Main characteristics
Type wall split system Maximum length of communications 15 m Basic modes cooling/heating Maximum air flow 7.5 cu. m/min Power in cooling mode 2215 W Power in heating mode 2350 W Heating power consumption 650 W Cooling power consumption 690 W Supply ventilation mode No Additional modes ventilation mode (without cooling and heating), automatic temperature maintenance, self-diagnosis of faults There is a dehumidification modeControl
Remote control There is On/off timer There isPeculiarities
Indoor unit noise level (min/max) 29 dB / 38 dB Refrigerant type R 410A Phase single phase Fine air filters There is Fan speed adjustment There is Other functions and features anion generator, ability to adjust air flow direction, settings memory function Minimum temperature for operating the air conditioner in heating mode-7 °CDimensions
Indoor unit of a split system or mobile air conditioner (WxHxD) 77.6x24.5x19.6 cmOutdoor unit of split system or window air conditioner (WxHxD) 68x48.2x22.5 cm
Before buying ask about technical specifications and a complete set by the seller
Wall-mounted split system
Models: PS 0808i, PS 0908i, PS 1208i, PS 0908Ni, PS 1208Ni.
User manual
Thank you for choosing products manufactured under the POLARIS brand. Our products are designed to meet high quality, functionality and design requirements. We are confident that you will be pleased with the purchase of a new product from our company.
Before using the device, carefully read these instructions, which contain important information regarding your safety, as well as recommendations for the correct use and care of the device.
Save the instructions along with the warranty card, sales receipt, and if possible, the cardboard box and packing material.
An air conditioner is an expensive technical device. In order to preserve your legal rights and interests, please entrust its installation to qualified specialists. This “Operating Instructions” is universal for wall-mounted split-type air conditioners supplied by our company. The appearance of the air conditioner you purchased may differ slightly from the description in the “Instructions”, but this does not affect its operation and performance characteristics. Please read the sections specific to your model carefully and keep this “Instructions” for future reference.
Addendum to the "Operating Instructions"
The air conditioner is not intended for independent use by small children and infirm persons. It is necessary to eliminate the possibility of uncontrolled access to it by young children.
Air Conditioner Installation Instructions
The air conditioner must be installed by qualified after-sales service personnel or authorized service centers.
· 
A residual current device (RCD) should be installed in the power supply circuit. Seek advice from a qualified professional.
· 
https://pandia.ru/text/78/448/images/image007_12.jpg" width="99" height="123 src=">You cannot use intermediate connections when connecting the air conditioner to the power source. The use of extension cords is strictly prohibited. Also Do not connect other electrical appliances to the power outlet provided for the air conditioner. Incorrect power connection may result in electric shock, overheating, fire and other dangerous consequences.
· 64" height="47" bgcolor="white" style="vertical-align:top;background: white">
· Do not plug into an electrical outlet with wet hands. This may cause electric shock
· https://pandia.ru/text/78/448/images/image011_7.gif" width="108" height="90 src=">It is strictly prohibited to use fuses with a different rating or wires made of other metals. Use instead metal (copper) jumpers may cause air conditioner failure or fire.
· When the air conditioner is operating in cooling mode, it is recommended to minimize the use of heat sources. Move heating devices to another room.
· Do not insert any objects into the air conditioner louvers. If the fan operates at high speed, it may cause injury.
· 
It is necessary to adjust the direction of air flow from the air conditioner. Proper installation of vertical and horizontal air flow guides will ensure uniform air temperature throughout the room.
· Do not wash the air conditioner with water. This may result in electric shock.
· Do not lean or hang or place any objects on the air conditioner. This may cause the air conditioner unit to fall, causing damage or injury.
· 
Make sure that the mounting structures of the air conditioner units are secure. If fasteners are damaged, they must be repaired immediately to prevent the air conditioner unit from falling, which could cause serious injury or other damage.
 |
· Do not sit on the outdoor unit of the air conditioner or place any objects on it. Falling of the air conditioner unit or objects installed on it can cause injury or other serious consequences.
· Do not use the following substances to maintain the air conditioner:
Water, gasoline, paint thinners, benzene, polishing compounds, etc.
The use of these substances may cause deformation or scratches on the surface of the housing.
 |
· During long breaks in operation, the air conditioner should be disconnected from the network by removing the power plug from the outlet. After unplugging the power cord, make sure the air conditioner switch is in the off position.
Procedure for disassembling and repairing an air conditioner
· If it is necessary to disassemble or repair the air conditioner, you should call air conditioner installation and maintenance specialists from an authorized service center.
· In case of abnormal phenomena (for example, the appearance of a burning smell), you must immediately turn off the air conditioner, disconnect the power cord from the network, and contact an authorized service center.
Names of working elements and their functions
Due to the fact that different air conditioner models have significant differences in appearance and usage, only a general sample is given below. Details are given in the following instructions.
https://pandia.ru/text/78/448/images/image028_1.gif" width="240" height="172 src="> How to open: Lightly press both sides of the lower part of the air intake grille and pull it until it stops.
· How to close: Push down the air intake grille, then press it on both sides at the bottom
· Emergency button used for emergency switching on/off of the air conditioner in the absence of a remote control.
Note:
The air intake grille should not be opened at an angle greater than 60 degrees. Don't apply too much force.
Indication on the control panel (for modelsPS-0808i,PS-0908i andPS-1208i.)
(for modelsPS-0808i,PS-0908i andPS-1208i.)
Operations and indications of the remote control
(for modelsPS-0908Ni andPS-1208Ni.)
 |
|
|
|
 |
|
Supplying a control signal from the remote control
MODE" select one of the following modes: automatic (auto), cooling (cool), heating (heat) and drying.
· To change the temperature, use the temperature setting buttons (+/-) in the range from 18°C to 30°C.
· Using the FAN SPEED button, you can set the air flow speed: low, medium and high.
· Using the AIR FLOW button, you can change the direction of the air flow: fan flow, natural flow, one-way flow
· When cooling or heating, you can select the intensive operating mode "HI POWER". Over the next 15 min. the air conditioner will operate at maximum efficiency.
Note:
 |
Attention! The position of the air flow guide in the horizontal direction can only be adjusted manually! When adjusting the position of the horizontal guide, the air conditioner must be turned off!
