On this page, we will not describe the pros and cons of this Android device, we really look forward to your feedback on the device. Here you will find and be able to download the custom original firmware, the official firmware version MIUI v4, MIUI v5 android from our website, and you can also see video instructions for installing the firmware for Explay Blaze and leave a review.

To download the firmware for your phone Explay blaze with Android 7.0 Nougat (Nougat), Android 6.0 Marshmallow (aka Android M or Marshmallow) or Android 5.0 Lollipop (Lollipop), you need to read the entire page and find the link. There are also firmware Android KitKat 4.4.x (Kitkat) and Android 4.3 Jelly Bean (Jelly Bean), as well as older versions, but we do not recommend downloading them, due to the fact that this is outdated software. The fifth version of Android has stepped far ahead of its predecessors, not to mention versions 6 and 7, worked out to the smallest detail. Below you will find an overview of the latest Android versions and can compare them.

Do not forget to write a full review of this model in the comments. By doing this, you can help other users make a decision to purchase the device.

Availability of firmware: available.

Download Firmware

When adding a review to our site through the comments system, do not forget to indicate your real email if you need advice and you were unable to install the firmware according to our instructions. Instructions for firmware are on the download page. Our help in the form of consultations is free of charge and therefore there may be delays in our responses, since there are many who wish. Download firmware for Explay blaze can be produced both through a torrent with instructions in Russian, and directly without depositfiles and other bloodsuckers.

Installation instructions

• Click on the download link by selecting the firmware you need

1. Download Android firmware M - we checked you, to be honest, M is Marshmallow, follow the second link

• Download the file with firmware and application
• Run the application file
• Select the required firmware version
• Follow the instructions from the file archive

Explay Blaze Firmware Video

Device price

The local currency price depends on the dollar exchange rate.

useful links

Rooting Explay Blaze

If you want to get root rights, I recommend that you use the program Rootkhp for a computer - this is one of the new programs with a large base of supported Android smartphones and tablets. The program works only under Windows; it is recommended to use emulators for Linux and Mac OS systems.

You can download the program for free from the official website Rootkhp.pro which is easily found through Google.

How to unlock your pattern

Removing a forgotten graphic key, regardless of its complexity, has ceased to be a global problem even for an ordinary user who is not familiar with the protection mechanisms of the Android operating system and its loopholes. Not so long ago, we came across a program for unlocking the pattern Gaigunlock (Gaigunlosk). Step-by-step instructions in Russian and a description of the program are published at the link above.

All firmwares for E B presented here have been tested by our specialists for functionality. To correctly and safely perform the E B firmware, you should carefully study the sequence of actions and be sure to make backup ones. By clicking on the link, you will see instructions for working with this program. If you need firmware E B write in this thread the full number of your model and the required version of android! Delivery is available! Tel. If you have gnawing questions on firmware E B, please visit the forum. A site that offers users mail services, search, dating, storage of photos and videos, files, online games, horoscopes, etc. Instructions for firmware E B

Touchscreen E B black. The firmware, which can be downloaded from the official website, will help to get rid of constant failures in E B's work. You can agree on the time and address of delivery in Yekaterinburg when placing an order for Smartphone E from the manager of the Naviburg Internet store. Firmware E B with FT. We will fix it on the day of treatment. Important Firmware E A. There are many cases when problems arise, such as after firmware E B does not catch the network or does not turn on at all. To execute the E B firmware, you need to download the drivers and new firmware

To carry out the E B WIKO S firmware you need a computer with OS W, a cable for connecting the device to a USB port and a program. Ask a question regarding firmware E B. Here you will find stock and official firmware for E B, as well as step-by-step instructions for installing the software. Here you can download the firmware for phone E B running on A 4 for free. Turn off the device and simultaneously hold down the keys. It is best to start the process of flashing E B by keeping the previous version of the firmware, this will allow you to restore the device to work. How to use and flash through

INSTALLED A FIRMWARE FROM A DIFFERENT MODEL. 02 A Link to firmware. Call 7 800 for free. F MC100 phone encouraging pirated downloads? For example, do not disconnect the device from the PC while uploading. Rating Less than five ratings? Touchscreen E B black. If you have questions about the E B firmware, please visit the forum. Downloading the firmware of an inappropriate model may damage the device! WF to make everything work and load

EXPLAY BLAZE FIRMWARE, DRIVER AND FIRMWARE. First, download the firmware for E B and copy it to the device memory. To determine the phone model and firmware version, you need to go to the Menu.

This article contains information about the mobile device. Here you can download the latest Android firmware on Explay blaze and you can also get root rights.

You can learn more about root rights. Instructions for obtaining are below.

When to update the firmware

• I would like to install a new firmware to expand the capabilities of the mobile device;
• Recovery after unsuccessful firmware needed
• The smartphone is constantly rebooting for no reason;
• The device does not turn on.

What firmware do we have

To download the firmware Android 8.0 Oreo, 7.1 Nougat, 6.0 Marshmallow, Android 5.1 Lollipop on Explay Blaze read the full article - this is important. By installing the new available version of Android, you will be amazed at the new features. And also you can download the official MIUI firmware version of different versions and custom original firmware.

