Perhaps one of the most common problems among tablet users is the inability to unlock the device due to not knowing the password, which can be forgotten or even accidentally changed, resulting in loss of access to the device. However, you can remove the password from the tablet, but you need to do it correctly so as not to lose the data saved on the memory card. What to do if the owner has forgotten the password on the tablet In the event that you do not remember your password on the Android tablet, there are several basic recovery methods that differ in complexity and effectiveness. The first, easiest way is to simply enter a different meaningless set of characters instead of a password until the Android OS prompts you to enter your Google account login information. If it works, just enter the nickname and password you use in Gmail and the tablet will be unlocked. If you don’t remember these parameters, then they can be restored using a special form that Google offers. This method is the simplest, but it is not always effective, so we move on to the next one. The second method is suitable for those who backed up their data before flashing their device. If this is the case, then you can easily use Recovery mode and simply restore the data, thereby unlocking the tablet. Also, some manufacturing companies offer special proprietary programs along with their devices to reset the password on a tablet, for example, Kies from Samsung. The third way to remove a password from a tablet involves the ability to connect to a PC. The point is, after connecting your device to the computer, save all the necessary data on your hard drive, and then return to the factory settings. This allows you to reset not only alphabetic passwords, but also graphic ones. How to reset (remove) a password on a tablet All of the above methods on how to reset a password on a tablet, to one degree or another, involved solving the problem using various programs. Now let's talk about the most “neglected cases”, when all the previous options have been tried, but nothing helped. In this situation, you can use another trick - call the tablet. During a call, you must not reset it, but minimize it by clicking on the button with the image of a house at the bottom of the screen. After that, go to the security menu, where we delete or change the password. If none of the methods helps, then you will have to say goodbye to all the data on the tablet and perform the Hard Reset procedure. To do this, you need to disconnect the battery from the device for 5-10 seconds, and then return it to its place. Next, hold down the power key and the volume up key, then in the menu that appears you will need to select Reset Android. After this, your tablet will restart and you can use it again. It is worth noting that this procedure may differ on different types of tablets, so you should read the instructions before performing it. How to change the password on a tablet Changing the password on a tablet is not difficult even for a novice user who is just getting acquainted with his device. In order to do this, you need to go to the “Settings” menu, select “Security”, then you will see an option asking you to set and change the password.
Nowadays, almost every Internet user at home has a modem or wi-fi router, thanks to which the Internet works.
It’s not uncommon to change some modem parameters, for example, or the Internet settings themselves.
When entering the settings, the modem requests authorization data in the form of a login and password. On Huawei modems, the standard admin/admin are not suitable, and in this article you will learn all the login and password options for entering the settings of Huawei modems using the Huawei hg8245h as an example.
How to enter the settings of Huawei hg8245h?
First, connect to the modem via wire or Wi-Fi and type 192.168.100.1 in the address bar of any browser and press Enter.
Entering the modem's IP address into the browser's address bar
A window should appear asking for your login and password.
Window for entering login and password
For Huawei hg8245h the following login/password combinations are possible:
- login (Account) – root, password (Password) – admin
- login – telecomadmin and password - admintelecom
If none of the above combinations work, it means someone changed them, in which case you will have to reset the modem to default settings using the reset button on the side panel.
Reset button to reset Huawei hg8245h
In this case, the Internet and Wi-Fi settings will be lost and after entering the settings you will have to set them again.
Also, sometimes when you enter the address 192.168.100.1 in the address bar of the browser, a window asking for login and password does not appear. In this case, you need to read the article
The optical modem ont huawei hg8245 is a completely worthy representative of the glorious ancient Chinese family of Huawei. But seriously, the device will be a good solution both for home use and for creating a reliable corporate network. In skillful hands, its capabilities are very extensive and multifaceted.
And in this article we will look at how to set up a Huawei hg8245 wifi router under Rostelecom, as well as what functions this optical terminal supports.
By the way, the peculiarity of this modem is its two-level administration system: for major changes you will need a superuser password (which is blocked by Rostelecom on all modern firmware). Of course, with the help of “brainstorming” it can be dug out from the router’s configuration file, but in most cases “the game is not worth the candle” and for simple home use standard publicly available settings are quite sufficient.
