How to flash a Chinese iPhone?

Updating your smartphone software is necessary for it to work correctly. Let's look at how to flash a Chinese iPhone without contacting a specialist.

Before starting such an important process as flashing, you should prepare everything you need.

In addition to the device itself, you will need:

• laptop or PC with Internet access,
• connection cable,
• current firmware.

iTunes and the application located Snowbreeze can help you update the software.

Smartphone firmware

Before flashing the firmware, you need to make a copy of the system, contacts, media files and SMS messages. This will allow you to save important data and return to the old version if the device does not start after installing the new software. So here's what to do:

1. You must start the firmware by launching the previously downloaded Snowbreeze program. It will help modify the original file and adapt it to the needs of the Chinese device. To process the firmware file, drag it into the program window and enable Expert Mode, then check the Activate The iPhone (Hacktivate) item. You also need to set the “Enable Battery-Percentage” mode. To generate a modified file, you need to click on the “Build IPSW” button. After processing, the user will receive ready-made firmware for installation.
2. After this, you should connect the Chinese device to the PC and enable DFU mode on it. This can be done by holding down the Power and Home buttons.
3. Launch the Snowbreeze program, enable iREB ​​mode in it and click on the Start button. After launching iTunes again, click “Restore” while holding down the Shift key. Select the previously created firmware and proceed to install it.
4. Wait for the process to complete.

Now you know how to reflash a Chinese iPhone. You may also be interested in our other articles.

iPhone smartphones are rightfully considered one of the most popular in recent years. But not everyone can afford their cost. The contradiction between the high price and popularity took its toll, and no less popular Chinese analogues of iPhone copies appeared, outwardly no different from the original. As the demand for copies increases, so do the needs of users directly or indirectly related to these devices, including the ability to reflash Android on Chinese iPhone at home.

Despite the ideal appearance, the internal shell with functionality is weak and resembles the original only in the interface; the smartphone itself runs on the Android OS. All working elements of such analogues are of dubious origin. And software is no exception; in case of failure, the question of flashing and how to do it will arise.

How to reflash a Chinese iPhone yourself

You can learn more about iPhone copies in our reviews and customer reviews

	and review
	and review
	and review
	and review

To ensure a complete flashing of the smartphone, you will need the following several utilities:

1. Archive with system firmware files. Actually, this is the future OS for smartphones.
2. Flash Tool program. It is an interface with a set of functions for flashing.
3. GO Keyboard or another Russian-language keyboard for a smartphone.

Another undoubtedly best option for a budget purchase is. Read the full review and reviews from owners of the replica about their impressions and conclusions from purchasing a smartphone.

Is it possible to reflash a Chinese iPhone from a PC?

To start installing the firmware, you need to run the previously downloaded Flash Tool program (on behalf of the Administrator!) and specify the path to the text sketch file and click the “Open” button.

The next step is to hold down the “Home” button on your smartphone and, without releasing it, connect the device to the PC (laptop) using a USB cable; when finished, select “Downloads” in the Flash Tool. If the connection is successful, the program will display three lines: red, purple and yellow. The first line notifies that the “Home” button on the device can be released, and the last line indicates the successful process of installing system files on the smartphone.

The overall flashing speed depends on the quality of the Chinese phone's shell. When the process completes successfully, Flash Tool will open a notification dialog box. You can disconnect the phone and close the utility. You won't need a computer anymore.

How to reflash a Chinese iPhone and return the settings

Firmware alone is not enough and, for a fully working interface, you need to change the smartphone settings. It is impossible to return the user's settings to the firmware and will have to be configured again. You can turn on the device, but you will have to wait a little - the first turn on after flashing the firmware is always a long one. What immediately catches your eye is the Chinese characters. This is normal and you should not panic, because the manufacturer is Chinese. You just need to set the Russian language in the settings. There are several options to find a menu with language selection:

1. From memory if the menu is familiar. After flashing, the settings menu retains its architecture.
2. Via the Internet, looking at special forums or screenshots.
3. Focusing on the menu architecture of the original iPhone, which has a language change available in the “General” settings category.

