We are no longer updating the Knowledge Base. The documentation for the current versions of CS-Cart is located at http://www.cs-cart.ru/docs/latest/.
- This article applies to CS-Cart versions:
- 3.0.x
- 2.2.x
- Open the page Settings\u003e Email.
- Select option via SMTP server in option Mail sending method.
- Fill in the fields in the section SMTP server settings smtp.gmail.com:465.
- class.smtp.phplocated in the directory lib / phpmailerYour CS-Cart installation:
// connect to the smtp server $ this-\u003e
to this:
// connect to the smtp server $ this-\u003e - Save the file.
- Create a file mail.php
Gmail SMTP. - http://www.you_domain.com/mail.php
Where www.you_domain.com - the address of your store. - OK
To use an SMTP server to send emails to your gmail account:
- Open the page Settings\u003e Email.
- Select option via SMTP server in option Mail sending method.
- Fill in the fields in the section SMTP server settings... Please note that you need to set the name of the SMTP server along with the port number, for example, smtp.gmail.com:465.
- Replace the following piece of code in the file class.smtp.phplocated in the directory lib / phpmailerYour CS-Cart installation:
// connect to the smtp server $ this-\u003e smtp_conn \u003d @fsockopen ($ host, // the host of the server $ port, // the port to use $ errno, // error number if any $ errstr, // error message if any $ tval); // give up after? secs // verify we connected properly
to this:
// connect to the smtp server $ this-\u003e smtp_conn \u003d @fsockopen ("ssl: //". $ host, // the host of the server $ port, // the port to use $ errno, // error number if any $ errstr, // error message if any $ tval); // give up after? secs // verify we connected properly - Save the file.
If emails are not sent after the above changes, please check if PHP is configured on your server with ssl socket transport support.
- Create a file mail.php in the root directory of your CS-Cart installation with the following content:
The specified code is trying to connect to the server Gmail SMTP. - Open the file using the link http://www.you_domain.com/mail.php
Where www.you_domain.com - the address of your store. - If you see a white page that says OK, this means PHP is configured with ssl socket transport support. If you see an error like this:
Warning: fsockopen (): unable to connect to ssl: //smtp.gmail.com: 465 (Unable to find the socket transport "ssl" - did you forget to enable it when you configured PHP?)
this means PHP is configured without ssl socket transport support. Contact your server administrator and ask him to enable this support.
Not a single project on the Internet is known to be able to work stably for all users, without exception, for an endless period of time. Due to the errors that people have in the process of sending letters through postal services, the topic of resolving such difficulties becomes relevant.
The first step is to draw your attention to the fact that the overwhelming majority of mail services do not have problems on the server side. That is, if you cannot send any letter by email, the reason probably lies in your actions and equipment, and has nothing to do with the actions of the resource's technical specialists.
Before going into a detailed analysis of the problems of each of the most popular services, you should first perform a few steps.
If, due to the fulfillment of all the above recommendations, you have not been able to resolve the problems with sending letters, you can proceed to the analysis of errors in each individual mail service.
Yandex Mail
When touching on the Yandex mail service, it is important to note that this resource allows you to use the system for connecting your own domain name and send any messages on behalf of the desired email. Due to this feature, any problems with sending mail from a third-party domain may come from the invalid registered address.
In addition to the above, an error when sending mail may well be associated with the termination of the domain, its blocking or incorrect settings. Thus, if you encounter this kind of difficulty while using your own domain, check it to see if it works.
Invalid domain name problems also apply to regular mailbox owners. However, the chance of a situation with a user being blocked in Yandex is extremely low.
As for common problems, sending errors most likely originate from the browser or blocking by the recipient. They can be solved by cleaning the browser and by eliminating the fact of the block on the addressee's side.
You can always ask Yandex.Mail technical specialists for help with problems of this kind.
Mail.ru
The email exchange service Mail.ru has few problems delivering messages to the addressee. At the same time, almost any problematic situation can be resolved by one of the most correct method - using special mail programs.
Please note that if sending mail to another user is unsuccessful, you may need to re-forward it.
Often, services such as Gmail automatically, due to the strong differences in work, enter letters from the domain names of the Mail.ru site into a folder "Spam" at the recipient.
Many users also face difficulties due to the incorrect operation of the Internet browser used. We described how to get rid of this at the beginning of this article.
If you are unable to solve the arising difficulties, create an appeal to the technical support of the Mail.ru mail service.
Gmail
The mail service from Google is known to be more aimed at people who use mail to organize mailing or work. In view of this, Gmail guarantees almost complete absence of problems with sending letters, which you can find out about as soon as possible.
If you happen to be among those users of the Gmail service whose messages have ceased to reach the addressee or are sent altogether, you should follow the recommendations for cleaning your browser.
You should also completely eliminate the possibility of common problems such as using non-existent data.
Users who do not receive your emails may have some kind of restrictions on their inbox. Often it comes down to automatic filtering of letters or due to reaching the maximum amount of mail stored on the account.
