On your PC - a topic that we will consider today. Indeed, without this device in the modern world of communications, chats, Skype and blogs, you somehow feel not very comfortable. It seems that it is not an essential item (you can communicate without it), but the absence of this device greatly limits the range of possibilities. Video conferencing, webinars, training videos, just the opportunity to show a new hairstyle or your cat to a friend from another city - this is simply impossible without a webcam.
There are other arguments that make using a camera very, very useful: for example, you can install a webcam in your home, and in our absence it will be able to act as a security guard. The camera will turn on when the motion sensor is triggered - the front door opens, someone enters or leaves the apartment. These records can be viewed remotely by configuring Internet access. Thus, you do not have to worry too much about the safety of your property - the camera will record changes in the apartment and send a signal to your mobile phone or send a message by e-mail.
So, let's begin. How to install a webcam:
1. We purchase this device at the nearest electronics store. It is advisable to stop the choice on branded products from manufacturers with a good reputation. Practice shows that "know-name" masterpieces, apart from a pleasant price, do not represent anything good anymore.
2. The set with the camera always comes with drivers for the device, written to the disk.
3. Make sure your computer has a working sound card, audio speakers, and a working CD-ROM drive.
4. Insert the disc that came with your camera and launch it.
5. Follow the instructions to install the device to your system.
6. Reboot your PC.
7. After restarting the computer, you can safely use the device and have fun.
We've looked at how to install a webcam using a special disk that comes with the kit. However, there are times when (for various reasons) the installation disc is missing. Let's take a look at how to install a webcam on a computer if it is missing or damaged:
1. Write down your webcam model.
2. Go to the manufacturer's website and in the "Support" section, find and download drivers for your device to your computer.
3. Install them on the system.
4. Restart your PC.
5. Connect the camera and make sure it works (you can check if the equipment is working properly using Skype).
6. Install additional video, audio, or imaging software as needed.
What I would like to draw your attention to: if you are planning a “part-time” job (security guard) for your webcam, make sure that your model is suitable for this. There must be sufficient space on the hard disk of the computer to record video files. In addition, you will need to install special software to accomplish these specific tasks.
For a start, you can try "iSpy" - this program will allow you to exercise full control over your territory (apartment, house, garage, site perimeter, street monitoring, internal premises). Of the amenities: support for the Russian language, enabling recording by sound or motion, the ability to remotely control, as well as broadcasting and viewing images from the camera in real time.
There is another option that will allow you to control what is happening in the apartment, garage or in the yard of your house. Wireless webcams that transmit images using Wi-Fi greatly simplify the work of monitoring objects under observation. Several devices can give a clear idea of what is happening in different points of the protected area, and you can see in advance and prevent possible attacks on your private property.
How to install a wireless webcam is a topic for a separate review. In a nutshell: it needs power and a Wi-Fi network through which the picture will be broadcast. The absence of wires will significantly improve the mobility of the device, it becomes possible to hide the camera, and, as a result, you get full control over what is happening.
I agree with you friends, sometimes searching for a device driver (especially an outdated one) turns into a whole adventure that can be remembered for a long time. After all, there are a lot of manufacturers of computer and other digital equipment. Enterprises open and close or merge, change their name, and so on. Computer firms, in turn, trying to maximize their profits, buy for sale the products of not very well-known manufacturers who do not even have their own website, especially for small computer firms. I am often approached by people who bought a web camera or any other computer device, but the drivers were not included or included, but for the old Windows XP operating system. As the sellers say - "You connect the device and Windows will find everything by itself, and if it does not, then this very Windows you have is unlicensed", that's the whole conversation. This is wrong friends, so I always advise people to clearly say in the store what they need and require the accompanying drivers on the CD for the operating system that they have installed. What to do, times are now.
Two of our readers write about the same webcam. A long time ago I had such a ZSMC USB PC Camera (ZS211), then I bought a better one, and put the old camera in a box of used devices, then I wanted to give it to someone else, but I forgot about it. Without hesitation, I dug up my box among all the computer junk (my wife had wanted to take it to the trash for a long time, but we were lucky) and found a camera.
On one of my computers the licensed operating system Windows 7 is installed. Well, I think, now I will connect our camera and Windows 7 will select the drivers automatically, but that was not the case and the message “The software for this device was not installed” is waiting for us, and it appeared in the device manager an unidentified device in a yellow circle and an exclamation mark inside, the camera naturally did not work.
Well, now let's try to install the driver for the webcam and choose the method that our readers resorted to.
How to install a driver for a webcam using the "Snappy Driver Installer"
Personally, I always use this method first.