Mode "ECONOMY"
When you press the "ECONO" button in the "Cooling", "Heating" or "Drying" operating mode, the set air temperature may change by 2°C, the indoor unit fan operates at "Low" speed.
Note: When operating in this mode, the fan speed of the indoor unit cannot be changed.
Setting the current time
· After the batteries are inserted into the remote control, press the "clk" button located under the battery storage compartment cover with something thin (for example, the tip of a ballpoint pen).
· The time display will start flashing.
· Use the "HOUR" button to set the hour.
· Use the "MIN" button to set the minutes.
· Press the "clk" button again. Close the battery compartment cover.
· If there is any problem with the remote control, press the reset button RST.
· To reboot, you can also remove the batteries from the remote control for a while.
Note: Timer operations are based on the current time, so the time must be set accurately.
Automatic air conditioning shutdown functionSLEEP
· The air conditioner turns off after a specified period of time.
· During the remaining time before shutdown, the room temperature is automatically controlled to avoid overcooling (when the air conditioner is operating in the “Cooling” mode) or overheating (when the air conditioner is operating in the “Heating” mode).
· If the air conditioner is turned off, turn it on with the ON/OFF button.
· Changing the specified period of time for automatic shutdown is done with the "SLEEP" button in the range: 1:00, 2:00, 3:00, 5:00, 7:00, 10:00 hours.
· Disabling this feature
When scrolling through the time range, the value reaches 10:00, the next press will turn off the SLEEP function.
Timer function
· To turn on the timer function, press the ON TIMER button while the air conditioner is operating.
· Use the "HOUR" button to set the hour. One press adds one hour.
· Use the "MIN" button to set the minutes. One press adds 10 minutes.
· After setting the time, press the ON TIMER button again to confirm the selected range
· Disabling this feature
Press the ON TIMER button and the display will show the current time. The timer is disabled.
How to replace the batteries of the remote control
· The estimated battery life should be indicated on its case. It may be shorter depending on the date of manufacture. However, the battery may still be in working order after its rated service life has expired.
· The following phenomena indicate dead batteries (replace them with new ones):
The air conditioner unit does not emit a beep to confirm that it has received a command from the remote control.
The display on the remote control becomes dim.
· When installing new batteries, observe the correct polarity.
· Do not use any other type of battery.
· If you do not use the remote control for an extended period, remove the batteries to prevent battery leakage and damage to the device.
Note: You cannot use an old battery with a new one.
· The estimated battery life is 6 to 12 months. If the battery is used for a longer period of time or if non-certified batteries are used, electrolyte may leak, which can damage the remote control.
Features of the air conditioner in heating mode
Basic principles and features of work
· The air conditioner takes heat from the outside air and uses it to heat the indoor air. The heating capacity, based on the heat pump principle, increases or decreases depending on the increase/decrease in outdoor temperature.
· This warm air circulation system requires very little time to heat the room.
· At very low outside temperatures, the system can be used in conjunction with other heating devices. To maintain proper safety and prevent accidents, adequate ventilation must be provided.
Thawing
· At very low temperatures and high humidity outside air, frost forms on the heat exchanger of the outdoor unit of the air conditioner, which negatively affects the heating capacity of the air conditioner. In this case, the defrosting mode is automatically turned on, and heating is suspended for 5-10 minutes.
· During defrosting, the indoor and outdoor unit fans do not operate. "dF" lights up on the display.
· During defrosting, some steam may be released from the outdoor unit (due to rapid defrosting), but this is not a sign of a malfunction of the air conditioner.
· When the defrost period is complete, the air conditioner resumes heating mode.
Care and maintenance
Before starting maintenance, the air conditioner must be turned off and the power cord disconnected from the power outlet.
Before the start of the operating season you must:
 |
· Make sure there are no foreign objects blocking the inlet or outlet of the indoor or outdoor unit.
· https://pandia.ru/text/78/448/images/image041_3.jpg" width="138" height="69 src=">Insert batteries into the remote control.
During the operating season it is necessary:
· Clean the air filter screens (at least once every two weeks).
· Remove the air filter mesh from the indoor unit:
· https://pandia.ru/text/78/448/images/image043_3.jpg" width="151" height="106 src=">To clean the air conditioner housing, use a dry soft cloth or a vacuum cleaner.
· If the surface of the air conditioner is very dirty, it can be cleaned with a cloth moistened with a neutral detergent.
At the end of the operating season
· Set the temperature to 30°C and turn on the air conditioner in fan mode for about half a day.
· This procedure is necessary to dry the internal parts of the air conditioner.
DIV_ADBLOCK68">
· 
Clean the indoor and outdoor units from dirt.
· Remove the batteries from the remote control.
Note:
If the air filter mesh is very dirty or clogged with dust, this will affect the air conditioner's efficiency in cooling or heating the room, and will also lead to increased noise during operation of the air conditioner and increased energy consumption.
When contacting the service center
Please check the following before contacting the warranty service center:
The air conditioner does not turn on.
The air conditioner does not cool or heat the room well
The air conditioner does not cool the room well
The room temperature is not regulated (too cold or too hot)
· Is the temperature set in "CONT" mode?
· In "CONT" mode, the air conditioner operates continuously, regardless of the room temperature.
If, after performing the above checks, the cause of unsatisfactory operation of the air conditioner could not be determined, as well as in the cases listed below, the air conditioner must be turned off and contact a service center.
Contacting the service center
In the following cases, you should immediately unplug the power cord from the power outlet and contact a service center:
|
|
|
|
|
|
|
Often a fuse blows or a circuit breaker trips.
The power cord or plug is excessively hot.
The plug housing or the protective sheathing of the power cord is damaged.
The air conditioner creates interference that affects the operation of the TV, radio, and other devices.
Difficulties when giving commands from the remote control.
Extraneous sounds are heard while the air conditioner is operating.
If, after pressing the "ON/OFF" button, the air conditioner malfunctions, you must turn it off and disconnect the power cord from the network. After 3 minutes, the air conditioner can be turned on again. If the air conditioner still does not work properly, contact a service center.What the user also needs to know
In order to protect the operating elements of the air conditioner, a 3-minute restart delay has been set. The 3-minute restart delay is automatically set by the microprocessor. This function only works when the power is turned on.
 |
When the air conditioner is turned on in heating mode, no air flow occurs.