Huawei HG8245: technical specifications
The Huawei hg8245 router is designed for connecting to a local network for the Internet, television and telephony using GPON technology.
At the same time, the device supports data exchange at GE line speed with a bridge connection, and 900 Mbit/s in a NAT scenario.
Among the main features of the ont hg8245 terminal it is worth noting:
- - processing of Internet signals, IPTV and VoIP (arriving via an optical channel);
- - creation of a wireless WiFi access point;
- - virtual server support, NAT, DMZ and DDNS functions
- - remote diagnostics of problems;
- - Ethernet connection monitoring, etc.
Ont hg8245 terminal: description of connectors
On the back panel of the Huawei hg8245 router there are:
Optical port OPTICAL, designed for connecting fiber optics
Do not look into the optical port to avoid eye injury.
LAN1 – LAN4 - connectors for connecting user devices via a network cable;
TEL1 – TEL2 – connectors for connecting telephone cable (VoIP telephony);
ON/OFF – button to turn the device on/off;
POWER – connector for connecting a power adapter.
On the side panel of the Huawei hg8245 modem there are:
BBU - connector for connecting an external battery;
USB port for connecting external media;
WLAN button to turn on/off the Wi-Fi function;
The RESET button is necessary to reset the router settings to factory settings.
To reset the settings, you must hold this button pressed for 10 - 15 seconds.
On the top panel of the ont huawei hg8245 there is a block of indicators:
The POWER indicator indicates the presence of power supply (green color – power from the mains, orange – from an external battery);
The PON and LOS indicator characterize the optical cable connection. So, if the Huawei hg8245 los LED blinks red, then the device receives a low level of optical signal.
The LAN1 – LAN4 indicators light up when the corresponding port on the back of the device is activated (with a normal Ethernet connection, the LED lights up steadily).
The TEL1 – TEL2 indicators indicate the activation of the VoIP telephony ports;
USB characterizes the connection to the optical terminal of external devices;
The WLAN indicator lights up when the WiFi function is activated;
The indicator lights up steadily when the WPS function is enabled.
Further instructions provide for the initial setup of Huawei HG8245. If the optical terminal has been in use before, you must first reset its settings to factory settings using the RESET button.
Setting up a Huawei hg8245 router by Rostelecom
To set up a Huawei hg8245 wifi router under Rostelecom, you first need to connect it to your computer using a network cable (supplied with the device).
Then on this PC you need to go to and set the static IP address 192.168.100.2 there, and leave the subnet mask 255.255.255.0
Important! Static IP is set only during the initial setup of the router. After setting up the Huawei hg8245 Rostelecom, you should set a dynamic IP address in accordance with the instructions at the above link.
Huawei hg8245: login and password
To log into the Huawei hg8245 Rostelecom router, you need to launch any Internet browser on your PC, enter 192.168.100.1 in the address bar and press the “Enter” (or “Go”) key.
An authentication window will open where hg8245 will ask you to enter your login and password.
Default for Huawei router MGTS hg8245 login and password: “root” and “admin”,
however, on many firmware versions Rostelecom installs login(account) : telecomadmin And password: admintelecom.
Enter the required authentication parameters and click the “Login” button
How to set up wifi router huawei hg8245?
If this is not the case, check the missing boxes and click the Apply button to save the settings.
The next step is to create a new connection. To do this, go to the WAN menu tab and click the New button.
If any connections have already been established in this section, they should be deleted to avoid system failures.
In the new connection settings window, set the following parameters:
Mark the “Enable WAN” marker;
In the WAN Mode line, select Route WAN from the list;
In the Service type line, set Internet;
Check Enable Vlan;
In the VlAN ID line, enter the VLAN ID. (VLAN ID must be the same as the VLAN ID on the OLT). It ranges from 1 to 4094. This parameter must be specified in your contract with your provider (otherwise you can check it with the technical support service of your Internet provider);
In the Encapsulation mode line, select the type of Internet connection provided to you (this parameter is also specified in the agreement with the provider);
In the IP acquisition Mode line, the provided method for obtaining an IP address is:
DHCP – dynamic address;
Static – static (permanent) IP address. When selecting this mode, you will also need to enter the IP address allocated to you, the subnet mask, the IP addresses of the active and backup DNS servers and the default gateway (from the agreement with the provider).