In any case, the task is not fatal and changing the language is only a matter of time. And the last procedure, installing a Russian-language keyboard. Not every firmware build provides this utility for a smartphone. In the absence of one, the only option for installing a comfortable and functional keyboard is to purchase it on Google Play. To circumvent this nuance, it was necessary to download the keyboard to the computer in advance. Now the phone can be connected to the car again and a full keyboard can be installed.

This completes the setup procedure, all that remains is to use minor functionality (mode, volume, date and time) and the device is completely ready for use. How to reflash a Chinese iPhone - very simply and without complicated measures. The whole process required only a PC with Internet access, several utilities and a little more than one hour of free time.

iPhone is one of the most popular brands of phones, but it is also very expensive. Chinese copies of phones, of course, are not as productive, but they look impressive. But the Chinese firmware leaves much to be desired.

Step-by-step guide to flashing/reflashing Chinese iPhone 6s

1. First you need to find and download the original firmware for iPhone 6s. Fortunately, in the vastness of the firmware called flash tool This program must be installed on your computer.
2. After installation, run flash tool as administrator.
3. When the program opens, you need to select a function and select the firmware.
4. Then you need to take the phone directly and connect it to your PC.
5. After connecting the USB cable on your phone, you need to press and hold the home button.
6. After a red line appears in the flash tool, this will mean that the home button can be released.
7. A yellow line will appear, which will mean that the firmware is being downloaded. It should be taken into account that firmware is not a quick process and it takes time to download it to the phone.
8. When the download is complete, your phone will notify you that the firmware download was successful.
9. After the firmware is installed on your phone, you can disconnect the cable.

The first switching on will not happen very quickly, about 3-4 minutes. It depends on the parameters of your copy.

ATTENTION!

After the first boot, the phone will be in a random language, that is, Chinese. To reinstall the language, look at the tutorials on the Internet. Well, if you need maximum resemblance to the original, then go to the dialing menu and see this code *#8000#.

After entering this code, the phone will begin to reboot automatically. If nothing changes, then perform the operation several times.

Another method of flashing is more extreme, so we advise you to save a copy. If suddenly the firmware gets stuck, this will allow you to bring the necessary contacts, videos, and even the phone itself back to life.

So let's get started:

1. To get started, download the program snowbreez. This program will adapt regular firmware to Chinese.
2. First you need to run snowbreez.
3. After launch, drag our firmware into the program and turn it on Expert Mode.
4. After turning on this mode, you need to select the item Activate the iPhone.
5. In order for the program to generate the firmware we need, we need to click build IPSW.
6. After a short processing we will receive the finished firmware.
7. Next, connect the phone via a USB cable to the PC and press the home button.
8. Then go to the snowbreez program and select the mode iREB and press start.
9. After which you need to run itunes with the shift key held down.
10. Drag and drop the previously created firmware and proceed to its installation.

All you have to do is wait for it to complete and the firmware will be installed!

For iPhone 7 made in China, when flashing firmware via a computer, you need to use its latest version. An important nuance is that replicas from China are released on Android, not iOS. In addition to downloading the firmware, you will need to download another program designed for flashing Flash Tool firmware. Next, you need to unzip the folder with the firmware and installation program, and send it to some folder on your PC.

When first turned on, the startup is quite slow. Next, the language is installed on the phone instead of Chinese. To do this, you need to open “Basic” (as on the original iPhone), select a language by clicking on the button located at the top of the screen on the right.

The keyboard can also be changed, since it is originally Chinese. For example, GO Keyboard is suitable. You can use the Play Market for this.

You need to change the lock on the device screen so that it looks like on iOS:

1. Press “Phone” on the display and begin entering numbers. You will need to insert the code *#8000# - the phone will reboot;
2. Wait for several minutes;
3. Turn on the iPhone 7 replica, and if nothing has changed, perform this action again.