In the first minutes (from 2 to 5 minutes) of the air conditioner operating in heating mode, no air is supplied until the heat exchanger of the indoor unit heats up.
When the air conditioner is operating in heating mode, the air supply is periodically interrupted for a period of 6 to 12 minutes.
At low temperatures and high humidity outside air, automatic defrosting is performed periodically, after which the air conditioner starts operating in heating mode again. During the defrosting process, steam or water may drip from the outdoor unit.
When the air conditioner is operating in the "Dry" mode, no air is supplied.
The indoor unit fan stops periodically to avoid evaporation of moisture removed from the air, as well as to save energy.
When the air conditioner operates in cooling mode, water spray comes out of the indoor unit.
This phenomenon is sometimes observed at high temperature and humidity in the room, however, it disappears with a subsequent decrease in temperature and humidity.
The supplied air has an odor.
Conditioned air may have an odor caused by particles of tobacco or cosmetics sticking to the internal parts of the air conditioner.
When the air conditioner operates, a crackling noise is heard.
This sound occurs as a result of the circulation of refrigerant within the circuit of the air conditioner unit.
After turning off the air conditioner or disconnecting it from the network, a crackling noise is heard.
This sound is produced by thermal expansion or contraction of plastic parts.
The air conditioner does not turn on when the power is restored.
Data has been erased from the microprocessor memory. They must be entered again using the remote control.
The air conditioner unit does not accept commands from the remote control.
Signals from the remote control may not be received if the receiving window on the indoor unit is exposed to direct sunlight or too much light. You should cover the receiving window from sunlight, or reduce the brightness of the lighting.
Air conditioner installation rules
· It is necessary to make sure that there is no furniture or objects near the air conditioner that could interfere with air ventilation and normal operation of the air conditioner.
· Do not install the air conditioner in the following places: in places where there is a possible leak of flammable gas; in places where oil and similar substances splash.
· If the air conditioner is planned to be used near hot mineral springs, where there is a high content of hydrogen sulfide in the air, or in coastal areas where wind carries moisture from the sea, then before installing the air conditioner, you should seek advice from authorized service specialists or our company representative . In these situations, there is an increased risk of corrosion, which can lead to problems with the operation of the air conditioner.
· It is necessary to equip the condensed water drain from the indoor unit in such a way as not to create inconvenience to other people.
· The air conditioner should not be installed in the laundry room.
Noise when the air conditioner is running
· Before installing the blocks, you must make sure that the supports intended for them are reliable. Supports and fastenings should also not increase noise and vibration during operation of the air conditioner.
· The cold/hot air released through the outlets of the outdoor unit of the air conditioner, as well as the noise during its operation, should not create inconvenience to people living in the neighborhood.
· Do not place any objects in close proximity to the inlet and outlet grilles of the outdoor unit of the air conditioner. This may cause the air conditioner to malfunction and cause increased noise levels.
· If you hear any unusual noise when the air conditioner is operating, please contact authorized service personnel or our representative office
Installation instructions
To ensure proper operation of the air conditioner, please have it installed by a qualified service center in accordance with the instructions below.
Choosing an installation location
 |
Indoor unit
· Securely attach the air conditioner unit to a solid wall.
· The air conditioner inlet and outlet should not be blocked by any objects. Conditioned air should circulate freely throughout the room.
· There should be no sources of heat, flammable gases, or flammable surfaces near the unit.
· The air conditioner should not be exposed to direct sunlight.
· There should be enough space around the indoor unit for easy care and maintenance. The figure shows the recommended minimum distances
External unit
Installation of indoor unit pipes
The pipes to the indoor unit must be routed in the indicated directions 1, 2, 3, 4 and 5. After this, the appropriate slots must be made in the unit’s stand.
Installation of the mounting plate
Firmly fix the mounting plate to the wall with screws, having first leveled it. An uneven position of the plate can lead to uneven drainage of water condensate.
· Pass the pipes of the indoor unit through the holes in the wall.
· Tie the indoor unit tubes tightly with the drain pipe with tape, with the drain pipe at the bottom. (If the humidity is high, water may condense on the part of the drain pipe running indoors.)
For installation of the indoor unit of the air conditioner
necessary:
· The upper and lower hooks fit tightly into the corresponding hooks.
· The block body is in a level position.
· The drain hose does not bend upward.
The drain hose is located at the bottom of the wall
liner.
Wire connections of indoor and outdoor air conditioner units
It is necessary to make wire connections between the indoor and outdoor units of the air conditioner in accordance with the electrical diagrams.
Note:
· Incorrect connection of wires can lead to malfunctions of the air conditioner and damage to its working elements.
· A damaged power cord must be replaced immediately. To do this, contact the manufacturer's representative office or an authorized service center.
· When installing the unit, ensure its unhindered connection to the power outlet
Installation of the outdoor unit
The outdoor unit must be installed on a strong support or stand, the surface of which must be strictly horizontal.
Making pipe connections
· right " style="border-collapse:collapse;border:none;margin-left:6.75pt;margin-right: 6.75pt">
Tightening the bell tube
Flare nut
Torque
Approximate tightening force (20cm wrench)
Diameter 6 mm
Wrist tightening force
Diameter
Shoulder tightening force
Bleeding air from the system
· Place the flare nut of the connecting tube onto the valve connector of the outdoor unit, and tighten it to the torque specified in the table.
· Bleed the air from the indoor and outdoor unit system as follows:
· Remove the two valve plugs from the outdoor unit.
· Unscrew the flare nut connecting the large tube to the lower pressure valve half a turn.
· Using a socket wrench (under the cap nut), loosen the high pressure valve core 1/4 -1/2 turn.
· Bleed air through the flare nut of the large tube for approximately 10 seconds.
· Then tighten the flare nut to the torque indicated in the table.
· Tighten the plugs on the high and low pressure valve cores (tightening torque approx. 49 Nm).