In case of unsuccessful attempts to avoid mistakes, you should act in the most reasonable way - contact the technical specialists of the Gmail mail service, providing the appropriate screenshots.
Rambler
The service for forwarding Rambler letters does not differ much from the previously named resources in terms of problems encountered by users. In particular, this concerns the need to first check the browser for stability.
A distinctive feature of the Rambler system is the presence of mailbox settings in a special section. Only by setting the settings properly can you avoid most of the problems with this service.
If, despite manipulating the mailbox, you still have errors, it is recommended to write an appeal to the Rambler technical support.
We have prepared for you last week. But in order not to feel any discomfort when working with e-mail on a smartphone, our editorial office offers you a material about the detailed parameters of the Gmail application. After reading this manual, you can fully work with correspondence, choosing all the parameters at your discretion. Setting up Gmail on the phone and the computer has significant differences. Soon we will publish an article about customizing an email inbox from Google and on a PC, but today we will focus exclusively on the mobile version of the program. Stay tuned!
Launch Gmail and tap (click) on a button with three horizontal lines.
In Gmail, there are two types of parameters: these are general, which are relevant to all accounts of the application and are individual for each account separately.
Common parameters
What general settings does Gmail offer? We select the option "General settings" in the menu and go to the submenu.
— Default action... When you delete a message from the thread, the message can be archived and placed in the trash can, or completely deleted from your account. If you mistakenly deleted one of the letters, then you can always access it by accessing the "Trash" menu item.
At the same time, it is synchronized with the Google web service hosted on the server, after which, having logged into your account from any device (computer, mobile or tablet), you will receive the same set of emails in your inbox.
To delete or archive a letter, scroll the line with the letter to the left or to the right, after which a message about the successful operation will appear.
-. When activating this setting, during a long correspondence with one of the users and composing several responses to the original message, a chain will be formed where you can accurately and most fully track the history of the correspondence.
-. Here you can configure the function of archiving / deleting a message by scrolling, which was discussed earlier, in the item "Default action". If you disable this option, you can delete the message only by clicking the button with the trash can on the top panel in an open message.
-. This setting is responsible for whether the avatar of the message sender will be displayed next to the header and recipient of the message.
— Reply All... If you are chatting with several people at once, this setting will allow you to reply to all of them at once. If the checkbox is unchecked, only one of the users you specify will receive the letter.
— Autoscaling... When working with bulky letters, the size of an open form with a message with special formatting will automatically fit to the size of your phone screen.
-. Here you can choose what will appear when archiving / deleting a message: the body of the next, previous letter or a list with all correspondence.
The last 3 parameters allow you to activate confirmation of the following operations: delete, archive and send. If you are afraid that by mistake you may irrevocably lose an important message, enable these parameters by checking the corresponding boxes. It should be noted that activation of these parameters on the test smartphone did not bring any results. Perhaps it depends on the firmware version and the build of the operating system.
Individual mailbox parameters
Now let's talk about how you configure Gmail for each individual account. In the initial settings menu, select the account you want to tune.
-. Here you can specify which of the message lists will be opened by default when the program starts and when you go to the main application form - with incoming or priority letters. Priority letters are marked in a special way, namely with yellow markers of different types, depending on whether you are indicated as the main recipient, group, or the sender indicated you as the addressee in the "Cc" field.
-. If in the previous option you selected the value "Inbox", then just below you can adapt the composition of this category for yourself, namely, which letters will be displayed in the inbox list. This can be messages from social networks, promotions (advertising mailings and other marketing materials), alerts (confirmation of registration, invoices, receipts, etc.), as well as messages from forums.
-. This parameter is responsible for whether incoming messages are displayed at the top of the phone display. This setting will take effect if you have configured email sync (you can do this when adding an account to the mobile version of Gmail, or using the menu option to activate sync, which will be discussed below).
— Vibration and call for incoming... There are options for customizing a sound or a melody that will be played every time a new letter is received, as well as using vibration.
-. Here you can specify a sentence that is automatically attached to the body of the sent letter. It's important to note that this signature will only be valid for messages sent from the mobile version of the Gmail app. The web version for PC has its own signature settings.
-. In this field, you can configure the parameters for automatically sending a reply letter to the specified recipients. Convenient filtering of the autoresponder operation in a given period, composing the header and body of the message is available.
- followed by sync options... When this function is activated, push notifications will be sent to your mobile when new letters have been received. Gmail sync works very accurately and smoothly. Letters can come from the server both via the mobile Internet (if it is convenient for you and you use the anlim network), and via Wi-Fi.
If this option is disabled, you can also synchronize manually by simply flipping the Gmail work form from top to bottom.
Below you can specify the period for which the correspondence will be received during synchronization.
-. In this menu field, you can adapt the sync settings for each shortcut separately according to your requirements. After selecting a shortcut and making one tap on it, you are taken to the shortcut sync settings form.
