If there is insufficient memory for all the operations the computer tries to perform, Windows and programs may stop responding (or stop working). To prevent data loss, Windows will report insufficient RAM. You can also learn to recognize low memory situations yourself and take steps to prevent the problem.
Signs of low memory
Signs of low memory include severe performance degradation, low or low memory alerts, and display problems. For example, if the computer does not have enough memory, then when you try to open the menu in the program, it may be delayed in response or stop responding altogether. And even if the menu opens, its items may not appear, and the selected item may not respond. In addition, after selecting an item, the menu itself may disappear, and an empty area appears instead of the contents of the working file or document.
Causes of lack of memory
There are two types of memory in a computer: RAM and virtual memory. All programs use RAM, but when a program that is running runs out of RAM, Windows temporarily places data that is normally stored in RAM into a file on your hard drive called a paging file. The amount of data that is temporarily stored in the paging file is also called virtual memory. Using virtual memory (in other words, moving data to and from the paging file) frees up enough RAM for programs to run properly.
Out of memory problems occur when there is insufficient RAM and insufficient virtual memory. A similar situation can be observed if the computer is running more programs than is supported by the installed RAM. In addition, problems can also arise if the program does not free memory that it no longer needs. This situation is called memory overuse or memory leak.
Ways to Prevent Out of Memory Problems
Running fewer applications at the same time can prevent out of memory and data loss issues. It is recommended that you pay attention to exactly which applications are experiencing low memory situations and do not run them at the same time.
However, limiting the number of applications running simultaneously is sometimes unacceptable from a practical point of view. Low memory symptoms may indicate that your computer needs more RAM to run the programs you are using. The following are recommended ways to resolve or prevent out of memory problems.
To determine which program is using the most memory, follow these steps
- Open the task manager. To do this, right-click the taskbar and select Task Manager.
- Open the tab Processes
- To sort programs by memory used, click Memory(Private working set)
You can also use Event Viewer to view program errors and information on how to fix them.
- Open the section " View events". To do this, click Start - Control Panel - Administrative Tools, then double-click View events. When prompted for an administrator password or confirmation, enter the password or provide confirmation.
- In the left pane, select Applications and Services Logs to view errors. Double-click the problem to see a description of the problem. If there is a link to online help, then you can view the troubleshooting information.
If Windows detects possible memory problems on your computer, it displays a prompt to run the Memory Diagnostic Tool. There are two options for running the Memory Diagnostic Tool
Important: Save files and close all applications before choosing the first option... The Memory Diagnostic Tool will start automatically after Windows restarts. This tool may take a few minutes to complete the memory check on your computer. After the test is completed, Windows automatically restarts. If the diagnostic tool detects errors, you should contact your computer manufacturer for information on fixing these errors, because memory errors usually indicate problems with the memory chips in the computer or other hardware problems.
You can also start it manually. There are two ways to do this:
- Start - Control Panel - Administrative Tools - Windows Memory Checker
- Start - Run and Enter mdsched Click OK.
When you selected "Reboot and Test", after reboot, press F1 while launching the Memory Diagnostic Tool. For advanced users, additional diagnostic options are provided:
- Test suite
- simple
- standard
- extended
- Cache
- Default
- On or off
- Number of passes
Press F10 to run the test. It should be borne in mind that the more difficult the test, the longer it takes to check. After checking and loading the system, the Windows Memory Checker icon will appear in the tray.
View "Computer Problems and Stability Log":
Opening the Support Center Service -.
Click any event on the graph to view more details about it
Click to view only the problems that have occurred on the computer. This view does not include other computer events shown in the System Stability Monitor, such as software installation events. Please select Windows Memory Checker to view the verification report.
Some problems and solutions can only be viewed and fixed by the administrator. Log in with an administrator account to view these issues
Error " "Occurs when a WOT client does not have enough RAM to process data. Most often, this message appears on weak computers in which the system does not meet the minimum requirements of the World of Tanks.
The minimum amount of RAM to run World of Tanks is 1.5 Gb.
However, owners of powerful PCs are also not immune from a lack of memory in HERE. Questions often appear on the official forum: “ Why does he write that there is not enough RAM, although there is a lot of memory? What to do? "There is a solution. But first, a little theory to understand.
What RAM does
Random Access Memory(it is RAM or RAM) is the memory in which the computer stores data from games and programs running right now, including the operating system itself. The more machine code is executed while the application is running, the more RAM it needs.
The PC's processor takes the code from RAM and executes it. For example, when in World of Tanks you shoot at an enemy, the processor takes from memory the part of the code responsible for the shot and executes it. Thanks to thousands of lines of complex mathematical calculations, your projectile flies along a realistic trajectory and ricochets off the side.