Checking for leaks
· Upon completion of the pipe connections, you must ensure that there are no leaks in the connections - using a special device or soapy water. If a leak is detected, it must be repaired immediately
Model
PS-0808i
PS-09 08i
PS-12 08i
PS-09 08Ni
PS-1208Ni
Operating voltage
Current strength
cooling
Power consumption
cooling
Performance
cooling
Maximum working pressure:
Air circulation
Refrigerant
Noise level
indoor unit
external unit
Degree of protection
indoor unit
external unit
indoor unit
external unitL(m)
Pipe diameter, mm
PS-0808 i
Ø 6.35, Ø 9.52
PS-0908 i
Ø 6.35, Ø 9.52
PS-1208 i
Ø 6.35, Ø 12.7
PS-0908 Ni
Ø 6.35, Ø 9.52
PS-1208 Ni
Ø 6.35, Ø 12.7
Wire size, fuse
Wire cross-section, mm² | Fuse, A |
|
PS-0808 i | ||
PS-0908 i | ||
PS-1208 i | ||
PS-0908 Ni | ||
PS-1208 Ni |
Operating temperature range
Room temperature | Outdoor temperature |
|
cooling | ||
Troubleshooting
Fault code | Malfunction |
The temperature sensor of the indoor unit radiator is damaged |
|
Air temperature sensor is faulty |
|
The indoor unit motor is faulty |
|
External unit malfunction |
|
Thawing. |
Note: Due to ongoing changes and improvements, there may be some differences between the instructions and the product. The manufacturer hopes that the user will pay attention to this
Certification Information
The device is certified for compliance with regulatory documents of the Russian Federation.
Estimated product life: 6 years
Warranty period: 1 year from the date of purchase
Manufacturer:
LLC "Texton Corporation"
1201 Market Street, Wilmington 19801, Delaware, USA
Guarantee obligation
Product: Wall-mounted split system
Models: PS 0808i, PS 0908i,1208i, PS 0908Ni, PS 1208Ni.
This warranty is provided by the manufacturer in addition to the consumer rights established by the current legislation of the Russian Federation, and in no way limits them.
This warranty is valid for 12 months from the date of purchase of the product and covers the product against defects in materials and workmanship. In this case, the consumer has the right, among other things, to have the product repaired free of charge. This warranty is valid subject to the following conditions:
The product must be purchased only in Russia, and exclusively for personal household needs. The product must be used in strict accordance with the operating instructions in compliance with the rules and safety requirements. The manufacturer's obligations under this warranty are fulfilled in Russia by sellers - authorized dealers of the manufacturer and official service centers. This warranty does not apply to products purchased from sellers not authorized by the manufacturer, who are independently responsible to the consumer in accordance with Russian legislation. This warranty does not cover product defects resulting from:
- Chemical, mechanical or other influence, ingress of foreign objects into the inside of the product; Incorrect operation, which consists of using the product for purposes other than its intended purpose, as well as installing and operating the product in violation of the rules and safety requirements; Wear of trim parts, lamps, batteries, protective screens, debris storage devices, belts, brushes and other parts with a limited service life; Repair of a product performed by persons or companies that are not authorized service centers*;
For all warranty issues regarding POLARIS products, please contact your nearest authorized POLARIS retailer.
Wall-mounted split system
Models: PS 1012BIO 3D, PS 1312BIO 3D
User manual
Thank you for choosing products manufactured under the POLARIS brand.
Our products are developed in accordance with high quality requirements,
functionality and design. We are confident that you will be pleased with your purchase of a new
products of our company.
Before using the device, please read these instructions carefully.
which contains important information concerning your safety, as well as
Recommendations for the correct use and care of the device.
Save the instructions along with the warranty card, cash receipt,
options, cardboard box and packaging material.
An air conditioner is a complex technical device. For conservation purposes
your legal rights and interests, please have it installed by qualified
specialists. This "Operating Instructions" is universal for
wall-mounted split-type air conditioners supplied by our company.
The appearance of the air conditioner you purchased may differ slightly from the description in
"Instructions", however this does not affect the procedure for its operation and working
characteristics. Please carefully read the sections relevant to your
model, and keep this “Instructions” as a reference material at hand.
Safety instructions................................................................... ........................................................ .....................4
Names of working elements and their functions.................................................... ....................................7
Indoor unit maintenance................................................................... ........................................................ .......7
Indoor unit display indication................................................................. ........................................................ .8
Product contents........................................................ ........................................................ .........................8
Remote control............................................... ........................................................ ......9
Using the remote control. Air conditioner operating modes...................... 10
Features of the air conditioner in heating mode.................................................... ......................... eleven
Basic principles and features of work................................................... ................................. eleven
Defrosting........................................................ ........................................................ ............................... 12
Additional properties and functions of the air conditioner.................................................. ............................ 12
Rules for installing an air conditioner...................................................... ........................................................ ...... 12
Noise when the air conditioner is running.................................................... ........................................................ ............ 13
Installation instructions........................................................ ........................................................ .................... 13
Choosing an installation location........................................................ ........................................................ .............. 13
Indoor unit........................................................ ........................................................ ....................... 13
External unit........................................................ ........................................................ ............................ 13
Installation of indoor unit pipes................................................................. ............................................... 14
Mounting the mounting plate................................................................. ........................................................ ... 14
Drilling holes in the wall.................................................... ........................................................ ....... 14
Installation of the drain pipe................................................... ........................................................ ............. 14
Installation of the indoor unit of the air conditioner.................................................... ................................... 14
Wire connections of the indoor and outdoor units of the air conditioner.................................................. 15
Installation of the outdoor unit................................................................... ........................................................ ....... 15
Making pipe connections................................................................... ............................................... 15
Bleeding air from the system......................................................... ........................................................ ........ 15
The polaris company began its activities in 1992. Since then, products under this brand have become popular among consumers around the world. The plant producing climate control equipment is located in Israel, and compressors are supplied by trusted companies: Hitachi or Mitsubishi. Among a wide range of models for office and home, industrial and commercial facilities, you can choose a unit with different capacities that meets all requirements.
Types of split systems
Among Polaris air conditioners there are several main types:
- Floor-standing. These are quite mobile air conditioners and you can independently move them around the room and install them in the place where it is convenient at the moment.
- Ceiling. Such split systems do not clutter up the space, do not collect dust and are practically invisible in the interior.
- Wall-mounted. This is the most popular type of air conditioner. They are easy to install and do an excellent job of maintaining a comfortable air temperature.
- Window. They can be installed by the owners themselves, have the simplest and most economical design and are a monoblock installed in the window opening.
- Duct. Designed to control the climate in several rooms at once, allowing you to maintain a uniform temperature throughout the entire apartment or organization.
Among the models of each type, you can choose a polaris split system, designed for the volume of air in the room. The Polaris ps system includes several models of wall-mounted air conditioners.