If you have any questions, you can contact us through the comments form.

Availability of firmware: available.

Download Firmware

After writing a review through the comment system, please indicate a real email if you have problems installing the firmware. Please note that we provide free consultations, therefore we may respond with a delay. In addition to the administration, ordinary users can answer and help you, just like on the forum.

Instructions for installing firmware can be found on the links below. Firmware download for Explay Blaze is available via torrent with instructions.

Firmware installation instructions

To download, select the firmware you need and click on the link.

To install, do the following:

• Download the file with firmware and special program
• Run the program on the computer
• Select the required firmware version
• Follow the instructions from the file archive

Explay Blaze Firmware Video

Explay blaze runs under the operating system Android 4.2... Its performance is rated 3 out of 5 (in its segment). This smartphone is quite productive. Here are the characteristics of the device, instructions on how to reset the settings, flash the device and, of course, how to get root-rights to the Excel

Root on Explay Blaze

How to get a root for Explay Blaze see instructions below.

Initially try generic MTK root utilities for Blaze model

• (root in one click)
• (collection of root utilities in one)

If it did not work and SuperUser did not appear, then ask for help in a special topic

Specifications

1. Standard: GSM 900/1800/1900, 3G
2. Type: Smartphone
3. Operating system: Android 4.2
4. Case type: classic
5. Control buttons: touch
6. SIM card type: regular + micro SIM
7. Number of SIM-cards: 2
8. Mode of operation of multiple SIM-cards: alternate
9. Weight: 156g
10. Dimensions (WxHxT): 77x156x8.9 mm
11. Screen type: color IPS, touch
12. Touchscreen type: multitouch, capacitive
13. Diagonal: 5.5 inches.
14. Image size: 540x960
15. Ringtone type: polyphonic, MP3 ringtones
16. Vibration alert: yes
17. Camera: 8 million pixels
18. Camera functions: autofocus
19. Video recording: yes
20. Front camera: yes, 2 million pixels
21. Audio: MP3, FM radio
22. Dictaphone: yes
23. Interfaces: Wi-Fi 802.11n, Bluetooth 4.0, USB
24. USB-host: yes
25. Satellite Navigation: GPS
26. Internet access: WAP, GPRS, EDGE
27. Protocol support: POP / SMTP, HTML
28. Processor: MediaTek MT6582M, 1300 MHz
29. Number of processor cores: 4
30. Video processor: Mali-400 MP2
31. Built-in memory: 4 GB
32. RAM: 1 GB
33. Support for memory cards: microSD (TransFlash), up to 32 GB
34. Additional SMS functions: text input with dictionary
35. MMS: yes
36. Battery type: Li-polymer
37. Battery capacity: 2350mAh
38. Book search: yes
39. Exchange between SIM-card and internal memory: yes
40. Organizer: alarm clock, calculator, task planner
41. Date of announcement (ym-d): 2014-03-26

Explay Blaze Review

A beautiful and compact smartphone from the category of cheap. Sadly, at the moment the old version of Android, but here, just below, you can already download KitKat. The disadvantages include old hardware, little RAM (only 1 GB), low display resolution: (And on the plus side, there are two SIM card slots, a low cost + sold in some of the operator's shops, you could take it at a discount. it is also worth considering that now it is 2017, and its release was already in 2014, at that time the smartphone seemed quite cool, almost a flagship.

»

Firmware for Explay Blaze

✅ Official Android 4.4.2 KitKat firmware for Flastool from the analogue of Wiko Slide -
✅ Firmware from a smartphone analogue Micromax Canvas L A108 (sees only half of the RAM, goes into deep sleep) -
✅ Custom firmware AOSP 4.2.2 Jelly Bean -

Firmware for Explay Blaze you can find in the branch In addition, pre-download the necessary software for flashing

What information do you need to know for flashing?

1. Brand / Model [desirable] - Explay / Blaze
2. Processor - MediaTek MT6582M, 1300 MHz
3. LCD Driver (version)
4. Kernel (version) [desirable]

Before flashing and in the process of selecting the firmware, check the basic TX (technical characteristics) through the program

What custom firmwares are there?

1. CM - CyanogenMod
2. LineageOS
3. Paranoid Android
4. OmniROM
5. Temasek's

1. AICP (Android Ice Cold Project)
2. RR (Resurrection Remix)
3. MK (MoKee)
4. FlymeOS
5. Bliss
6. crDroid
7. Illusion ROMS
8. Pacman ROM

Problems and disadvantages of the smartphone from Explay and how to fix them?

• If Blaze does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
• If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
• Doesn't charge (usually iron problems)
• Doesn't see the SIM card (SIM card)
• The camera does not work (mostly hardware problems)
• Sensor does not work (depending on the situation)

For all these problems, contact (you just need to create a theme), specialists will help for free.

Hard Reset for Explay Blaze

1. Settings-> Recovery and reset
2. Reset settings (at the very bottom)

How to reset your pattern

How to reset the pattern if you have forgotten it and now you cannot unlock your Explay smartphone. On the Blaze model, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.

1. Reset graph. blocking -
2. Password reset -

Working with Android