Connecting a D-Link DIR-320 router to a 3G modem. The DIR-320 router manufactured by D-Link is not the most popular router model. However, this particular device is best suited for connecting a 3G modem. If you want to set up a wireless Internet connection not only for a computer or laptop, but also for mobile devices, create a local network using a 3G modem and a router. Why choose exactly D-Link DIR-320? First, this router has all the features required to create such a network. And secondly, it can be purchased at an affordable price.

The characteristics of this router are largely the same as the D-Link DIR-300 model, but there are several significant differences. The D-Link DIR-320 router is equipped with a USB 2.0 type A port for connecting a USB modem. The port is located on the back cover of the device, it is the first connector on the left.

The router supports automatic connection to 2G / 3G wireless network. Additional functions include the ability to enable / disable the PIN code check and change the PIN code. There are several versions of the D-Link DIR-320 router firmware. The optimal firmware version for configuring a 3G modem is DIR_320NRU-1.2.94, it can be downloaded from the Internet. If your device has a different firmware version, this is not critical. You can also connect a 3G modem, just the setup process will take longer.

Connecting the D-Link DIR-320 router to a 3G modem - go to the router

So, let's consider connecting a router with firmware DIR_320NRU-1.2.94. First, let's set up the operating system of the computer: prepare the network card and define the provider's settings. Then you can start connecting and configuring the router. To do this, connect the device and open any Internet browser. In the address bar, enter the IP address of your router (by default - 192.168.0.1).

Press Enter, after that the authorization window appears. Now you need to enter your username and password. By default, the Username / Password combination looks like “admin / admin”. We fill in these fields and press the "Login" button. The system will prompt you to change your password for security purposes. We set a new password and save the settings. Then the authorization form will appear again, where you need to enter "admin" in the "Username" field and a new password in the "Password" field.

Connecting a D-Link DIR-320 router to a 3G modem - setting up connections

In the window that opens, select the "Network" item, and then - "Connections". A table will immediately appear, below which is the "Add" button.

By clicking on this button, you will be taken to the connection settings menu. Then we set the connection type "3G".

In the "PPP Settings" section, fill in the "PPP Username", "Password", "Password Confirmation", "APN" and "Dial Number" fields. Leave the other fields unchanged. Click the "Save" button.

A new window will display information about the created connection. Opposite the desired connection, select the item "Default gateway". Then click on "Save" in the upper right corner. After that, in the "System" window that appears, click "Save with reboot".

If a PIN code is set on the SIM card that is used in the 3G modem, enter the USB modem menu. Select the "PIN" section, enter the code in the appropriate field, then click "Change" and save the settings. This completes the connection of the router to the 3G modem.

The D-Link DIR-320 router can be used not only for working with the 3G standard. You can set up any other kind of internet connection. It will be easy thanks to the convenient and intuitive interface of this

D-Link DIR-320 is a router (router) that allows you to organize a wireless network for connecting to the Internet. A built-in firewall protects users across the entire WiFi network. The router is equipped with additional security (MAC filter) and encryption (WEP and WPS) functions, which minimize unauthorized access to the access point.

Any wireless network needs to be protected from unauthorized connections. There are several ways to restrict access to the router. The easiest of them is to put a password on WiFi. To do this, you need to connect the router to your computer, configure it, and then proceed to setting a password. As an example, let's try to put a password on WiFi D-Link DIR-320.

Fast navigation through the article

Password setting

The password helps protect your wireless network from unwanted connections. To set a password, you need to connect the router to your computer (via a special cable that comes with the kit), configure it and follow these steps:

• Go to the IP address "http://192.168.0.1" (you can use the standard Internet Explorer browser, while, depending on the firmware of the router, the IP for connecting to the control panel may be different - http://192.168.1.1);
• In the field "Username" enter "admin";
• Write “admin” in the “Password” line, or leave it blank (depending on the firmware version of the router);
• Press the "Login" button;
• In the window that appears, on the left side, select the section "WiFi" -\u003e "General settings";
• Check the box next to Enable wireless connection;
• Go to the section "WiFi" -\u003e "Security settings";
• In the "Encryption key" field, create and enter a new password (it is best to set WPA2 encryption mode);
• Press the "Change" button;
• In the upper right corner of the page, select "System" -\u003e "Save and Restart".

In order for a password to become reliable protection, you must adhere to the basic rules for its choice:

• The password must be at least 8 characters long (letters of different sizes, numbers, symbols);
• You can not use the names, surnames, nicknames of animals that may be known to outsiders;
• It is not recommended to use dates of births, weddings, etc .;
• It is better not to use simple words and sets of numbers;
• It is advisable to change the password periodically.