Download the driver assembly "Snappy Driver Installer" on the developer's official website:
https://sdi-tool.org/download/
Select the full SDI Full driver package (suitable for those who want to have a full set of drivers with them and not depend on the availability of Internet access, size 12 GB on your hard drive) and click "Download"
The folder with the drivers is downloaded to our computer, we will run the installer of the SDI_x64_R496.exe program directly from the folder.
If you have 64-bit Windows installed, then run the corresponding executable file SDI_x64_R496.exe
"Allow access"
In the main window of the program, the drivers that need to be installed are highlighted in pink and marked with the inscription “ Driver available for installation", And drivers that need (according to the program) to be updatedmarked with the inscription« Update available (more suitable)". This list will contain the driver for your webcams.
To install or update drivers, mark them with checkboxes and press the "Install" button (you can create a restore point before installing).
A short (several minutes) process of installing drivers begins.
How to install a driver for a webcam using DriverPack Solution Lite
We go to the site of the program for updating drivers - DriverPack Solution
http://drp.su/ru/download.htm
So, what should we choose here with you. Let's figure it out slowly and in order. Firstly, the driver for the web-camera can be installed using a small free program DriverPack Solution Lite. It downloads in seconds and also selects and installs the required driver.
The second method is longer, but as a result we will end up with a DVD with DriverPack Solution drivers, which we can carry with us and install drivers for everyone who needs it and does not need it.
Let's analyze both methods. The first is the easiest way.
Friend's tip: Before starting work, create a point.
Download DriverPack Solution Lite program,
install it,
We accept the license agreement,
if you don't need the free Hamster archiver, uncheck the box.
If the paid optimizer TuneUp Utilitie 2013 is also not needed, uncheck the box.
If the program does not start automatically, run it from the shortcut.
Online tab, as we see two drivers need to be installed: the driver for the mouse and our web camera. We can skip the driver for the mouse, and install it on the web camera.
Let's put a tick on the Settings and Expert mode, after all, we are experts and some others. Click on the button with the ID-equipment code of our camera USB \ VID_0AC8 & PID_307B & REV_0100
We download such a file, this is the driver installer.
Before putting a tick on "I agree" look at Driver type Image capture device. This driver is not digitally signed.
A digital signature is an electronic security label that identifies the publisher of the software. Most manufacturers sign the drivers they create, but here we have to trust the creators of the DriverPack Solution program. And our friends have no choice, since there is practically no driver for this web-camera for Windows 7. Further.
And in this place of installation, as our reader said, two files: Domino.exe and ZSSnp211.exe were asked to start at startup, it will be noticeable only for those users who have installed the free startup manager AnVir Task Manager.
Let me reassure you friends, both files are safe.
Domino.exe is located in the C: \ Windows folder and is required for the functioning of webcams, in most cases it is safe.
The ZSSnp211.exe file is located in the C: \ Windows folder, it is also installed with some webcams, like the domino.exe process
Ready. Our camera is working.
If you have the free DAEMON Tools Lite program, then you do not need to burn anything to disk, you can simply DriverPack Solution and immediately run the driver installer.
Again we go to the site of the program for updating drivers - DriverPack Solution
http://drp.su/ru/download.htm
Click download, for this we need a free utorrent program, which can be downloaded from the link http://www.utorrent.com/intl/ru/ 
Or you can mount a disk image in DAEMON Tools Lite, and work directly with the image.
So, from the DVD you ran the DriverPack Solution program
Or from the image, such a window opens.
Go to the Drivers tab. We mark the Settings and the Expert Mode. As you can see, full information is provided on the drivers of our computer. One driver is not installed on our webcam. We mark it with a tick and select Intelligent installation (recommended). That's all, the driver for our webcam is installed.
Conclusion: This method will undoubtedly help you install drivers in difficult situations, but remember - in these assemblies, drivers are not always the latest versions, and if it comes to installing drivers on the motherboard (chipset), video card, then try to first visit the official website of your device and download latest drivers. And don't forget about System Restore.
The Internet offers many ways for people to communicate. Even in the very recent past, users were mainly content with text-based communication methods through chats, e-mail, etc.
Due to the significant improvement in connection quality over time, voice communication with simultaneous video transmission has gained popularity.
The key element for doing this is the webcam (VC). To take advantage of its advantages, you should be able to connect the device and configure it correctly.
Below is a description of all the necessary steps to correctly launch and configure a webcam on a computer on Windows 7.
What is VK?
This is a device for recording video (and sometimes sound) into a computer for further transmission through the global network to a designated client. Most laptops are already equipped with VC, and for stationary computers, it is purchased and installed separately.
Most often, external webcams are attached to the monitor with a special clip, but there are also models that can be installed separately on the table. 
