Rostelecom provides its subscribers with various equipment for rent, including routers. The company is not engaged in the production of equipment, but in world practice, a scheme is widely used in which the manufacturer supplies the provider with equipment without a logo, and the provider has already applied his own. Rostelecom does the same (it cooperates with huawei, zte, eltex, sagemcom, etc.), which means that customers may have different models in operation. In this article, we will look at universal ways to gain access to the settings of the router.

How to enter the router settings

So, you got a router for rent or bought it, came home and want to set up the Internet or make some other settings (for example). To do this, you need to open the package, connect the power and cable to the router, but not the one that comes to your apartment from the entrance, but which will connect the router to a computer or laptop. Connect the other end of the cable to your switched on computer. For most router models, the admin panel is available at 192.168.1.1 or 192.168.0.1 ... Enter one of them into the address bar of your browser and hit enter.

After that, a window for entering your login and password should appear in front of you.

The login and password for entering are indicated in the operating instructions for the router, but if you could not find such information there, then try the following combinations:

• login - admin, password - empty
• login - admin, password - admin
• login - admin, password - password
• login - admin, password - 1234

If one of the combinations came up, then a page with available router settings will open in front of you.

If these options did not work, then you need to reset the settings to the factory settings. To do this, find the Reset button on the back wall and hold it down for a few seconds with the router turned on.

Basic settings of the Rostelecom router

The first tab of the router settings displays a summary of the current state of the device. We do not make any adjustments here.

The second tab is used to configure the Internet connection. Select the interface you need (in our case PPPoE / VPN) and click on the "add connection" button.

In the window that opens, you need to select a protocol, come up with a name for connection, enter a username and password for Internet access (this information should be in your agreement), as well as the server address. Leave the rest of the items in the "auto" state.

If you have several computers at home, then on the next tab you can assign each device its own ip address in your home network.

The next tab is responsible for configuring Wi-Fi. Here you need to set the name of your network, select the type of encryption and come up with a password.

The manufacturer regularly releases firmware updates in which it fixes errors detected by users and adds new functionality to the device. This is why it is worth checking regularly for available updates. Go to the settings tab and find the "update" item there. The screen will display the version of the current firmware and available for updating. All you have to do is click on the "install" button.

As you can see, with minimal knowledge, you can configure the router yourself without calling a company specialist at home. Ask questions in the comments and we will help you, but for now we recommend watching a video on this topic.

Rostelecom continues to develop FTTH technology (Fiber to the Home) - fiber to the apartment or cottage. Now many homes are already using Eltex XPON equipment, and apparently in the future Rostelecom will use only this equipment.

An Eltex optical terminal is installed in the apartment, which is immediately configured for the services you ordered and everything works, at least it should))

I will describe how to set up wi-fi on the ELTEX-ntp-rg-1402g-w terminal. By default, wi-fi on this terminal is already configured, you just need to find your wi-fi network, this is usually the "strongest" signal strength, it should be located near the terminal. To find out the password for the wi-fi network, look at the bottom of the terminal, it starts with "ELTX" and then there are letters with numbers, we enter everything considering that all Latin letters are BIG. You may want to change the password for Wi-fi - read the article further. There is one thing, but at the moment these terminals do not even have the ability to change the network name and password. Although I think that it depends on the settings of the provider.

If you find a wi-fi network and do not know the password from it, then it is not very difficult to find it out.

Take the terminal and turn it over. There is a sticker at the bottom of the terminal, here are the sereiniks of this terminal, they are the key to wi-fi

If you want to change the network name and the password itself, then go to the web interface by 192.168.1.1 further login and password " user ""user "(without quotes) you will be logged in as a user. To enter the web interface of the Eltex NTP-RG 1402G-W terminal, you need to enter the login - admin password - password Then the settings will be more advanced and you can configure the terminal in bridge mode

Choosing wi-fi and security

In this field, as in the screenshot, the password for wi-fi is written if you click on the link next to it, you can see what kind of password it is.

You can filter by MAC addresses

On this terminal, there are quite a few settings regarding wi-fi, you can play around with various configurations.

P.S When the installation is going on, the installer must register the so-called codeword on the terminal. Menegement -> Pon Password This is usually the line installation order number. Everything else is configured remotely by tech support.