Comparison of characteristics of popular models
| Model/parameter | POLARIS PS-0808I | POLARIS РМА-0912 | POLARIS PS-1012Ni Bio 3D |
| Cooling, kW | 2,3 | 2,5 | 2,78 |
| Heating, kW | 2,6 | – | 2,78 |
| Noise level, dB | 30/55 | 30/55 | 29/39 |
| Operating modes. | Has an ionizer | Dehumidification mode | Modes: ventilation, temperature maintenance, night, dehumidification |
| Power consumption during cooling/heating, kW | 0,89/0,86 | 0,80/- | 0,86/0,77 |
| Remote control. | Yes | No | Yes |
| Type. | Wall split system | Mobile monoblock | Wall split system |
Instructions for the control panel and Polaris air conditioners
Each model with remote control comes with a remote control for the Polaris air conditioner. With its help, it becomes possible to adjust the operating parameters of the cooling or heating system. The remote control is able to function correctly within the room. All control of the wall-mounted air conditioner is carried out using the remote control. It has several buttons, the purpose of which can be understood by studying the instructions:
- Increase/decrease temperature. These are the most used large and visible buttons on the remote. They are located in the center.
- On/off. A different button from the others, located in the corner.
- Fan speed selection.
- Maintaining minimum/maximum air temperature.
- Selecting the operating mode.
There is also a display on the remote control that shows important settings for the mechanism. To correctly interpret the symbols on the display, you will first have to use the instructions.
Using the remote control
A mobile air conditioner usually does not have a control panel, since to adjust parameters and operating modes, you just need to press a few buttons on the body, standing in an accessible place on the floor.
For Polaris, the instructions for the air conditioner begin with safety precautions. After listing the included parts, operating instructions are described in detail. If you follow all the points, the split system will last a very long time and will not require repair or replacement. The instructions also provide diagrams for the correct connection of the equipment, and a manual for installing and using the air conditioner comes with it.
Polaris air conditioner error codes
When it comes to explaining to the technician what happened to the split system and why it is not working, error codes come to the rescue. Each air conditioner is equipped with a self-diagnosis system. This means that if there is a problem, it turns off and displays an error code on the screen. If you remember the most popular ones, you can save significant time on diagnostics:
- E2 – outside air temperature is measured incorrectly.
- E3 – the temperature sensor in the internal module is not working correctly.
- E4 – the outdoor module is broken.
- E5 - the motor of the indoor module is not working properly.
- dF – it is necessary to clear the internal module from icing.
Troubleshooting
A description of all errors and the necessary measures to eliminate them can be found in the instructions for the air conditioner. It should be remembered that it is best to entrust the repair of such equipment to professionals; they will be able to repair the equipment and at the same time give a guarantee for their work.
“Wall-mounted split system POLARIS Models: PS 0812Ni BIO 3D, PS 1012Ni BIO 3D, PS-1212Ni BIO 3D Operating instructions Thank you for choosing...”
Wall-mounted split system
Models: PS 0812Ni BIO 3D, PS 1012Ni BIO 3D, PS-1212Ni BIO 3D
User manual
Thank you for choosing products manufactured under the POLARIS brand.
Our products are developed in accordance with high quality requirements,
functionality and design. We are confident that you will be pleased with your purchase of a new
products of our company.
Before using the device, please read these instructions carefully.
which contains important information regarding your safety, as well as recommendations for the correct use and care of the device.
Save the instructions along with the warranty card, sales receipt, and if possible, the cardboard box and packing material.
An air conditioner is a complex technical device. In order to preserve your legal rights and interests, please entrust its installation to qualified specialists. This “Operating Instructions” is universal for wall-mounted split-type air conditioners supplied by our company.
The appearance of the air conditioner you purchased may differ slightly from the description in the “Instructions”, but this does not affect its operation and performance characteristics. Please read the sections specific to your model carefully and keep this “Instructions” for future reference.
Names of working elements and their functions
Indoor unit maintenance
Indoor unit display indication
Product contents
Remote control
Using the remote control. Air conditioner operating modes
Features of the air conditioner in heating mode
Basic principles and features of work
Thawing
Additional properties and functions of the air conditioner
Air conditioner installation rules
Noise when the air conditioner is running
Installation instructions
Choosing an installation location
Indoor unit
External unit
Installation of indoor unit pipes
Installation of the mounting plate
Drilling holes in the wall
Installation of the drain pipe
Installation of the indoor air conditioner unit
Wire connections of indoor and outdoor air conditioner units
Installation of the outdoor unit
Making pipe connections
Bleeding air from the system
Checking for leaks
Outdoor unit wire connections
The final stage of installation
Air conditioner test run
Inspection and Maintenance
Care and maintenance
Before the start of the operating season
During the operating season
Cleaning the air conditioner
At the end of the operating season
Before contacting the warranty service center
Contact the service center if
Need to know
Specifications
Troubleshooting
Certificate Information
Guarantee obligation
Safety Instructions Installation of the air conditioner must be carried out by qualified after-sales service personnel or authorized service centers.
Air conditioner units should not be installed near areas where flammable gases may leak. If gas accumulates near the air conditioner unit, a fire may occur.
A residual current device (RCD) should be installed in the power supply circuit. Seek advice from a qualified professional.
The air conditioner must be properly grounded. The ground wire of the air conditioner must be firmly connected to the ground terminal of the power supply. Failure to have a reliable ground connection can result in electric shock and other hazards.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless such persons have been given supervision or instruction concerning use of the appliance by a person responsible for their care. safety.
Children must be supervised to prevent them from playing with the appliance.
You cannot use intermediate connections when connecting the air conditioner to a power source.
Incorrect network connections may result in electric shock, overheating, fire, or other hazards.
Do not squeeze, stretch, or heat the power cord. The power supply line must not be damaged or tampered with. This may result in electric shock, overheating, fire, etc. If the power supply line of the air conditioner is damaged or needs to be replaced for any reason, the work must be performed by authorized service personnel.
Do not plug the plug into an electrical outlet with wet hands. This may cause electric shock
The power cord plug must be free of dirt and fully inserted into the outlet. Dust on the plug or loose contact may result in electric shock or fire.
