. Therefore, to save battery, it is best not to use it.

WiFi