Complete instructions for configuring ELTEX terminals, you just need to find your model.

Read 646000 once

Rostelecom continues to develop FTTH technology (Fiber to the Home) - fiber to the apartment or cottage. Now many homes are already using Eltex XPON equipment, and apparently in the future Rostelecom will use only this equipment.

An Eltex optical terminal is installed in the apartment, which is immediately configured for the services you ordered and everything works, at least it should))

I will describe how to set up wi-fi on the ELTEX-ntp-rg-1402g-w terminal. By default, wi-fi on this terminal is already configured, you just need to find your wi-fi network, this is usually the "strongest" signal strength, it should be located near the terminal. To find out the password for the wi-fi network, look at the bottom of the terminal, it starts with "ELTX" and then there are letters with numbers, we enter everything considering that all Latin letters are BIG. You may want to change the password for Wi-fi - read the article further. There is one thing, but at the moment these terminals do not even have the ability to change the network name and password. Although I think that it depends on the settings of the provider.

If you find a wi-fi network and do not know the password from it, then it is not very difficult to find it out.

Take the terminal and turn it over. There is a sticker at the bottom of the terminal, here are the sereiniks of this terminal, they are the key to wi-fi

If you want to change the network name and the password itself, then go to the web interface by 192.168.1.1 further login and password " user ""user "(without quotes) you will be logged in as a user. To enter the web interface of the Eltex NTP-RG 1402G-W terminal, you need to enter the login - admin password - password Then the settings will be more advanced and you can configure the terminal in bridge mode

Choosing wi-fi and security

In this field, as in the screenshot, the password for wi-fi is written if you click on the link next to it, you can see what kind of password it is.

You can filter by MAC addresses

On this terminal, there are quite a few settings regarding wi-fi, you can play around with various configurations.

P.S When the installation is going on, the installer must register the so-called codeword on the terminal. Menegement -> Pon Password This is usually the line installation order number. Everything else is configured remotely by tech support.

Complete instructions for configuring ELTEX terminals, you just need to find your model.

Read 646000 once

The device provides access to high-speed Internet and modern telephony services, as well as the ability to organize a home network.

Router overview, indicators and connectors

Multifunctional terminal ELTEX NTP-RG-1402G-W, in addition to standard router options, can interact with modern TVs and telephones.

Equipped with Gigabit Ethernet ports, you can take advantage of today's high-speed connectivity options. The presence of connectors for IP-television, provides the ability to connect IPTV and use IP-telephony.

Thanks to the support of the wireless 802.11n standard, the Wi-Fi bandwidth reaches 300 Mbit / s. The table below summarizes the main characteristics of the device.

Indicators

The front panel of the router is very informative and contains a significant number of LED indicators. They are convenient when making settings for the device and, in addition, allow you to diagnose problems with the operation of the device.

Indicators indicate the following operating modes of the terminal:

1. Wi-Fi connection (If it is on without blinking, then wi-fi is active. A blinking LED indicates an ongoing data transfer process);
2. Connection to the power supply network (in the case of the applied default settings, it lights up orange. If the changed parameters are used, then - green.);
3. LAN ports connection status (by the color of this LED you can judge the connection speed, for example, orange - 1000 Mbit / s, green - 10/100 Mbit / s);
4. Telephony (when the receiver is off-hook, it lights up green. When receiving a call, blinks. Starts blinking quickly when there is no authorization on the server.);
5. TV (if there is no connection with the TV, then it starts to glow red);
6. Connection to a fiber-optic network (the presence of a connection is indicated by a green glow, the absence - by a red one.);
7. Status LED (solid green when a PPP session is established, otherwise solid orange).

Connectors

At the back there are two external antennas, all ports and connectors, as well as the On / Off button.

Their list includes the following elements (from left to right):

1. On / Off key;
2. Socket for power supply via a complete power supply unit with an output voltage of 12 volts;
3. USB port;
4. Special connector for connecting a television wire;
5. Two connectors for connecting with telephones;
6. Four Gigabit LAN ports;
7. A socket for setting up a connection to an optical line;
8. Reset key.

Configuring an Eltex router from Rostelecom step by step

The main advantage of this device is the automatic receipt of parameters from the provider. There is no need to call the wizard to configure the router.

