Install Optional Products - DriverDoc (Solvusoft) | | | |
This page contains information about installing the latest O2 Nokia C2-01 driver downloads using a driver update tool.
O2 Nokia C2-01 drivers are tiny programs that enable your Mobile Phone hardware to communicate with your software operating system... Maintaining updated O2 Nokia C2-01 software prevents crashes and maximizes hardware and system performance. Using outdated or corrupt O2 Nokia C2-01 drivers can result in system errors, malfunctions and failure of hardware or computer. Moreover, installing the wrong O2 drivers can make these problems even worse.
Advice: If you are inexperienced with updating O2 device drivers manually, we highly recommend downloading the O2 Nokia C2-01 Driver Utility. This tool will download and update the correct Nokia C2-01 O2 driver versions automatically, protecting you against installing the wrong Nokia C2-01 drivers.
About the author: Jay Geeter ( Jay geater) is the president and director general Solvusoft Corporation, a global software company focused on innovative service software. He has been passionate about computers all his life and loves everything related to computers, software and new technologies.
By dialing the combination * # 0000 # you will see the firmware version installed in your Nokia mobile phone.
As you know, she is responsible for all functions and the normal operation of the phone. This software is constantly being improved and from time to time there is a desire or need to update it.
You can see what this will give in the article.
Are you familiar? So read on ...
Nokia mobile phone flashing methods:
Flash phone nokia you can absolutely different ways and programs.Refresh software if the phone works normally, you can both by air and through software.
- To update your Nokia phone firmware over the air, just go to menu> settings> phone> phone management and click update device.
But this update method is not supported by all phone models, but only by the newest smartphones.
- It is possible to update the software using the official Nokia Software Update. Read on.
The above two methods are officially recommended and are guaranteed. The rest are considered unauthorized tampering with the phone software and are carried out at your own peril and risk, since there is a certain probability of laying the phone down after an unsuccessful firmware.
The firmware itself for the right model Nokia phone can be downloaded in the section.
And you can install it in the following ways:
- Flash a Nokia phone that does not turn on due to a software glitch or for other reasons - we need a special programmer for flashing phones that supports the desired class of Nokia phones. The most common and most versatile of these programmers is the UFS.
You can also flash Nokia at home using one of the programs:
-
- .
Some models are supported by both programs, some only by one of them, but there are also those that do not support the firmware at all by free software.
Read the instructions at the following links:
.
Before starting the firmware, carefully read the instructions, prepare everything you need, check all the pros and cons, and only then get to work. If something goes wrong during the firmware process, you only have yourself to blame.
Nokia 2 runs under the operating system Android 7.1.1 (Nougat), will be updated to Android 8.0 (Oreo)... Its performance is rated 5 out of 5 (in its segment). This smartphone is high performance. Here are the characteristics of the device, instructions on how to reset the settings, flash the device and, of course, how to get root rights on Nokia
Root on Nokia 2
How to get a root for Nokia 2 see instructions below.
Below are universal programs for obtaining root rights for devices on Qualcomm Snapdragon
- (PC needed)
- (Route using a PC)
- (popular)
- (root in one click)
If the superuser (root) rights could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.
Characteristics
- Screen: LTPS capacitive touchscreen, 16M colors, 720 x 1280 pixels, 5 inches
- Operating system: Android 7.1.1 (Nougat), will be updated to Android 8.0 (Oreo)
- Memory: ROM / RAM 8 GB, 1 GB, microSD up to 128 GB
- Processor: Qualcomm Snapdragon 212 (MSM8909v2), Quad-core 1.3 GHz Cortex-A7
- Camera: 8 MP, autofocus, LED flash, front 5 MP
- Video: [email protected]
- Bluetooth: 4.1, A2DP, LE
- Internet: LTE cat.4 150/50 Mbit / s, HSDPA, HSUPA, EDGE
- Wi-Fi: 802.11 b / g / n
- GPS: A-GPS, GLONASS, BDS
- Battery: Li-Ion 4100 mAh
- Communication: GSM / HSPA / LTE, two SIM cards
- Dimensions: 143.5 x 71.3 x 9.3 mm
- Release date: 2017, October
Nokia 2 review
Nokia 2 is probably the most cheap smartphone from this company lately. But in fact, it is quite good, given the fact that the hardware base is very stable and efficient, it is represented by the Snapdragon 212 chipset. Of course, the volume random access memory disappointing, since 1 GB is really small, multitasking will suffer very significantly. You will have to create a 2 GB SWAP partition, while a microSD card must be taken, in this case, take at least class 10.
But the autonomy of the device is much better than that of the same Nokia 7, here the cheap smartphone wins the middle, such things.
--
Another review from the owner
--
I don't know about the others, but I have a stupid phone! For its price, you can take a more powerful Chinese! Its only plus is the battery, it can live without charging for a week or a day with intensive use. Otherwise, there are only drawbacks, and the biggest drawback is that it really lacks RAM. On mine it is not possible to listen to music from social networks in background and at the same time browse the Internet through a browser. background applications just close due to lack of RAM.
--
the phone is frankly ugly.
annoying is the lack of the ability to transfer applications to the sd card in separate use mode.
if the sd card is combined with the internal memory, then you can transfer applications to it, but you cannot copy something to the sd card, for example e-books! when connected to a computer, only inner memory phone. and the sd area is not available.
useless brick!