In PPPoE mode, you must enter a username and password (from the agreement with the provider).
Check the Enable NAT checkbox and click the Apply button to save the connection you created.
After saving the settings, a configuration page will appear with a new Internet connection.
Router hg8245: bridge mode
To configure the hg8245 router in bridge mode, when creating a new connection, select bridge mode in the Mode column, and IP Bridget in the Bridge type line.
How to set up iptv on a Huawei hg8245 mgts router?
To set up IP TV on the Huawei hg8245 gpon router, you need to create a new connection in the WAN tab, where in the Service type line select IPTV and enter the VLAN ID and Multicast VLAN ID from the agreement with the service provider.
Click Apply - a second connection for IPTV should appear on the configuration page.
Now you should check if the IGMP feature is enabled. To do this, go to the Network Application -> IGMP Configuration tab and check that Enable IGMP is active.
This completes the basic setup of the Huawei hg8245 Rostelecom router. The activity of the created connections can be checked in the Status tab - the connection status should be Connected, and an IP address for each device should be assigned in the IP Address column.
Huawei echolife hg8245: wifi setup
To configure wifi on the Huawei hg8245 Rostelecom router, go to the WLAN -> WLAN Configuration tab and set the following parameters here.
SSID Name – the name of your WiFi Network, which is displayed in the “Search for available networks” of wireless devices;
Associated Device Number – the maximum number of devices that can connect to your network;
Authentication Mode – authentication mode. For greater security, it is recommended to use WPA2 Pre-Shared Key;
Encryption Mode – encryption type. For greater security, it is recommended to install AES;
WPA Pre-Shared Key – password for your wireless network from 8 to 63 characters. Here you can change the Huawei hg8245 wifi password.
Channel Width: WiFi channel width. If you only use 802.11n devices, then set it to 40MHz. If you are using 802.11b or 802.11g devices, then it is recommended to set it to 20 MHz. If different devices are used, set Auto 20/40.
To apply the installed configuration, click the Apply button and scan your WiFi network on any wireless device. If you find a network with the name you specified in the SSID line, then connect to it and enter the password (WPA Pre-Shared Key).
After completing the setup of the Huawei hg8245 Rostelecom wifi router, do not forget to specify dynamically obtaining an IP address in the network card settings.
This instruction is aimed at showing how to unlock Huawei and Honor if you forgot the password or pattern you set on your phone. Nowadays, mobile gadgets are an integral part of our lives. We store various information in the device’s memory, including important information that is undesirable for unauthorized persons to view. Therefore, solving the problem of protecting our data from prying eyes is worth taking care of first. Fortunately, software developers took care of this and created a considerable set of protection methods such as passwords, graphic keys, fingerprint recognition and even the owner’s face.
However, sometimes there are situations when something useful becomes a problem for the user of the mobile device. For example, you let your child play with a smartphone or tablet, after which it turns out that your child has blocked the device using any of the available security methods and cannot unlock it, or you simply forgot the lock code. And today we will tell you how to unlock a Huawei and Honor phone if you have forgotten your password or key. Let us immediately note that the reset instructions provided below apply to all types of blocking.
The only way to unlock Huawei and Honor if you forgot your password, key, pin code
Already during the setup of a password or graphic key, the system notifies us “Remember your PIN code. There is no way to recover a forgotten PIN". Similarly with the password and graphic key. This means that if the user forgets it, the user will not be able to reset the password!
However, there is a solution to reset the password on Honor and Huawei - do a hardware reset and return the smartphone to its original form. Unfortunately, the next solution to the problem will erase all your data on your smartphone or tablet, because the second method involves resetting to factory settings (aka Hard Reset). But later you will have access to your smartphone. Therefore, we strongly recommend periodically.