For example, specialists from Rostelecom (RTK) can register the configuration on the station equipment, that is, remotely.

In this case, the owner of the device is only required to log into the web interface in order to configure the wireless home network.

The procedure for setting up an Internet connection is also not very difficult. Below is a guide on how to do it yourself.

Preparatory activities

Before starting the setup procedure, you need to connect the terminal. Unfortunately, in the list of accessories, apart from the user's manual and the adapter for connecting to the 220 V mains, there is nothing else.

All wires need to be purchased additionally (LAN, TV and telephone cables). Thus, it should be borne in mind that the final price of the connected terminal is not much, but it increases.

Connection procedure and connection settings:

Internet connection

It is necessary to perform the following sequential actions:

Note: If the name and access code specified in the documentation and on the sticker of the device do not work, it means that the former administrator changed them.

You will need to contact him to find out the parameters. If it is impossible to find out the authorization data from the former owner of the terminal, it is necessary to roll back the device settings to the factory state.

For this purpose, a “Reset” button is provided on the rear panel of the device. Armed with a sharp object, for example, a toothpick, you should press it and do not release it until the device restarts (approximately a few seconds).

After rebooting, the router will have factory settings and the login and password shown on the sticker will become valid again.

Wi-Fi

To set up Wi-Fi, you will need to complete the following steps:

Port forwarding

To carry out port forwarding on this terminal, you will additionally need to use the FlylinkDC ++ application.

The procedure consists of the following basic steps:

1. Using the technique described earlier in this guide, start the web configurator;
2. Enter the "Network Services" section;
3. Activate admission for "UPNP";
4. Click "Apply";
5. Restart the device;
6. Download an additional application from the global network, install it on a PC;
7. Run the installed program;
8. Enter the "Settings" menu;
9. Go to the "Connection settings" tab;
10. Specify the settings necessary for the user;
11. Check the box "Firewall with UPnP";
12. Click "Save".

IPTV

There is no “IPTV” tab in the firmware of the terminal model under consideration, therefore parameters are entered in the “PortMapping” tab. Here you should specify the port through which the TV set-top box is connected and select "STB Bridge".

Other settings

The device has a parental control option. In order to configure it, you need to perform the following steps:

The Eltex router is a model designed not only for organizing local networks. It is a multifunctional terminal with additional functions of providing the consumer with eltex telephony and iptv support. Router Eltex Rostelecom and its configuration require attention.

In addition to the standard functions of the router, the Eltex rg 1402g w model has the ability to interact with telephone sets. Communication is carried out using encryption through proxy servers, the anonymity of subscribers is preserved.

The expansion of the capabilities of the device is achieved by receiving television packets using FTTH transmission technology - a fiber-optic feeder to the house.

The router supports the IEEE 802.11n wireless standard, which is compatible with earlier 802.11b and 802.11g standards. This allows you to reach a speed of 150 Mbit and support modern methods of encrypting messages when working in a local network.

Router Eltex rg 1402g w: indicators and connectors

To connect consumers, connectors, ports and buttons located on the rear panel of the device are used:

• ON / OFF - general power on / off button;
• 12V - connector for connecting an external power adapter;
• USB - standard port for external devices;
• PON - connector for connecting a fiber optic cable from an Internet provider to an eltex optical terminal;
• LAN: P0 / P1 / P2 / P3 - ports for connecting consumer devices that do not have wireless WI-FI adapters;
• Phone0 / Phone - connectors for connecting telephone sets;
• 2 connectors for connecting wireless antennas for network subscribers with WI-FI adapters;
• F - button (under the protective cap) for resetting the terminal settings to the factory default values.

The terminal front panel indicators (their color and behavior) allow you to visually monitor the status of different parts of the router and assess the health of communication lines with consumers. Front Console Indicators:

• WI-FI - monitoring the status of the wireless network;
• LAN: P0 / P1 / P2 / P3 - estimation of the speed of the established connection;
• Phone0 / Phone1 - defining the operating mode of the telephone communication channel;
• TV - information about the iptv level;
• PON - determining the state of the Internet;
• Status - evaluation of the passed PPP session authorization;
• Power - the state of the hardware configuration (default configuration / configuration differs from the factory settings).