Here you can select a melody or a sound signal that will be played when correspondence is received, as well as activate a vibration signal.
— Downloading files... When exchanging emails with large attachments, it is often necessary to download attachments automatically if you are connected to a reliable and fast network. This option is just responsible for this possibility. If the box is not checked, you can download attachments when you open a separate letter.
-. In Gmail, all images in emails are displayed automatically. Using this option, you can set a manual confirmation for displaying graphics in a message.
To configure third-party email accounts (yandex.ru, mail.ru, ukr.net, outlook.com), the parameters will be similar, but in this case, several new options will also be available.
Third-party email service parameters
We go to the settings menu and select the desired account.
Now more about the settings themselves:
-. In order not to get confused when working with a large number of connected accounts when setting up Gmail and then using it, here you can specify the name of the account by which you will refer to mail.
-. This name will be seen by all your recipients. You can specify a nickname or choose any name you want.
-. Here you can configure the period how often you want to receive new mail. It is worth thinking about not too frequent a period in order to avoid overflowing the smartphone's memory and quickly draining the battery.
— Incoming / outgoing mail server... We have already entered these settings when creating a new mailbox in the previous article (link at the very top of the article). If the administrator of one of the services changed something on the remote server and mail stopped arriving, here you can enter the necessary parameters, having learned about them in advance on the technical support page of the web service.
Outcome
Google releases updates for Gmail quite often, after which new options and advanced features appear in the program. We will track the emergence of new versions, and if something worthwhile and interesting appears, we will immediately inform you in new articles. We hope that the instructions presented to your attention will be really useful, and the Gmail setup described here will save you a lot of time and nerves spent on independent study of the software product.
Manual measures "Aggressive spam" (also called "sanctions") is an automated or manual kick of a site from a search without the participation of the basic algorithms of Google. The web spam team is quite effective in fighting low-quality sites, so such measures (mistakenly called "filters") take a long time to take, difficult, and arrive quite quickly.
Manual measures come in response to a complaint, based on reports from monitoring systems, or in the course of routine purges of issuance from low-quality sites.
Aggressive spam
As a rule, the site is killed by the WNC-646702 spam bot.This site shows signs of aggressive spam: posting automatically generated meaningless text or content copied from other sites, disguising and / or repeatedly or flagrantly violating Google's Webmaster Guidelines.In case of refusal after a request for verification, a message is received: the site ... still has serious spam problems... The texts of messages in the Search Console periodically change slightly. The meaning of this parking brake is unchanged.
Everything is affected.
Affects all pages.
Aggressive spam objects:
- shitty texts (rewrites and copy-paste) and stolen pictures, that is, the site - rs:
- dropped domain with old measures
- an abundance of ads that turned the site into spam
- automated filling, synomizing, etc. chernukha
- stolen web archive content
- stolen translations into another language
- MFA, doorways, PBN, etc.
- useless rewrites from the YMYL sphere (I recommend to google what it is)
- black monetization (clickunder, wap-click, web mining)
- cloaking
Aggressive spam is never given for purchased links and spam in micro-markup!
!) Actually, if the site is completely rs and the handbrake has arrived, then it is probably easier to kill such a site. The worse the site, the less chances. Or change the domain. But the measures are likely to come again.
!!) If, without experience, they took a drop (abandoned boo domain) with measures, then you will have to develop the site without Google for 3-6 months. The more lively the site looks, the higher the chance to take action... It is foolish to send an empty site or add notes that the domain owner has changed. Nobody will read it. The check is automated.
!!!) To remove the handbrake for Aggressive spam, you need to fundamentally redo the site - overhaul (and not in 1-2 days), rewrite articles, collect comments and change photos for copyright ones. After refusal to request a second check, we take a vacation for several months and prove that the site is necessary and traffic and can be received without Google.
Common mistakes webmasters make when getting manual measures
- To write on the foolishly in order to beg for unban. This also includes aggressive behavior and rude demands.
- Check the uniqueness of the text as a percentage and assume that Google is doing the same.
- Request multiple checks. This will lead to the fact that your request will no longer reach the verification system. 180 days of waiting in line are provided.
- Write along with a review request email for the web spam team. They don't read, and the robot is hardly aimed at a semantic analysis of such opuses.
- Make a minimum wage on the site and try to inflate the verification system.
- Doing a pseudo-SDL (no experience is a waste of time).
- Consider that after the removal of measures, positions will return. Very often, the measures are deliberately delayed (the longer the site is under sanctions, the higher the likelihood that it has lost all its positions and other sites have taken them, which, in fact, they write in a letter to the Search Console that there are no guarantees of return of positions).
- Consider that after the removal of measures for aggressive spam, the rating of the site will be the same. Nothing like this.
- To believe that Google's Edsense will protect you from the parking brake.
- Buying a website with measures.
- Purchase of a beautiful drop with measures (you don't need to go into “drop farming” without experience).