Despite the inability to enter the system workspace, we can still turn off the smartphone by holding down the power button. And so, we do the following:
The entire process described above, how to reset a password on Huawei and Honor, is shown in the video:
An outdated method that doesn't work now
After you have entered the wrong graphic key (pattern or password) 5 times, the following message will appear on the screen: “Forgot the graphic key,” which you need to click on. After this, you will be asked to enter the email address and password for the Google account to which the device is linked. Next, select the unlocking method, in our case a graphic key, and create a new key. We enter the key again and see the desktop. Below is a video with a clear example of how to unlock Huawei and Honor.
To protect access to your smartphone, Android OS provides the ability to set a password on the lock screen. The user can choose the password form: text, numeric or graphic key. Often, users forget the set code words and numbers and cannot unlock the phone if they have forgotten the password. For such cases, the developers have provided several effective ways to restore access to the device.
Note! Some methods may not be suitable for your phone model, due to differences in operating system versions or lack of Internet connection or root rights. We recommend performing all the methods described below one by one, skipping those that are not suitable for your smartphone model.
Reset your password using your Google Account
To successfully complete this method, you will need to remember your login information for the Google account to which your smartphone is linked. This method is the easiest and fastest option for resetting a forgotten password on Android OS. After several incorrect attempts to enter the code, the message “You have entered an incorrect PIN” will appear on the screen. Try again in 30 seconds." Click OK.Immediately after the timer starts, the “Forgot your password?” button will appear in the character entry window. Click on it. Then, in the new window, enter your email address and password to sign in to your Google account. After confirming your identity, the PIN will be reset and the desktop will open.
If your gadget is not connected to the global network, you can use the following trick. On some Android smartphones, you can open the notification center shade. Click on the "Wi-Fi" icon. The phone will connect to the router automatically if you have previously established a connection to this router. This way you will connect your phone to the Internet even when it is locked. Similarly, you can connect the gadget to the 3G network by clicking on the icon corresponding to it.
Unlocking Samsung Galaxy smartphones
Users of Samsung Galaxy smartphones can easily restore access to a phone with a forgotten password using the standard Find My Mobile function. A prerequisite is that the Internet connection must be turned on on the locked smartphone. To reset your password remotely, you will need a computer or any other smartphone. Follow the instructions:
Also, we wrote an article: . After a successful unlock, a corresponding notification will appear on the web page. Take your phone, its screen will be unlocked and the password will be reset. To set up a new code word or pattern, use the gadget settings. Along with the access password, we recommend setting a fingerprint unlock. This way you can instantly unlock your device even if you forget the passcode.
Performing a Hard Reset
This method allows you to reset a forgotten key, even on a smartphone without an Internet connection and without root rights. The advantage of this method is the quick recovery of the gadget without extraneous programs and functions, the disadvantage is that all files and applications will be deleted from the smartphone. Before resetting, we recommend that you remove a removable memory card from your phone so as not to lose all the information recorded on it. Do not forget to remove the SIM card, otherwise the numbers will be deleted.Follow the instructions:
- Turn off the device and activate Recovery mode;
- In smartphones, this mode can be invoked in different ways. It all depends on the gadget model and the installed firmware version. Most often, you need to hold down the “Volume Up” and “Power” key combination for 10-15 seconds. The combination “Volume Up” + “Volume Down” + “Power” can be used;
- A line menu will appear on the smartphone screen. In 95% of cases it will be displayed in English;
- Navigate between lines by pressing the volume keys. Select is the power button. Select "factory reset/wipe data".
For Sony Xperia smartphones
Manufacturers often come up with simple ways to restore access to the desktop. If an entire service for tracking phones with the ability to reset passwords was developed for Samsung Galaxy, then Sony decided to do something much simpler and created a simple code for resetting pattern keys and codes.The combination works on all Xperia series phones. On the display, open the emergency call window by pressing the button of the same name. Enter code *#*#7378423#*#*. You can use it to call up the manufacturer's service menu. Then click on the “Service Test” tab. A new options window will open. In it, select “NFC” - “Dag Test”. After completing the task, click on the “Home” button. You will be redirected to your smartphone's desktop.