During boot, the Apple logo will appear on the display, not the Chinese company. The lock screen will be similar to the unique iOS lockscreen. After this Chinese production, the iPhone will look very similar to a real iPhone.

Flashing iPhone 6 firmware is an operation that is necessary for any device sooner or later. But not all owners of Apple gadgets know what it is. Of course, everyone has encountered system recovery and updating. But not everyone knows that these actions are called firmware.

In fact, there is nothing complicated about the firmware. There are several ways to carry out this procedure. And almost always the user wonders whether it is possible to do it himself. Absolutely yes. But if you don’t want to tinker, you can take the device to a service center. As a rule, in workshops, firmware is one of the standard services. But why spend money if you can do everything yourself and save money? How to restore or update an iPhone 6 - read our instructions.

Choose one of the flashing methods that suits you best and get started. If you do everything right, success is guaranteed. The only thing is that if errors appear during the operation, it is better to turn to professionals.

First, a little theory. Let us repeat once again that by firmware we mean either restoring or updating the system. The first is necessary to return the device to its original (factory) settings. The second is to install the “fresh” version of iOS.

Typically, flashing an iPhone is required in the following situations:

• When problems with the operating system began to appear.
• If the current version of iOS is not the newest, and a newer one has already been released.
• If necessary, completely erase all information from the gadget’s memory. This may be necessary when you plan to sell the phone to another owner.

Based on the essence of the recovery and update procedures, it becomes clear that they are completely different. During the first process, all data is deleted. In the second case, they are saved.

If we talk about firmware methods, the following are most often used:

• iTunes utility.
• Downloading iOS updates via Wi-Fi.

The first method will help the user in any situation. First, the “fresh” version of the operating system is downloaded to a laptop or PC, and after that it is transferred to the iPhone, and installation is done.

And when using Wi-Fi, everything is banal: a simple iOS update occurs by downloading the “fresh” version via the network.

What modes does the iPhone work in?

Mobile gadgets from Apple operate in the following modes:

• Normal.
• Recovery mode.
• Update mode.

The first mode is the normal state of the phone. Recovery (Recovery Mode) involves flashing via backup or iTunes to the latest version.

To enter the device into this mode you need:

• Connect your iPhone to your laptop or PC using a USB cable.
• Turn off your phone.
• Turn on the device again and do not release the power button until the screen starts working.

The mode will turn on, but in this case the OS will not load into the gadget, and all data will be transferred through the cable. This operation will restore all device settings.

In update mode (DFU), the screen may be black or white. When you connect your iPhone to a computer device, the latter will automatically detect it. A message will appear on the display that the iOS device has been detected by the system.

To enter your iPhone into DFU mode, you need to take the following steps:

• Connect the device to a laptop or PC using a USB cable.
• Press the Power and Home buttons (both at once).
• Release the first button while continuing to press the second.
• Wait for the gadget to enter DFU mode.

How to reflash iPhone 6 and iPhone 6S?

Let's move on to a detailed description of the firmware methods most common among iPhone owners. The main recovery and update methods were briefly mentioned above. Now let’s take a step-by-step look at what each of them means.

So, there are 2 main methods - through the iTunes utility and using Wi-Fi.

The first method is based on downloading software components to a laptop or PC. And then the data is transferred to the iPhone with subsequent installation. This method is suitable for devices with iOS version 4.3.5 and older. For operating systems version 5 and higher, the method using Wi-Fi is more often used.

How to flash iPhone 6 via iTunes

To restore a gadget using this utility, we will need:

• The latest version of iTunes installed on your PC.
• The firmware file that is on the device at the time of the operation. Although this is not necessary, it is highly advisable to save time later.