It is strictly forbidden to use fuses with a different rating or wires made of other copper metals. Using metal (copper) jumper wires instead of fuses may result in damage to the air conditioner or a fire. I'm hot Try to keep warm air and sunlight out of the air-conditioned room. When the air conditioner is operating in cooling mode, it is recommended to cover the windows with curtains or blinds.
When the air conditioner is operating in cooling mode, it is recommended to minimize the use of heat sources. Move heating devices to another room.
Fuel-burning devices should not be used in air-conditioned areas. Fuel combustion may be incomplete.
It is prohibited to spray insecticides, paints or other flammable substances on the air conditioner or in the air in its immediate vicinity. This may cause a fire.
If it is necessary to use an air conditioner and devices based on fuel combustion in the same room, the room must be periodically ventilated. Poor ventilation can result in a lack of oxygen and other dangerous consequences.
Before servicing the air conditioner, it must first be disconnected from the network.
It is strictly forbidden to wipe the air conditioner units while rotating the fan blades. Danger Do not insert any objects into the air conditioner louvers. If the fan operates at high speed, it may cause injury.
It is necessary to adjust the direction of air flow from the air conditioner. Proper installation of vertical and horizontal air flow guides will ensure uniform air temperature throughout the room.
You should not be exposed to cold air for a long time. This can cause discomfort, which can have negative health consequences.
Do not wash the air conditioner with water. This may result in electric shock.
Do not lean or hang or place any objects on the air conditioner. This may cause the air conditioner unit to fall, causing damage or injury.
Make sure that the mounting structures of the air conditioner units are secure. If fasteners are damaged, they must be repaired immediately to prevent the air conditioner unit from falling, which could cause serious injury or other damage.
Do not sit on the outdoor unit of the air conditioner or place any objects on it. Falling of the air conditioner unit or objects installed on it can cause injury or other serious consequences.
It is prohibited to use the following substances to care for the air conditioner: water, gasoline, paint thinners, benzene, polishing compounds, etc.
The use of these substances may cause deformation or scratches on the surface of the housing.
During long breaks in operation, the air conditioner should be disconnected from the network by removing the power plug from the outlet. After unplugging the power cord, make sure the air conditioner switch is in the off position.
Names of operating elements and their functions The following drawings of the structure of the internal and external units of the air conditioner only in general terms correspond to the device. The appearance of the purchased device and its parts may vary. Details are given in the following instructions.
Maintenance of the indoor unit To open the front panel of the indoor unit, lightly press both sides of the lower part of the air intake grille and pull it until it stops (in the direction indicated by the arrows in Fig. 2).
To close, slide down the air intake grille, then press it on both sides at the bottom. The emergency button is used to turn on/off the air conditioner in an emergency if there is no remote control.
Note:
The air intake grille should not be opened at an angle greater than 60 degrees. Don't apply too much force.
Indoor unit display indication Product contents Indoor unit with mounting plate Outdoor unit Power cable Remote control (batteries included) Operating manual Warranty card List of service centers Remote control (RC)
– – –
Using the remote control. Air conditioner operating modes Procedure for replacing batteries in the remote control The approximate battery life should be indicated on its case. It may be shorter depending on the date of manufacture. However, the battery may still be in working order after its rated service life has expired.
The following phenomena indicate dead batteries (replace them with new ones):
The air conditioner unit does not emit a beep to confirm that it has received a command from the remote control.
The display on the remote control becomes dim.
When installing new batteries, ensure correct polarity.
Do not use any other type of battery.
If you do not use the remote control for an extended period, remove the batteries to prevent battery leakage and damage to the device.
Note: You cannot use an old battery with a new one.
The estimated battery life is 6 to 12 months. If the battery is used for a longer period of time or if non-certified batteries are used, electrolyte may leak, which can damage the remote control.
Using the remote control, operating modes of the device and display indication of the remote control
Point the remote control at the air conditioner and press the ON/OFF button.
There should be no unnecessary objects between the remote control and the air conditioner.
Using the "MODE" button, select one of the following modes: automatic (auto), cooling (cool), dehumidification (dry), heating (heat), ventilation (fan). The “ ” icon on the remote control display indicates which mode is selected (set opposite the specified mode) - Fig. 6.
To change the temperature, use the temperature setting buttons (Figure 5) in the range from 16°C to 32°C. The set temperature is displayed on the remote control display (Fig. 6).
The temperature is automatically set to 25°C. When the operating modes are set to AUTO and DRY, the temperature setting function is not activated.
Using the FAN SPEED button, the desired air flow speed is set:
Low – the icon on the remote control displays medium – the icon on the display high – the icon on the display automatic – the icon flashes on the display
Using the SWING button, the air flow mode is set in the vertical direction:
Natural flow - the indicator of this function on the remote control display (Fig. 6) shows “ ”
fan flow – flashing “ ” icon on the remote control display flow in one direction – icon on the remote control display Using the AIR FLOW button, you can change the direction of the air flow in the horizontal direction: left, right, fixed.
When operating in cooling or heating mode, you can select the intensive operation mode “TURBO”. Over the next 15 min. the air conditioner will operate at maximum efficiency. When this mode is selected, the “ ” indicator lights up opposite the TURBO mode on the remote control display.
Note: When operating in this mode, the fan speed of the indoor unit cannot be changed. This function does not work when the operating modes are AUTO, DRY, FAN.
SLEEP function Pressing this button sets the night mode of the air conditioner. This reduces the airflow speed and dims the display backlight. Opposite this function on the remote control display (Fig. 6) the “ ” icon lights up.
Timer function By pressing the TIMER button when the unit is turned off, you can set the time from 1 to 24 hours after which the air conditioner will turn on. Each press of this button increases the time interval by 1 hour.
By pressing the TIMER button while the device is turned on, you can set the time from 1 to 24 hours after which the air conditioner will be turned off. Each press of this button increases the time interval by 1 hour. When you press the Timer button, the icon appears on the display, ON/OFF and the set time (1H - 1 hour, 2H - 2 hours, 3H - 3 hours, etc. up to 24 hours), through which the air conditioner will turn on / off accordingly.
HOLD button Using this button, you can lock or unlock the remote control buttons. When the key lock is turned on, the “ ” icon appears opposite HOLD on the display.
When you press any active button on the control panel, the air conditioner unit emits a signal, and an icon temporarily appears on the remote control display.