Owners of network devices are often faced with the need to configure a router. Difficulties arise especially for inexperienced users who have never performed similar procedures before. In this article, we will clearly show how to adjust the router on our own, and we will analyze this task using the example of the D-Link DIR-320.

If you just purchased the equipment, unpack it, make sure all the necessary cables are present, and choose the ideal location for the device in your home or apartment. Connect the cable from the provider to the connector INTERNET, and plug the network wires into the available LANs 1 to 4 located on the back

Then open the network settings section in your operating system. Here you should make sure that the IP addresses and DNS have a set marker next to the item "Receive automatically"... For detailed information on where to find these parameters and how to change them, read another material from our author at the link below.

Configuring the D-Link DIR-320 router

Now it's time to go directly to the configuration process itself. It is produced through built-in firmware. Our further instructions will be based on the firmware of the AIR interface. If you are the owner of a different version and the appearance does not match, there is nothing to worry about, just look for the same items in the appropriate sections and set the values \u200b\u200bto them, which we will discuss below. Let's start by entering the configurator:

D-Link DIR-320 firmware allows configuration in one of two available modes. Tool "Click'n'Connect" will be useful for those who need to quickly set only the most necessary parameters, while manual adjustment will allow flexible adjustment of the device operation. Let's start with the first, simpler option.

Click'n'Connect

In this mode, you will be asked to indicate the main points of the wired connection and Wi-Fi access points. The whole procedure looks like this:

The analysis of successfully completed settings is performed by pinging the set address. By default, this is google.com, but if you are not satisfied with this, enter your address in the line and re-scan, then click on "Further".

The latest firmware version has support for the DNS function from Yandex. If you are using the AIR interface, you can fine-tune this mode without any problems by setting the appropriate parameters.

Now let's deal with the wireless point:

Nowadays, many users purchase a set-top box at home that connects to the Internet via a network cable. Click'n'Connect tool allows you to quickly configure IPTV mode. You only need to complete two steps:

This concludes the quick configuration. You have just been introduced to how to work with the built-in wizard and what parameters it allows you to set. In more detail, the setup procedure is carried out using the manual mode, which will be discussed below.

Manual setting

Now we will go through approximately the same points that were discussed in Click'n'Connect, however, let's pay attention to details. By repeating our steps, you can easily adjust the WAN connection and access point. Let's start with a wired connection:

We have covered the basic and advanced WAN and LAN parameters. This is done with the wired connection, it should function correctly immediately after accepting the changes or restarting the router. Let's analyze now the configuration of the wireless point:

1. Go to the category "Wi-Fi" and open the section "Basic settings"... Here, be sure to turn on the wireless connection, and also enter the network name and country, at the end click on "Apply".



2. On the menu "Security Settings" you are prompted to select one of the network authentication types. That is, set up security rules. We recommend using encryption "WPA2 PSK", you should also change the password to a more complex one. Fields WPA Encryption and "WPA key renewal period" you can leave it alone.



3. Function "MAC filter" restricts access and helps you configure your network so that only certain devices get it. To edit a rule, go to the appropriate section, enable the mode and click on Add.



4. Enter the required MAC address manually or select it from the list. The list displays those devices that were previously detected by your point.



5. The last thing I would like to note is the WPS function. Turn it on and specify the appropriate connection type if you want to provide fast and secure device authentication when connecting via Wi-Fi. To understand what WPS is, our other article will help you at the link below.

At home or in a small office. Moreover, it can be used to implement both wireless connection of devices and using a twisted pair. In the latter case, a limitation is imposed: there are only 4 ports, that is how many devices can be connected.

Equipment

The D-Link DIR-320 boasts the following configuration:

user's manual;

• power supply unit with non-removable cord and plug;

  one meter twisted pair, crimped from both ends with appropriate ferrules;

  cD with drivers and electronic version of the router documentation.

Appearance and purpose of connection elements, indication and control

An information panel is displayed on the front of the device, which consists of the following LED indicators:

Power: lights up continuously during operation and indicates that the device is plugged in.

Status: When the router is working normally, it flashes continuously. If it is on continuously, an error has occurred and the device must be restarted.

Internet: it can just light up continuously (if there is a connection, but there is no data exchange) or blink (if there is a connection and information transfer).

The next 4 ports are wired. They light up continuously when connected, and flash during data exchange. If the port is not used during operation, then the corresponding indicator is disabled.

The last LED indicator is linked to the printer. It simply lights up continuously when the printer is connected, and blinks while the document is being ejected.

The following communication and control elements are located on the rear side of the device:

antenna for wireless connection;

uSB port for connecting a printer;

4 LAN ports for creating a wired LAN part;

input port for connecting a twisted pair cable from the provider;

power supply socket;

reset button to reboot the router.