The procedure for connecting and configuring VK
Usually, the already built-in camera in laptops is in standby mode, that is, it is almost completely ready for full-fledged use. You just need to open any program for communication, for example, Skype, and specify the required video settings in it.
Sometimes the application cannot detect VK. In this case, the camera must be turned on. In laptops, for this purpose, the simultaneous pressing of the following two keys is often used: "Fn" and the button with the "camera" icon printed on it.
Functional ones are also often used - "F1 ... F12". Therefore, it is advisable to check the user manual from the accompanying documentation for the PC.
It is also very useful to know how to turn on the camera on a Windows 7 computer programmatically. To this end, you need to perform just a few sequential steps:
And if VK is not detected in the device manager?
In this case, the hardware should be provided with suitable software.
Usually "Windows 7" itself copes well with the installation of the necessary programs. You just need to click on "Update Drivers".
In the next window, it is recommended to click on the first option.
If the appropriate software could not be installed in automatic mode, then you will first have to familiarize yourself with the exact name of the VC from its accompanying documentation, and then install the drivers from the manufacturer's official source.
How to connect an external VK
Most often, the connection is carried out via a complete USB cable. Simply plug the cable coming from the VC must be inserted into the corresponding port on the computer.
In the complete absence of any reaction from the PC after connecting the VC, it is possible to conclude that the wire or connector in the computer is faulty.
How to check the performance of the latter? To do this, you will need to install some (known good) USB device into the connector, for example, a USB flash drive.
In the case when the external media is normally displayed in the Windows 7 explorer, it means that everything is in order with the USB port, but it is necessary to replace the defective cable or the VC itself.
Outdoor versions of webcam models are mainly equipped with a software disc. Therefore, after connecting the device to the PC, it is necessary to insert the "CD" into the optical drive and install the software.
Usually proprietary programs have a wide range of settings, which significantly increases the usability of the equipment. 
Third-party applications for VK
Many useful utilities have been developed that work perfectly in the Windows 7 environment. Below are the best ones.
Possesses wide functionality. Among them, it should be especially noted the options for zooming, video recording, convenient screenshots and the addition of a large number of effects. 
It is very similar to the previous utility, but has much wider possibilities for applying effects. 
Enhances the image quality. Adds funny effects.
The application specializes in video surveillance and has the ability to continuously stream video over the global network. Supports the simultaneous operation of several VCs. All captured videos are saved on the server. Allows you to remotely control turning on the camera, and also turn it off. 
Thanks to the internet, people are constantly finding new ways to communicate. More recently, the most popular means of communication have been chat rooms, social networks, e-mail, and more.
Now there is an opportunity not only to talk to another person on the Internet, but also to see him. This became possible thanks to Skype and other similar programs. True, for communication it will not be enough to install and turn on Skype, you also need to know how to turn on a web camera on Windows 7. Below we will try to figure out how this is done.
The first step is to connect the camera to your computer. On a laptop, it is already installed and built into the computer itself. It should be connected to a stationary PC via a USB port. Normally, the camera is powered automatically from the computer system.
However, there are models that need additional batteries or connect the power cable.
Today there are two variants of cameras. The first is attached to the top edge of the monitor using a specialized mount.
The second option is a camera on a special leg with a built-in microphone.
To do this, you will need to do something, such as.
How to turn on a webcam on Windows 7 and configure it
An external camera refers to an additional device. It must be connected externally in most cases to a laptop USB port. Since almost all webcams are equipped with a USB interface, they can work with any computer.
The shapes and designs of external video cameras are completely different. Many have their own and a switch.
In order for the connection to be complete and the signal is transmitted without interruption, you can use extension cables. They power up the devices additionally and improve the quality of the signal transmission.
An active type extension cord, if necessary, will allow you to carry the camera away from the computer at a distance of more than 10 meters. Passive is a little shorter and will not allow you to move away from the camera by a maximum of 5 meters. They look like this.
These cameras are sold complete with a CD / DVD disc containing drivers and software from the manufacturer.
In order to connect an external video camera to a computer and configure it, you need to connect it to the port and turn it on if the camera has a button to turn it on. You need to insert a disc into the drive and install the software.
The program that is installed on the disk will help the user to configure absolutely all parameters for working with a video device, for example, adjust sound, password protection, and more.
However, modern developments allow the inclusion of removable cameras without the need for manual installation. After connecting the device, Windows will find it and automatically configure it.
Camera setup in Windows and in various applications
Usually just turning on the camera is not enough. In order to see your appearance, you need to check how the device works. To do this, go to the control panel and find a section of cameras and scanners there. If the device is working, then after double-clicking on the camera, an image will appear on the screen.