After preparation, you can begin the recovery operation itself. The sequence of actions should be as follows:

• Disable the iPhone search function (if it was activated).
• Connecting the device to the computer via a USB cable.
• Launch the iTunes utility (usually the program starts automatically when an iOS device is detected).
• Go to synchronization settings.
• Press and hold the Shift key while pressing the recovery button.

After the 5th step, the operation will begin. The iTunes program will download the “fresh” version of iOS. And after that, the utility will install it on your mobile device. The iPhone will be in Recovery Mode during the process. The phone's memory will return to its original state upon completion of the operation. All user information will be erased.

We perform firmware via Recovery Mode and DFU

When using these methods, everything happens almost the same as when working with the iTunes utility. Only, perhaps, here the process takes longer, since before it you first need to enter the phone into one of the named modes. In turn, to do this you need:

• Enter the device into Recovery Mode or DFU.
• Connect the device to a PC or laptop via a USB cable.
• Launch the iTunes utility, which will automatically detect the iPhone in recovery mode.
• Open the firmware file prepared in advance.
• Wait for the operation to complete.

How to update iPhone: methods

Updating the operating system on an iPhone is possible through the iTunes utility. You can also do this by downloading program components wirelessly via Wi-Fi.

The first method is similar to the restore operation. The second will allow the user to update iOS to the most current version. Using Wi-Fi is convenient because it is a wireless method that does not require connecting the gadget to a PC.

In order to update your Apple device via iTunes, you need to follow this algorithm:

• Connect your iPhone via a USB cable to your computer device.
• Open iTunes.
• Go to the device and click on the name of the desired gadget model.
• Enter the synchronization page by selecting the update operation.
• Confirm the operation by clicking on the appropriate button.

At the end of the operation, the latest operating system will be installed on the iPhone. At the same time, it is important that absolutely all settings and data of the device will be saved.

Update iPhone 6 over Wi-Fi

Since the advent and implementation of iOS version 5, users of Apple gadgets have the opportunity to update devices via Wi-Fi. Devices with such an operating system (and with versions higher than 5) have an iOS update section. Now it is possible to carry out the entire procedure directly through the device interface.

But the operation can be performed in this way only if there is a working Wi-Fi connection. Unfortunately, this is impossible to do through mobile networks - 2G or 3G.

The list of steps to update an iPhone via Wi-Fi includes only 2 steps:

1 The user must enter the basic settings of his device, and then select the option to update the software. 2 Select download and installation, accept all conditions proposed by the system, and wait for the operation to complete.

Finally, let us remind you that during the gadget update operation, not a single file with information will disappear. All content and settings will be saved in their original form - as they were before the procedure began. But keep in mind that for locked phones this operation can be fatal. There is a danger that during the update all the data the user needs will be erased. Therefore, it is highly not recommended to update on locked devices.

So, flashing iPhone 6 firmware is a simple procedure, accessible even to an inexperienced user. In most cases, there is no need to contact the service to carry it out. By doing everything yourself, the owner of the device will save time and money.

When the question is about how to flash a Chinese iPhone 5s on Android, the answer implies a similar pre-flash as for any device running on Android.

If you clearly state what is needed to flash the device, you will get a simple list of actions.

All you need to flash a Chinese iPhone is:

• Corresponding driver;
• Flasher program;
• Direct firmware;
• USB cable.

The problem, in fact, is not how to flash a Chinese iPhone 5s, but in finding suitable drivers and firmware, and from the manufacturer whose “product” the purchased iPhone is. A driver is absolutely necessary; it helps to combine the device with the computer, and then reflash the whole or a specific partition. It is recommended to start flashing if the iPhone is charged at least sixty percent.

How to completely reflash a Chinese iPhone 5s

First you need to run the flasher program, for example, SP Flash Tool.

Select "" in the program window that opens. Explorer will open, in which you will need to find the folder with the firmware, and in it go to target_bin and select the file with the corresponding processor. For example, XXX_Android_scatter_emmc.txt(in which XXX- processor number). Leave the program open.