If the RAM is too small, some of the WOT machine code will not fit in it. This causes a decrease in FPS and lag in the game, and can also lead to an error " Not enough memory. Please restart the game ».
How to see the amount of available memory on Windows
How to increase the amount of memory for World of Tanks
Increase the swap file
Paging file Is a Windows system file. It lies on the hard disk of the computer and stores data for which there is not enough space in the RAM. It complements RAM, but is not a complete replacement for it. The paging file contains mostly data from inactive and minimized programs. If the active application runs out of RAM, it will also work with the paging file.
Virtual memory Is the shared memory of RAM and FP. In order for World of Tanks to work normally, its volume needs to be increased.
The instruction is relevant for Windows 7/8 / 8.1 / 10
- RMB on the icon " My computer
» → « Properties
»
- We press ""
- In the "Performance" section, select " Options
"And go to the" Additionally
»
- In the "Virtual memory" subsection, click " Change
»
- Next, you need to select any virtual disk, except C: /... On disk C: / the operating system itself is installed, so constant interaction with the FP can slow down its work. Ideally on low-power devices on disk C: / there should be nothing but the OS.
- Uncheck the box " Automatically select paging file size ».
- We select the item " Specify size
"And indicate the volume in megabytes - no more than physical RAM.
For example, if your computer has 2 Gb of RAM, you can specify the size of 2048 mb for the paging file. - Then we press the button " Ask " and " OK "(In each window).
You may need to restart your computer for the changes to take effect.
You can also ask “ System selectable size ”, And Windows will automatically select the required volume, but this is ineffective. If the FP is too large, the WOT may receive an error “ Rating: 5/5 - 3 votes
Many players of the popular online game world of tanks are often faced with the problem of an error that says "Insufficient memory, restart the game world of tanks." To a greater extent, this applies to those who have a small amount of RAM (2-4 GB) installed on their computer or are simply disabled.
In this article, we will show you how to fix this error so that it does not appear again.
What causes the error "Not enough memory, restart the game world of tanks"?
As you can see from the text of the error, the problem is a lack of memory. It's about RAM. It also involves virtual memory, which is used by the operating system in the event of a shortage of RAM. Virtual memory is often referred to as a paging file.
World of tanks is a rather demanding game for the normal operation of which you need at least 4GB of RAM, or even more. then the swap file comes to the rescue. It works much slower than RAM, as it is located on the hard drive. But it's still better than nothing.
The error "Not enough memory, restart the game world of tanks" appears when this very virtual memory (paging file) becomes insufficient and the operating system notifies the user about this with this kind of error.
How do I fix the error?
There are two solutions.
The first is this. That is, buy a memory bar in order to increase its total volume on the computer. At least up to 6-8 GB. This option is expensive in terms of money, but it is correct. Since the speed of the RAM is very high compared to the paging file. This means that games and heavy programs will load faster.
RAM bar
The second option is not expensive. It also solves out of memory problem. You just need, or better, install it "System Choice".
They say that when there is not enough memory, restart the game world of tanks - a fairly decent number of users of the well-known game "World of Tanks" are faced with such a problem. Naturally, everyone who notices such a message on their PC has a very obvious question: what to do with it?
It is impossible to unequivocally answer this question, because the reasons can be completely different. But, as a rule, most often this problem is faced by users whose personal computer is equipped with a small amount of built-in RAM.
What to do when you see the inscription: "not enough memory, restart the game world of tanks"?
Most likely, the reason for this phenomenon is that your computer is very weak and has insufficient RAM resources, or they were somehow damaged. The most logical thing in this case is to contact a specialist, or visit the store yourself and purchase additional RAM cells.
If you are an ardent fan of the game and spend a good amount of your free time in it, then such a message serves as a beacon in order to completely update your computer's hardware resources.
Of course, not everyone will like this option, it takes time, knowledge and, most importantly, financial costs, for which not all users of the online game are ready.
To leave your budget alone, you can first try to fix this problem from the inside.
There are hopes for success here, especially if you notice such a message not during the first launch, but already during the game. To do this, you can download specialized programs via the Internet. There are a huge number of programs that help the user to free up space and optimize it.
If this does not help, then there is nothing left but to use the first option.
You can also try to increase the size of the paging files, for this:
Right-click on "My Computer";
We are looking for "Properties";
After: "Additional" or, in another way it can be called - "Additional parameters"
Next, the chain: "Performance", then click - "Parameters", then look for - "Advanced", then click - "Virtual memory", and finally - "Change";
We enter a new value. Naturally - more than has already been indicated. At the same time, the disk must have at least 10 gigabytes of free space on one of your disks.
"Ask".
If this does not help, then we are definitely returning to the first option.
Working with Android