A significant number of users buy a video camera for the first time precisely to use all the functions of an application such as. It is very convenient and easy to set up. It is even easier to set up the camera there than in Windows itself.
Having launched the program, you can start preparing the video image. At the top there is a tool parameter, where at the bottom you need to click on settings. A window will appear in which we select what exactly needs to be changed. In this case, you need a video setting. Below you need to click on the word "nobody".
Then left-click on the webcam settings. A new window will appear where you can adjust the parameter values. Conveniently, you can watch their changes in real time.
Enabling the built-in device in the laptop
In a laptop, the camera is initially disabled. It does not work in standby mode. Therefore, you must turn it on before using it. The easiest way is to use the hardware keys. One of the keyboard shortcuts is the Fn button.
The second key depends on the laptop model. In most cases, the function buttons are F1 or F12.
To do this, study the purpose of the keys, or even better, the instructions attached to the laptop. The meaning of these keys is shown as small pictures in the corner of the buttons. For example, Fn plus V, which has a camera icon in the corner.
After the device has been activated, some applications can automatically turn on the camera and broadcast the image to the interlocutor by default.
Almost all modern laptop models are sold with a built-in webcam. Considering that video communication is becoming more and more popular among computer users every year, this is very convenient.
But suppose you did not use the camera, and after making the first call, you noticed the image - very light, dark, black and white, and this option is also possible - the camera simply did not turn on. In any case, you need to set up a webcam on a laptop for its correct operation in the future.
Often times, camera problems are easy to fix. If all else fails, then there may be a hardware problem and the laptop needs to be brought in for repair. To buy a brand new, or not entirely new, laptop with confidence that the camera is in working order, I advise you to read about several ways to test the camera on a laptop.
So the first thing to do is check the installed drivers on the camera... We go "Start" - "Control Panel"... Here we open the item "Device Manager".
Find the item in the list and expand it by clicking on the small arrow. The available connected devices will be displayed here. The one that is responsible for the camera will be called like Web, Cam, Video. Make sure that there is no yellow exclamation mark or a red cross next to the name on the pictogram - this may indicate that the drivers have been installed incorrectly or are missing.
Right-click on the desired device and go to the "Properties" context menu item.
On the General tab in the box "Device state" should be written "The device is operating normally."... This means that the camera is in good working order. If there is another inscription, go to the "Driver" tab.
Here you can see which driver was installed, update or remove existing drivers.
If problems with the camera started after the laptop was repaired, then click "Update" and select "Automatically search for updated drivers"... The wizard will search for drivers on your laptop and on the Internet. If he finds drivers on the laptop, install them and the problem will be solved.
You can install the drivers yourself. An installation disc must be included with your laptop or camera. Insert it into your laptop, then follow the steps in the setup wizard. As a result, you will install all the drivers necessary for the connected devices, including the camera.
If you cannot find the disc, or you bought the camera separately, and the laptop simply does not have a disc drive, it’s not scary. You can download the drivers from the official website of the laptop manufacturer for free. Then install the drivers for the device yourself.
Special programs can also help in finding and installing drivers on a laptop. You can use the free Driver Pack Solution program. You can download it and read about it in more detail by clicking on the link.
After installing the drivers, be sure to restart your laptop.
The second thing to do is check if the camera is connected in device manager. We go into the already familiar device manager and open the item "Imaging devices"... Look at the icon of the device responsible for the camera, there should be no arrows near it, as shown in the figure.
If it is, right-click on it and select from the context menu "Engage".
The device manager will blink, that is, it will be updated, the arrow will disappear, and the camera should work.
The third thing to do is to install a special a program for working with a web camera... You can download it from the Internet, for example, LiveCam, WebCam Max or SplitCam. There are also various portable versions that do not need to be installed on your computer, download and use.
Start the selected program. After that, a window should appear with the image entering the camera, and a green indicator near the camera itself will light up, indicating that it is working.
In such programs, you can configure the camera. Find the appropriate item. I have it "Options" - "Video Capture Filter".
Here you can change some parameters of the camera, and make the image normal for perception.
If you do not want to download any programs, then consider the fourth point. It is suitable for those who have Skype is installed on the laptop... You can also configure the camera using it. Go to "Tools" - "Settings".
Next, on the "Basic" tab, open "Video settings"... Here, in the main window, the video from the camera should appear; to change the settings, click on the button "Webcam Settings".
In the next window, you can select the desired settings for the camera image.
I hope the described methods will help you set up the camera on a laptop: the image from it will be displayed during video calls, with normal brightness and contrast.
Rate article: (1
estimates, average: 5,00
out of 5)
Webmaster. Higher education in the specialty "Information Security" .. Author of most articles and lessons of computer literacy