The next step is to install drivers. To do this, you need to open " device Manager", and turn off the iPhone. Remove the battery from the device and immediately insert it back. After this, you need to connect the phone to your personal computer using a USB cable. In the window " device Manager"An unidentified device will be highlighted with a yellow icon, you must click on " Update drivers" In the explorer that opens, specify the path to the corresponding folder with drivers.

If no failures occurred and the drivers were successfully installed, you can proceed to the next step - installing the firmware. To do this, return to the previously opened program SP Flash Tool. Here, on the taskbar you need to click on “ Firmware -> Upgrade", this will begin the installation of the firmware. A small window that appears on the screen will indicate that it is completed.

How to reflash one partition

For the case when it is necessary to reflash only one partition, there is such a feature. In the program window that opens, you should leave the checkboxes only opposite the desired section, and uncheck the rest. Then, in the warning window that pops up, click the “ Yes».

Before performing various actions on your device, we recommend reading this article in full.

Flashing a mobile phone is necessary in cases where a complete replacement of the device’s software is required, often leading to the loss of all data. The reason for the firmware update may be the penetration of unnecessary applications or viruses into the mobile phone. Let's look at the procedure for flashing the Chinese iPhone 4s firmware.

What do we need

• Personal Computer;
• iPhone 4s made in China;
• required iTunes software (firmware 5.0.1) and Snowbreeze utility.

Operating procedure

1. For the firmware we need two files: the snowbreeze-v2.8b11.exe utility and the original Iphone 4s firmware itself (file Iphone 4s_5.0.1.9A405_restore_orig.ipsw).

The firmware can be downloaded from the website www.apple.com, and the utility from a specialized resource.

2. Launch the snowbreeze-v2.8b11.exe file by double-clicking on it:

- click on “Ok”:

— drag the firmware further with the mouse (note that each firmware has its own snowbreeze.exe file):

— click on the firmware program, after which a window with an application with 3 existing modes will appear:

• Baseband Preservation Mode;
• Simple Mode;
• Expert Mode.

To work on the firmware of our mobile phone, we use Expert Mode, which is most suitable for the Chinese iPhone 4s.

— click on the Expert Mode sign and the General button, a window will open:

In the Enoble Battery-Percentage sign you can set the battery discharge percentage, but it is better to activate this function in the statistics of the phone itself;

— check the Activate The iPhone (Hacktivate) table;
— skip the rest of the tables and click on Build IPSW:

— wait for this window to load, after which the created firmware must be saved on the desktop by clicking on OK:

— move the firmware with the mouse to our folder and rename it so as not to confuse it with the previous version:

3. Turn off our mobile phone and connect it to the computer, for which we use the “Power” and “Home” buttons:

- press both buttons;
- 3 seconds after the “apple” goes out on the screen, release the “Power” button and continue to hold “Home” for 10 seconds. The phone is ready for further use.

4. Launch snowbreeze again and enable iREB:

5. Press “START”, after which the phone loads a special mode for installing the firmware:

6. Launch iTunes.
7. On the keyboard, hold down the Shift key and click “Restore”:

The firmware is finished.

We covered this in detail in earlier articles.

Chinese copies of the iPhone running the Android operating system have become an excellent replacement for the expensive counterparts of the American company. Their advantage is that outwardly they are practically indistinguishable from the usual “Apple” gadgets, but inside they have all the advantages of Android devices. However, the only drawback of such devices is the firmware, which the user must update himself. In this post, you will learn what the latest firmware is for a Chinese iPhone on Android, and how to install it correctly on the device.

The essence and purpose of the firmware

It should be noted that the program has an intuitive interface in English. Any Android device user can understand its functionality.

As for the installation issue, you won’t have to worry for long. It is enough to unpack the archive with the program to any directory on your PC. The program is launched according to the standard from a file with the extension .exe.