Features of the air conditioner in heating mode Basic principles and features of operation The air conditioner takes heat from the outside air and uses it to heat the air in the room. The heating capacity, based on the heat pump principle, increases or decreases depending on the increase/decrease in outdoor temperature.
This warm air circulation system requires very little time to heat the room.
At very low outside temperatures, the system can be used in conjunction with other heating devices. To maintain proper safety and prevent accidents, adequate ventilation must be provided.
Defrosting At very low temperatures and high humidity outside air, frost forms on the heat exchanger of the outdoor unit of the air conditioner, which negatively affects the heating ability of the air conditioner. In this case, the defrosting mode is automatically turned on, and heating is suspended for 5-10 minutes.
During defrosting, the indoor and outdoor unit fans do not operate. "dF" lights up on the display.
During defrosting, some steam may be released from the outdoor unit (due to rapid defrosting), but this is not a sign of a malfunction of the air conditioner.
When the defrosting period is complete, the air conditioner returns to heating mode.
Additional functions and properties of the air conditioner Ionizer function Your air conditioner is additionally equipped with an air flow ionizer, which saturates the air with negatively charged ions that trap dust particles, bacteria and mold spores. The air becomes cleaner and fresher. This function works constantly.
Cold Catalyst Technology Cold Catalyst Technology sterilizes air and eliminates unpleasant odors by breaking down methyl oxide, methyl hydrogen sulfate and other hazardous elements.
Silver Ion filter A filter containing silver ions promotes effective air purification/ Coating of heat exchangers Blue Fin Coating of heat exchangers of the external and internal units with anti-corrosion material Blue fin.
Auto restart function In the event of a power failure, the device automatically resumes operation with the previous settings.
Rules for installing an air conditioner You must make sure that there is no furniture or objects near the air conditioner that could interfere with air ventilation and normal operation of the air conditioner.
Do not install the air conditioner in the following places: places where flammable gas may leak, places where oil splashes or similar substances occur.
If you plan to use the air conditioner near hot mineral springs, where there is a high content of hydrogen sulfide in the air, or in coastal areas where the wind carries moisture from the sea, then before installing the air conditioner, you should seek advice from authorized service specialists or our company representative. In these situations, there is an increased risk of corrosion, which can lead to problems with the operation of the air conditioner.
It is necessary to equip the condensed water drain from the indoor unit in such a way as not to create inconvenience to other people.
The air conditioner should not be installed in the laundry room.
Noise during operation of the air conditioner Before installing the units, you must make sure that the supports intended for them are reliable. Supports and fastenings should also not increase noise and vibration during operation of the air conditioner.
The cold/hot air released through the outlets of the outdoor unit of the air conditioner, as well as the noise during its operation, should not create inconvenience to people living in the neighborhood.
Do not place any objects in close proximity to the inlet and outlet grilles of the outdoor unit of the air conditioner. This may cause the air conditioner to malfunction and cause increased noise levels.
If you hear any unusual noise when the air conditioner is operating, you must contact authorized service personnel or our representative office.
Installation Instructions To ensure the normal operation of the air conditioner, please have it installed by qualified service personnel according to the instructions below.
Choosing an installation location Ceiling
– – –
Wiring connections of indoor and outdoor units of the air conditioner It is necessary to make wire connections of the indoor and outdoor units of the air conditioner in accordance with the electrical diagrams.
Note:
Incorrect connection of wires can lead to malfunctions of the air conditioner and damage to its working elements.
A damaged power cord must be replaced immediately. To do this, contact the manufacturer's representative office or an authorized service center.
When installing the unit, ensure that it is easily connected to the power outlet. Installing the outdoor unit The outdoor unit must be installed on a strong support or stand, the surface of which must be strictly horizontal.
– – –
Bleeding air from the system Place the flare nut of the connecting tube onto the valve connector of the outdoor unit and tighten it to the torque specified in the table.
Bleed the air from the indoor and outdoor unit system as follows:
Remove the two valve plugs from the outdoor unit.
Unscrew the flare nut connecting the large tube to the lower pressure valve half a turn.
Using a socket wrench (under the cap nut), loosen the high pressure valve core 1/4 -1/2 turn.
Bleed air through the flare nut of the large tube for approximately 10 seconds.
Then tighten the flare nut to the torque indicated in the table.
Tighten the plugs on the high and low pressure valve cores (with a tightening torque of approximately 49 N*m).
Tightening the bell tube
– – –
Checking for leaks After completing the pipe connections, you need to check that there are no leaks in the connections - using a special device or soapy water. If a leak is detected, it must be repaired immediately. Wiring connections of the outdoor unit Remove the contact panel cover, connect the wires to the corresponding terminals, following the supplied electrical connection diagram.
Check the strength of the contact clamps.
Secure the contacts with the clamping plate, and replace the contact panel cover.
The final stage of installation: Wrap the joints with thermal insulation material and wrap it tightly with polyethylene tape.
Secure the wrapped tubes to the interior wall of the room using wall fasteners.
Seal remaining gaps in wall openings to prevent rainwater from entering the room.
Test run of the air conditioner Connect the air conditioner to the power supply, check the operation of the buttons on the remote control.
Check the operation of the temperature setting and timer functions.
Check the operation of the condensate drain.
Make sure there are no extraneous sounds or excessive vibrations when the air conditioner is operating.
Make sure there are no refrigerant leaks.
Inspection and maintenance Depending on operating conditions, over several seasons of operation (from 3 to 5 years), contaminants accumulate in the inside of the air conditioner, preventing its further efficient operation. Therefore, in addition to the usual care of the air conditioner, it is recommended to check and maintain it. To do this, you should contact the representative office of the trading company (in this case, a fee will be charged for maintenance).
Care and maintenance Before starting maintenance, you must turn off the air conditioner and disconnect the power cord from the power outlet.
Before the start of the operating season you must:
Make sure that there are no foreign objects blocking the inlet and outlet openings of the indoor or outdoor unit.
Make sure that the fastening of the air conditioner units is secure (that the fasteners are not damaged by corrosion).
Check the grounding of the air conditioner.
Clean the air filter if necessary. Connect the air conditioner to the power supply.
Insert batteries into the remote control.
During the operating season it is necessary:
Clean the air filter meshes (at least once every two weeks).
Remove the air filter mesh from the indoor unit:
Gently press the bottom corners of the filter mesh to release it from the clamp.