How to set up an internet connection on an rg 1402g w router

The Rostelecom Eltex router is configured using a personal computer (PC) or laptop connected to one of the LAN outputs of the router. In order to configure the router, it is necessary to perform a series of operations for the computer to obtain a network address in automatic mode. It is necessary to consistently go through the chain: Start - Control Panel - Network and Sharing Management. Having opened the page, you need to turn to the left column and select "Change adapter parameters" in it.

Going to the network connections page, you need to select a PC connected via a local network. Clicking on its designation with the right mouse button, select the "Properties" item in the context menu that opens. On the next page, left-click to open Internet Protocol version 4 (TCP / IPv4) and enter it by clicking on the "Properties" tab. It is required to set markers (checkboxes) opposite the items: get an IP address automatically and get a DNS server address automatically.

After this action, all information fields should be empty. Then you must confirm with "OK". If before that the field was occupied by a set of numbers, then they must be fixed and saved in a separate place.

WiFi configuration on Eltex router

To configure the device, you need to connect to it via any web browser. The router is an independent device with its own IP address. With the saved Eltex factory settings, it should be 192.168.1.1 (192.168.0.1). It must be entered into the address bar of the browser and press "Enter".

The authorization page should open. With factory settings: username is user, password is user. Then click "Send". On the main page of the router in the left column you need to open "WI-FI" and select "Basic".

On the next page it is necessary to place "check marks" in the items "Wireless" and "WMF". In the SSID field, enter the name of the created Eltex network and indicate the maximum value of wireless subscribers in the "Max Clients" line. After that, you need to apply and save the entered values ​​(Apply).

On the page of the "Security" network security item, you need to duplicate the identifier of the new SSID in the corresponding field and select the most secure WPA2 / PSK encryption method from the list of proposed ones. You need to set a strong password to log into the wireless network, which is recommended to be kept in a separate place inaccessible to unauthorized persons. After entering the data, they must be applied and saved (Apply).

In the "Management" tab, press the Reboot button and in a minute the router will be rebooted and ready to work. For more reliable protection of the created network, you need to change the standard user - password for entering the settings menu on the start page - to an individual one (at least 8 characters).

Advanced router settings

You can get acquainted with them on the "WI-FI / Advanced" page. You can get to it from the main window of the settings menu by selecting the "WI-FI" tab. Here you need to select the "Advanced" item and open it. The following fields will be available on the page:

• "Band" - select the frequency range of wireless communication;
• "Channel" - determination of the working channel in the selected range - from 1 to 13 and Auto;
• "Auto Channel Timer (min)" - automatic selection of the most free channel;
• "Transmit Power" - selection of the power (%) of the transmitted signal;
• "URE" - use the terminal as a repeater (Repiter);
• "STA Retry Time (sec)" - setting the time required to start a communication session with a client.

After entering the necessary information, it must be applied and saved (Apply / Save) by clicking on the appropriate tab.

How to set up an iptv connection

To receive television in the iptv format, the Rostelecom provider provides a special set-top box. It is possible to use a WI-FI connection to distribute television signal packets received over a fiber-optic cable. The TV must have a wireless adapter for this. But this method has a number of difficulties associated with the propagation of a signal through the air in an enclosed space.

If a Rostelecom set-top box is used, it must be connected to the LAN ports (PON2, PON3). The wire for the computer is used to configure the connection (PON0, PON1). You can enter the router settings menu on a computer that automatically receives the IP address and DNS server address via Internet protocol version 4 (TCP / IPv4).

After completing all the steps for configuring the router described above, on the main page in the left column, you need to select the "Port Mapping" item - port map. On the page that opens, in the "Port 2", "Port 3" fields, select "STB-BRIGDE" from the list provided and save the data (Apply / Save). After that, the router will work in bridge mode and transmit information from the provider's iptv directly to the set-top box.

Additional features of the Eltex rg 1402g w router

Parental control is configured by selecting the "Parental Control" item in the menu on the start page. A rule is created for a "child" device on the network. It indicates the days of restrictions on the Internet, the start and end time of the blocking.

Port forwarding

Port forwarding or forwarding is used to gain access to data on another device on the local network to exchange traffic through various applications. This is done in the "NAT" router menu. The virtual server contains the port number, the IP address of the computer that accesses it, and the protocol used for the exchange. All ports are closed by default.

Emulators