Firmware for Nokia 2
ァ Official firmware(factory) Nokia 2 TA-1035 Official Factory Firmware // E1M-037C-0-00WW-B03nb0_Nokia 2 -
ァ Custom firmware expected
Nokia 2 firmware can be done in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Do not forget to write a review for 4-10 lines about the smartphone in the subject, this is important. The official Nokia website, unfortunately, will not help solve this problem, and we will solve it for free. This Nokia model has on board Qualcomm Snapdragon 212 (MSM8909v2), Quad-core 1.3 GHz Cortex-A7, respectively, there are such flashing methods:
- Recovery - flashing directly on the device
- A special utility from the manufacturer, or
What custom firmware are there?
- CM - CyanogenMod
- LineageOS
- Paranoid Android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK (MoKee)
- FlymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and disadvantages of a Nokia smartphone and how to fix them?
- If 2 does not turn on, for example, see White screen, hangs on the screen saver, or the notification indicator only blinks (possibly after charging).
- If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
- Doesn't charge (usually iron problems)
- Doesn't see the SIM card (SIM card)
- The camera does not work (mostly hardware problems)
- Sensor does not work (depending on the situation)
Hard Reset for Nokia 2
- Settings-> Recovery and reset
- Reset settings (at the very bottom)
How to reset your pattern
How to reset graphic key if you forgot it and now you cannot unlock your Nokia smartphone... On model 2, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -
Action plan:
1. We check whether our turned off phone is detected when connected to a computer via a USB cable, should be detected as Nokia USB Flashing Generic Nokia USB Flashing Parent. Disconnect the phone from the computer.
2. Just in case, turn off antiviruses and firewalls. If the Nokia manager was installed ( Nokia Suite) then you need to delete it in order to avoid problems. Install Phenix, do not change the paths, then unpack the firmware, also do not change the paths, because it is unpacked into a directory Phenix, (for 32 bit C: \ Program Files \ Nokia \ Phoenix \ Products \ for 64 bit C: \ Program Files (х86) \ Nokia \ Phoenix \ Products \) launch Phenix
go to File-> Open Product find our RM (in this case RM-721) press OK
further point Product code, open
We are looking for a firmware with Russian language (the title will contain ru) and click OK
then go to options
check the list of flashed files red should not be if any, delete with the button delete, but the list must not be empty !!! Further OK we press Refurbish
A window will appear and at this very moment we connect the switched off phone to the computer, it should be defined as Nokia USB Flashing Generic Nokia USB Flashing Parent and press OK
the firmware process has started, if suddenly Phenix throws an error (which is very rare, I have never had one), do not confirm in any case, wait until the process is over. the program will crash and the firmware process will not be completed
after completion, the phone will turn on itself, then finish with the button OK
You can use it, you restored the phone, in my practice, about ten phones were restored, I did not meet any problems about them in the article ...
I bow for this ...
Let's consider how to reflash "dead" Nokia phones that do not turn on using a service Phoenix programs... Screenshots are taken using the example of Nokia N8-00 firmware, but this procedure is suitable for all Nokia BB5 phones.
This guide is a translation of the article:
NOTE:
- This article is not intended to be a guide to action. All responsibility for the firmware of your device lies with you. Remember, you may void your manufacturer's warranty.
- The phone battery must be charged (you can check it on another phone).
- It is recommended that you close all applications (on your computer).
- Phoenix does not check the phone software version, and if installed more than old version, the phone may not turn on; so use newest version firmware.
- Always use the correct firmware version and check the product code on the sticker under the battery!
What do you need?
- Data cable via USB (miniUSB or microUSB).
- Nokia BB5 phone
- installed Nokia Phoenix Service Software
- suitable Nokia software
The procedure for flashing "dead" Nokia phones
1. Disconnect the phone from the cable. Make sure the phone is turned off. Remove and reinsert the battery if necessary.
2. Unpack the downloaded software to the "Products" folder in the Phoenix program directory (for example, "C: Program FilesNokiaPhoenixProductsRM-XXX").
3. Run Phoenix Service Software in Administrator Mode. (Windows Vista, 7: right click -> select in context menu the Run in administrator mode command; XP: Log in as an administrator).
From the Connections drop-down menu, select the "NO CONNECTION" connection type.
4. From the File menu select the Open Product option.
5. A window will appear in which you will need to select a code mobile phone... The product code is located on a sticker under the mobile phone battery. (Usually it looks like RM-xxx)
6. From the Flashing menu, select the Firmware Update option.
7. A window will appear in which you need to click the "..." button in the right upper corner to select the language pack / product code you want to reflash.
8. A selection window will appear. Select the product code you need / language pack and click OK.
9. In the Firmware Update window, check the Dead phone USB flashing checkbox to flash a "dead" phone.
10. Click the Update Software button to start the firmware update procedure.
If after updating the firmware the phone does not turn on, try running the procedure again, only instead of "Update Software" press the "Refurbish" restore button!
11. A window will appear with instructions. Follow these instructions: disconnect USB cable, press and hold the phone's power button for at least 8 seconds, then connect the USB cable and press the OK button in the window (if this method does not work, press the OK button, then press the phone's power button and immediately connect the USB cable).
Internet on Android