Remove the filter mesh by gently pulling it towards you.
Wash the air filter mesh.
If the mesh is heavily soiled, it is better to rinse it with warm water (temperature about 30°C). Then the mesh should be air dried
Notes:
Do not use boiling water to wash the filter mesh.
Do not dry the filter mesh over a fire.
Do not remove or stretch the filter mesh with excessive force.
Put the air filter mesh in place.
Do not allow the air conditioner to operate without an air filter mesh. This will lead to contamination of the internal parts of the air conditioner, deterioration in its performance or failure.
Cleaning the air conditioner To clean the air conditioner body, use a dry soft cloth or a vacuum cleaner.
If the surface of the air conditioner is very dirty, it can be cleaned with a cloth moistened with a neutral detergent.
At the end of the operating season, set the temperature to 30°C and turn on the air conditioner in fan mode for about half a day.
This procedure is necessary to dry the internal parts of the air conditioner.
Turn off the air conditioner and unplug the power cord from the power outlet.
When turned off, the air conditioner consumes about 5 W of electricity. Therefore, for reasons of economy and safety, it is recommended to disconnect the power cord from the power outlet during long breaks in the operation of the air conditioner.
Clean the indoor and outdoor units from dirt.
Remove the batteries from the remote control.
Note:
If the air filter mesh is very dirty or clogged with dust, this will affect the air conditioner's efficiency in cooling or heating the room, and will also lead to increased noise during operation of the air conditioner and increased energy consumption.
Procedure for disassembling and repairing an air conditioner
If it is necessary to disassemble or repair the air conditioner, you should call specialists installing and servicing air conditioners from an authorized service center.
In the event of abnormal phenomena (for example, a burning smell), you must immediately turn off the air conditioner, disconnect the power cord from the network, and contact an authorized service center.
Before contacting the warranty service center Please check the following before contacting the warranty service center:
The air conditioner does not turn on.
The plug is not inserted into the socket? Air conditioner Power outages programmed for power supply, burnt out on timer? fuse?
The air conditioner does not cool or heat the room well. The temperature is set. The air filters are clean. Are the windows and doors closed?
Right? (not clogged)?
The air conditioner does not cool the room well The room is exposed to direct light In the room is used In the room, perhaps sunlight? heating devices? too many people?
The room temperature is not regulated (too cold or too hot) Is the temperature set in "CONT" mode?
In "CONT" mode, the air conditioner operates continuously, regardless of the room temperature.
If, after performing the above checks, the cause of unsatisfactory operation of the air conditioner could not be determined, as well as in the cases listed below, the air conditioner must be turned off and contact a service center.
Contacting a service center In the following cases, immediately unplug the power cord from the power outlet and contact a service center:
The cord or plug often burns out. The plug housing or fuse is broken, or the power supply is too protective and the circuit breaker is tripped. hot. power supply
The air conditioner creates interference, Difficulties in supply During operation, commands from the air conditioner remote control that affect the operation are heard from the TV, radio, and other remote controls. extraneous sounds.
devices.
If, after pressing the "ON/OFF" button, the air conditioner malfunctions, you must turn it off and disconnect the power cord from the network. After 3 minutes, the air conditioner can be turned on again. If the air conditioner still does not work properly, contact a service center.
Need to know!
– – –
Technical characteristics Models PS 0812Ni BIO 3D, PS 1012Ni BIO 3D, PS 1212Ni BIO 3D – household air conditioner, wall-mounted split system of the Polaris brand, Ni BIO 3D series
– – –
Note: Due to ongoing changes and improvements, there may be some differences between the instructions and the product. The manufacturer hopes that the user will pay attention to this. Information about certification The device is certified for compliance with regulatory documents of the Russian Federation.
Estimated product life: 8 years Warranty period: 1 year from the date of purchase
Manufacturer:
Thexton Corporation LLC 1201 Market Street, Wilmington 19801, Delaware, USA
GUARANTEE OBLIGATION
Product: Wall-mounted split system Models: PS 0812Ni BIO 3D, PS 1012Ni BIO 3D, PS 1212Ni BIO 3D This warranty is provided by the manufacturer in addition to, and in no way limits, the consumer rights established by applicable law.This warranty is valid for a period of 12 months from the date of purchase of the product and covers the warranty against defects in materials and workmanship. In this case, the consumer has the right, among other things, to have the product repaired free of charge.
This warranty is valid subject to the following conditions:
1. The warranty applies to all models manufactured by Texton Corporation LLC in countries where warranty service is provided (regardless of the place of purchase).
2. The product must be purchased exclusively for personal household needs. The product must be used in strict accordance with the operating instructions in compliance with the rules and safety requirements.
3. The manufacturer’s obligations under this warranty are fulfilled by sellers - authorized dealers of the manufacturer and official service centers. This warranty does not apply to products purchased from sellers not authorized by the manufacturer, who are independently responsible to the consumer in accordance with the law.
4. This warranty does not apply to product defects resulting from:
Chemical, mechanical or other impact, ingress of foreign objects into the product;
Incorrect operation, which consists of using the product for purposes other than its intended purpose, as well as installing and operating the product in violation of the rules and safety requirements;
Wear of trim parts, lamps, batteries, protective screens, debris storage devices, belts, brushes and other parts with a limited service life;
Repair of a product performed by persons or companies that are not authorized service centers*;
5. This guarantee is valid upon presentation together with the original of this coupon, the original sales receipt issued by the seller, and the product in which defects were found.
6. This warranty is valid only for products used for personal household purposes and does not apply to products used for commercial, industrial or professional purposes.
"INS-105/-106/-110" TU RB 101113067.018 – 2003 Contents 1 Purpose... "State Aerospace University named after Academician S.P...."
“Microprocessor-based relay protection device RZL-05.Dx BB OPERATING MANUAL AAPTs.648239.076 RE MICROPROCESSOR RELAY PROTECTION DEVICE RZL-05.Dx BB ATTENTION! Do not turn on the device until you read the manual. The reliability and durability of the device is ensured not only by the quality...”
“Topic 2: Fixed assets of the organization 2.1. Structure and valuation of fixed assets Fixed assets are a set of production, tangible and intangible assets that operate in the production process over a long period of time, while maintaining their physical form throughout the entire period...”
We will delete it within 1-2 business days.
OS