To flash the firmware for an Android iPhone, it is not enough to simply connect the device to a computer with the Flash Tool application running. You should definitely keep your finger on the Home button. This way you give your smartphone permission to make software changes. In fact, this is a kind of entry into safe mode, but without additional manipulations.

You must hold the button until a red line appears in the flasher window, which means that the utility has found the device and is ready to start flashing it.

When you release your finger from the Home button, the boot bar will change color to purple, which means the device is checked to ensure it meets all the fundamental parameters. As soon as the check is completed, a yellow loading line will appear in the program window, indicating the installation process.

Do not interfere with this process under any circumstances. Otherwise the installation will fail.

Turning on a copy of an iPhone on Android for the first time after flashing the firmware

After flashing the device and disconnecting it from the computer, you get a turned off gadget, ready to start. Press and hold the power button until the bootloader icon appears.

By the way, after flashing, instead of the standard Apple logo, you can see a green robot. This effect can be corrected if necessary.

As for the download itself, it can take several minutes. The reason for this is the process of updating system databases and settings in accordance with interface algorithms.

Flash Tool deals exclusively with database replacement. Basic setup and adaptation to the new OS takes place during the first launch. Do not remove the battery and press all the keys randomly. Wait for the process to complete.

Selecting language settings

Once the installation process is complete and you see the familiar but updated interface of the iOS shell superimposed on Android, you will have to start setting up the language.

Depending on the new firmware installed, the default language may be English or even Chinese. To change the language, you will need to go to the “General” settings section and find the “Language” item in it.

If you have reset your smartphone to Chinese, check out the examples of pictures on the Internet that are located next to the “Language” column. Once you find the desired setting, all you have to do is change the language with just a couple of taps on the screen.

It should be noted that when choosing Russian or any other language, you will have to confirm the process. To do this, click on the button in the upper right corner of the screen.

Installing the GO Keyboard

On many versions of Android iPhones, the keyboard initially does not work correctly, which is why you will definitely agree to replace it with a working software product from a third-party developer. An excellent example of this type of utility is GO Keyboard.

You can install the program directly from the Play Market. It is free and can be installed on any version of iPhone running Android OS.

The program will delight you with an intuitive, customizable interface. You can independently change the keyboard display style, its size and select the current set of functions in the toolbar.

When you boot up an Android iPhone with updated firmware, you may encounter the classic Android lock screen, as well as the familiar green robot. The usual combination of numbers and symbols can correct this situation and return the classic bootloader and iOS lockscreen.

How to flash a Chinese iPhone?

Updating your smartphone software is necessary for it to work correctly. Let's look at how to flash a Chinese iPhone without contacting a specialist.

Before starting such an important process as flashing, you should prepare everything you need.

In addition to the device itself, you will need:

• laptop or PC with Internet access,
• connection cable,
• current firmware.

iTunes and the application located Snowbreeze can help you update the software.

Smartphone firmware

Before flashing the firmware, you need to make a copy of the system, contacts, media files and SMS messages. This will allow you to save important data and return to the old version if the device does not start after installing the new software. So here's what to do:

1. You must start the firmware by launching the previously downloaded Snowbreeze program. It will help modify the original file and adapt it to the needs of the Chinese device. To process the firmware file, drag it into the program window and enable Expert Mode, then check the Activate The iPhone (Hacktivate) item. You also need to set the “Enable Battery-Percentage” mode. To generate a modified file, you need to click on the “Build IPSW” button. After processing, the user will receive ready-made firmware for installation.
2. After this, you should connect the Chinese device to the PC and enable DFU mode on it. This can be done by holding down the Power and Home buttons.
3. Launch the Snowbreeze program, enable iREB ​​mode in it and click on the Start button. After launching iTunes again, click “Restore” while holding down the Shift key. Select the previously created firmware and proceed to install it.
4. Wait for the process to complete.

Now you know how to reflash a Chinese iPhone. You may also be interested in our other articles.

Internet on Android