Choosing a location for installing a network device

At the first stage, we choose the right place for installation And here everything is not as simple as it seems at first glance. On the one hand, all wires must fit to the installation site of the router; there must be an outlet nearby for power supply. On the other hand, it is most correct to locate the router towards the center of the room: this will provide an excellent transmission and reception speed, a high Wi-Fi signal level. Also, the router should not be located near metal sheets that can damp the wireless signal. Based on the recommendations given earlier, you need to choose the location of the router.

D-Link DIR-320 sequence

The order of this network device model is as follows:

collecting a temporary scheme for initial setup;

turn on the device and configure it properly;

we disassemble the temporary scheme;

we install the router in a permanent place;

collecting a permanent local area network diagram;

turn on the router;

we test the correctness of the settings in the wired network segment;

we check the performance of the Wi-Fi wireless network.

The router can also be configured at a permanent location, provided that a computer is permanently connected to it by a wired method. Since this condition cannot always be met, it is recommended to do the adjustment in 2 stages.

Temporary connection for configuration

The next step in setting up a D-Link DIR-320 router is collecting a temporary scheme for configuring a network device. To do this, install it next to a PC or laptop. We use the complete crimped to connect a computer and a router. We install one end of it into the port of the PC network card, and the other into any of the 4-wire ports of the router (but not the one that is intended for exchanging data with the provider's equipment). We install the power supply into any nearest free outlet, and the cord from it into the power socket of the router. The timeline is ready.

Setting parameters

Now you need to configure the D-Link DIR-320 software settings. To do this, do the following:

turn on the connected computer and router;

waiting for the computer and network device to boot up;

we launch any of the browsers available on the PC;

in the address line of the browser, type a combination of numbers 192.168.000.001 (this is the network address of our router) and press Enter;

in response, a request will appear with a login and, of course, a password. Enter admin in the first field. Leave the second field blank at the first start. If this is not the first launch, then enter the password in the second field, which was previously set;

in the opened router settings interface, select the "Connection Wizard" item;

then set a new administrator password and confirm it, if necessary;

at the next stage, you need to configure the settings for connecting to the provider's network equipment. This data is provided by the internet service provider and is usually specified in the contract. This includes the type of connection (for example, PPPoE or L2TP), login and password for establishing a connection (if required), static or dynamic network address;

after making all the necessary settings, press the Connect button. Then the router will reboot;

after rebooting the router, go to the settings menu in the previous way and select the "Wireless Network Settings Wizard";

then we set the name of the wireless network at our discretion;

the next step is to set the wireless password. Again, at your discretion;

save the changes and forcibly reboot the router.

Pre-configuration is complete, you can turn off your computer and network device and disassemble the temporary circuit.



We install the router in a permanent place and connect

Now we are installing the D-Link DIR-320 router in a permanent place that most optimally meets the previously given conditions. We bring in all wired communications here: twisted pair from the provider and other devices that connect to the LAN in this way. We connect the incoming wire from the Internet service provider to the "Internet" port. In the remaining 4 ports, we connect the equipment that will use the wired connection. We install the power supply into an outlet, its cord to the socket of the router. After complete collection of the permanent circuit and checking the correctness of the connections, we turn on the router.

Checking the wired LAN segment

After the D-Link DIR-320 NRU router boots up, you can test the wired part of the LAN. To do this, on any computer connected to the router using a twisted pair, go to the network settings (Start \\ Control Panel \\ Network Connections). Next, we create a new connection and save it. We close all windows. We launch any browser and enter any Internet address and press Enter. After that, the start page should open. If this does not happen, we check the settings, which must necessarily be configured to automatically obtain a network address.



We test the wireless part of the local area network

Next, you need to check the performance of the WiFi wireless connection. The D-Link DIR-320 router allows it to transfer information at a speed of up to 54 Mbps. The order of connection in this case is as follows:

The router must be powered on and operational, not in the boot phase.

We activate the Wi-Fi transmitter on any mobile device.

Go to the "Settings" device, select WLAN and click on the "Search" button. When finished, a complete list of all available WLANs will appear.

We select exactly the network whose name was specified at the configuration stage and connect to it. After the prompt to enter the password appears, enter it. At the same time, it is important not to confuse the administrator password for D-Link DIR-320 and the password for gaining access to the wireless network. It is necessary to introduce the second one, and they must be different.

In the future, the color of the Wi-Fi indicator should change: two triangles should appear on it.



Summary

After configuring the D-Link DIR-320 router, this network device will serve you for more than one year. This operation, as a rule, has to be performed only when the equipment is first started. In the future, it functions with the specified values, and there should not be any problems with it.